Development of a 3D HUD using a tunable bandpass filter for wavelength multiplexing

A 3D stereoscopic head‐up display using a tunable bandpass filter to perform left and right image spectral separation is presented. Using a single filter reduces the size and the cost of the head‐up display optical engine and enables each spectral band to be accurately tuned. Experiments performed on the first prototype demonstrate the ability to continuously tune the bandpass frequency on 30‐nm range while keeping a 20‐nm bandwidth. Such a system avoids the use of a bulky and costly rotating wheel and enables the use of holographic optical elements known to be wavelength selective.     

不同通信模型下的全光树环网波长分配算法

研究了波分复用全光树环网在不同通信模型下的波长分配算法及其最坏性能分析.对于静态模型,证明了5L/2是树环网所需波长数的紧界.对于动态模型,提出了一种近似比为∑_i=1^hmax_r∈Ri[log|V(r)|]+h的波长分配算法,其中h为树环网的基树的层数,R_i为树环网中处于第i层的环的集合,|V(r)|为环r上的节点数.对于增量模型,提出了一种近似度为O[log₂(t+1)]的波长分配算法,其中t为树环网中的环数.     

Determination of Analytical Wavelength in Derivative Spectrophotometry

Abstract

The work presents two methods for preliminary determination of analytical wavelength when a binary system is analysed by derivative spectrophotometry. “The method of disturbing effect” involves the recording of derivative spectra of a series of two-component solutions where the concentration of one component of the mixture remains unchanged, whereas the concentration of the other changes. “The method of sixteen solutions” involves the recording of derivative spectra of a series of 16 solutions, in which to four concentrations of the one component correspond four different concentrations of the other component of the mixture.     

基于变量纯度的波长选择方法在近红外光谱分析中的应用

提出了一种基于光谱纯度值的变量选择方法。对光谱中各变量计算其纯度值后,按降序将相应变量排列,采用PLS交互检验按前向选择法选择最佳变量子集。用本方法对3组分混合物体系及烟草样品的近红外光谱进行变量选择,并与全谱变量建模的结果进行了比较。结果表明本实验给出的波长变量优选方法是一种比较有效和实用的变量筛选方法,通过变量筛选,可极大地减少光谱信息重叠,从而提高定量校正模型的预测精度和建模效率。     

3,5-二硝基水杨酸测定古尼虫草中多糖含量方法

根据蔗糖标准溶液做吸收曲线，作K(mg/A)值图选择标准糖含量线性范围和确定分析波长为520nm.,古尼虫草中的多糖转化成还原糖测定多糖含量。     

White organic light-emitting diodes from three emitter layers

Three-wavelength white organic light-emitting diodes (WOLEDs) were fabricated using two doped layers, which were obtained by separating the recombination zones into three emitter layers. A sky blue emission originated from the 4,4′-bis(2,2′-diphenylethen-1-yl)biphenyl (DPVBi) layer. A green emission originated from a tris(8-quinolinolato)aluminum (III) (Alq₃) host doped with a green fluorescent 10-(2-benzothiazolyl)-1,1,7,7-tetramethyl-2,3,6,7-tetrahydro-1H,5H,11H-[1]benzopyrano [6,7,8-ij]-quinolizin-11-one (C545T) dye. An orange emission was obtained from the N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB) host doped with a red fluorescent dye, 4-(dicyanomethylene)-2-tert-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB). A white light resulted from the partial excitations of these three emitter layers by controlling the layer thickness and concentration of the fluorescent dyes in each emissive layer simultaneously. The electroluminescent spectrum of the device was not sensitive to the driving voltage of the device. The white light device showed a maximum luminance of approximately 53,000 cd/m². The external quantum and power efficiency at a luminance of approximately 100 cd/m² were 2.62% and 3.04 lm/W, respectively.     

光分组交换中的波长变换器配置研究

首先对波长变换器的功能及分类进行详细的论述,然后,对波长变换器的配置进行分析,总结出两种波长变换器配置方法,即独占式配置方法和共享式配置方法.针对独占式配置方法,本文使用仿真实验的方法研究了在不同类型的波长变换器下交换节点丢包性能的差异.本文还对独占式配置方法和共享式配置方法进行对比研究.     

基于最小二乘法的光纤光栅Bragg波长直线拟合

针对基于可调谐法布里珀罗(F-P)滤波器的光纤光栅解调系统存在波长解调准确度不够高的问题,从理论上系统地分析了在解调过程中对光纤光栅B ragg波长进行直线拟合的可行性,即光纤光栅B ragg波长与F-P滤波器的调谐电压之间存在线性相关性。在实验研究的基础上,用最小二乘法对光纤光栅B ragg波长和F-P滤波器的调谐电压进行直线拟合,结果表明:它们之间的确存在密切的线性相关性。为提高拟合的效果,提出了分段直线拟合,它可以使测量误差降低至少1个数量级,从而提高了F-P滤波器光纤光栅解调系统的准确度。     

一种用于波长路由光网络的分布式快速波长预留协议

波长预留协议用于在光通道建立过程中预留和配置波长.目前已有的波长预留协议都把协议设计的目标定为降低网络阻塞率,没有一种协议设计把目标定为缩短光通道的建立时间和简化协议处理过程.然而更短的建立时间和更小的协议复杂度对于未来极其动态的光网络却是非常重要的.提出了一种新颖的用于波长路由光网络的分布式快速波长预留协议-目的端预留协议,它在保证网络阻塞率可以接受的前提下,不仅可以降低连接建立时间,还可以减少控制节点处理器需要处理的信令消息数量.仿真结果证明了这一点.