Output Model of Steel Plant

Based on the requirement of compactivity, continuity, and high efficiency, and taking full advantage of cushion capability of flexible parts such as external refining in new generation steel plant, an output model of steel plant was established in terms of matching between BOF and caster. Using this model, the BOF nominal capacity is selected, the caster output and equipment amount are computed, and then the steel plant output is computed.     

感潮河段交汇区水流特性数值模拟 --以宁波三江口为例

河流交汇为城市的发展提供了便利,对区域防洪、航运及河道演变影响重大。针对感潮河段交汇区域特有的非恒定往复流条件,以宁波三江口为例,运用Delft-3D建立二维水动力数学模型。基于实测水文和地形资料,引入四种评估参数对模型进行了率定与验证。重点分析了洪、枯两季涨、落急时刻,交汇区流速分布及水面形态等水流特性。结果表明:涨潮时,交汇区流场可类比分叉水流;落潮时,则为交汇水流;交汇区顶点及左支入汇侧下游存在两个低流速区,并可形成分离区;汇流区流速整体呈落潮大于涨潮的趋势,洪、枯季间最大流速相近。此外,涨、落急时刻典型特征断面水面呈单一横比降,且落急时刻比降明显大于涨急时刻;落急时,交汇口水面呈混合层附近高,两侧低的"马鞍形"分布。     

VCSEL的偏振特性随注入电流变化的实验研究

注入电流是影响VCSEL偏振特性的重要因素。谊论文通过实验，测量了VCSEL的出射光偏振特性随着注入电流的变化。观察到了两次偏振转换的过程，即随着注入电流的升高出射偏振光由椭圆偏振光——圆偏振光——椭圆偏振光——圆偏振光——椭圆偏振光的过程，并且在变化的过程中电流的变化范围很小。     

基于MPEG-2的数字业务协议模型

研究用MPEG-2承载广播网、通信网和计算机网的主要业务,分析了各主要业务的特点需求以及用MPEG-2承载多种业务的优势,提出了基于MPEG-2的业务协议模型和该业务模型在网络上实现的方法,最后陈述了模型应用中主要面临的挑战及解决办法。     

再入机动弹头控制系统六自由度仿真

使用制导和姿态控制系统一体化的设计思想，建立了弹头六自由度仿真的数学模型，实现了连续系统与离散系统的混合仿真．使用Visual C＋＋语言开发了仿真软件，经过仿真试验．证明该模型与传统三自由度模型相比更精确、更符合实际，验证了仿真系统的可信性。     

纯氧助燃预热铁包中废钢过程气流特性的数值模拟

低热值煤气铁包内燃烧预热废钢是提高转炉废钢入炉量的有效措施之一.基于标准k-ε湍流模型耦合涡-耗散燃烧模型,针对铁包内转炉煤气纯氧燃烧过程进行数值模拟研究,探讨气流分布特性及其对烘烤效果影响.结果表明,纯氧燃烧时高温气流速度大,从料堆中心进入、边缘排出,换热距离大,可有效提高低热值煤气燃烧的热利用效率;燃烧过程中铁包盖...     

Crystallisation behaviour of the iron oxide-devoid BOF slag with adding SiO2

The current research attempted to investigate the crystallisation mechanism of iron oxide-devoid basic oxygen furnace (BOF) slag with adding SiO₂. First, the glass sample was prepared by adding 29?wt-% of SiO₂ to BOF slag, followed by eliminating iron oxide by reduction process. Non-isothermal DSC analysis together with confocal laser microscopy, XRD and EPMA mappings were carried out to observe the crystallisation process. The glass sample showed that the crystallisation process started from the surface where the main phases were identified to be akermanite, merwinite and wollastonite. In addition, the crystallisation process was affected by the nucleation temperature which was decided by the heating rate because of the difference in the nucleation rate between wollastonite and Mg-rich phases. The current results could be used to propose the feasibility of utilising BOF slag as glass-ceramics by chemical modification with heat treatment, which controls the crystallisation behaviour.