An enhanced,acoustic emission-based,single-fiber-composite test

In the single-fiber-composite (SFC) test, a fiber imbedded in a matrix is loaded in tension, resulting in a fragmentation of the fiber. In the conventional version of this test, the final fiber fragmentation length distribution is used with a micro-mechanical model to determine the average fiber/matrix interfacial shear stress. In the enhanced version of this test, one also determines the applied stress at each fiber fracture, and from this, one can evaluate the strength of the fiber at short gage lengths. In our measurement system, we utilize an acoustic emission (AE) technique to detect the fiber fractures and to locate the fiber breaks and so determine both the fiber failure stresses as well as the fiber fragmentation lengths while the test is in progress. Critical to the success of this test is a broadband AE system that utilizes point-like AE sensors, procedures for evaluatingin situ, the wavespeed of the first wave arrival and signal processing techniques for determining the arrival time of this signal as precisely as possible for a broad range of wave shapes. Here we describe the application of such an enhanced SFC test procedure to investigate the failure of a Nicalon fiber in an epoxy matrix.     

封闭循环TEA CO2激光器用催化剂的实验研究

在不同的催化剂和不同温度的条件下,用磁氧分析仪监测了封离型TEA C0₂激光器中O₂含量随时间或脉冲次数的变化。对实验现象进行了分析。对几种催化剂的特性给出了详细的比较。     

降膜蒸发过程的数值模拟和传热传质分析

利用CFD软件对逆流降膜蒸发过程进行了实验模拟研究,研究了速度边界层、热边界层和浓度边界层的变化对降膜蒸发传热传质特性的影响规律;通过建立一维逆流降膜蒸发的数学方程编程求解出了对流传热传质的Nu数和Sh数,利用Fluent软件模拟出的实验结果采用回归分析得出了气液流量比Raw、流道的长宽比αL、空气进口无量纲温度θai以及空气进口Re数与Nu数、Sh数之间的无量纲关系式,可为降膜蒸发换热器的设计提供参考。     

基于增量式PID算法的帆板控制系统的设计

基于STC12C5A60S2单片机与增量式PID算法,实现对帆板系统的控制。该系统主要由键盘模块、显示模块、风扇驱动模块、角度测量模块、报警模块组成。角度传感器测量帆板的角度并反馈回单片机,通过增量式PID算法计算,并由PWM方法控制风扇的转速,从而实现精确控制风扇风力与帆板角度。     

一种用于图形设备接口的笔画模型方法

视频监控的在屏交互过程中,需要快速地对交互控件、感兴趣区域、活动标记等图形和图像进行绘制,为避免画面的停滞感,要求图形设备接口能快速进行绘制.为此,提出了一种笔画模型方法.利用 DirectX的原始绘制能力,该方法将绘制任务转换成笔画对象,使视频系统在实时运行过程中,只需将已转换的笔画对象的绘制数据提交给 DirectX 进行渲染和显示即可,降低重复绘制时间,满足系统的快速绘制要求.基于笔画模型方法,开发了一种可快速绘制的图形设备接口.     

基于J2EE的OA系统的设计与实现

随着我国电子政务建设的飞速发展,办公自动化软件在各级政府大量的推广应用,急需对现代化办公自动化系统进行深入研究。通过对J2EE架构的分析,提出了基于J2EE体系的办公自动化总体架构。以某市办公自动化系统的开发和实现为实例,分别阐述了各子系统的功能及设计方法。     

纯电动汽车太阳能辅助空调控制系统的硬件设计

纯电动汽车车载动力电池是其唯一的动力源且很有限,辅助设备消耗的电能减少了纯电动汽车的续驶里程,尤其是空调,所以开发高效的纯电动汽车空调系统是纯电动汽车能够被市场接受的关键。将纯电动汽车顶盖布满太阳电池,可以使空调系统的制冷能力增强,同时还能增加纯电动汽车的行驶距离。对小型纯电动汽车的太阳能辅助空调系统进行研究,设计出适合该空调的自动控制系统,可为纯电动汽车创造出一个更加舒适的驾驶和乘座环境。     

Directions for improving manual fire suppression using a physically based computer simulation

The Swedish Fire Research Board and the U.S. Federal Emergency Management Agency are sponsoring a project to further the understanding of the basic mechanisms involved, as well as to support the development of standards for and to seek ways of improving the performance of portable fire suppression systems used by fire departments.This paper describes a physically based computer model developed to simulate one aspect of the problem: the manual suppression of postflashover fires. This includes: (1) an overview of the physical basis behind the model; (2) a comparison of model predictions with available experimental data, and (3) an analysis of fire suppression effectiveness using the model.The analysis concludes that, when direct access and extinguishment of the burning fuel is not possible, improved fire control occurs with water sprays having a Rosin-Rammler distribution of droplet sizes with volume-median-drop diameters in the 0.15 to 0.35 mm range. This agrees with available experimental data. It is also shown that fire fighting venting and standoff distance requirements may lead to more severe fires requiring more water for control; although venting and water spray induced air/gas flow also serve to channel hot steam and gases away from the fire fighter adding to his safety. The analysis also shows that allowing higher gas and surface temperatures at fire control through improved fire fighter protective clothing and equipment design reduces water flow rate requirements. Additional experimental work is recommended before all these conclusions are considered definitive. Reference: L. M. Pietrzak and G. A. Johanson, Directions for Improving Manual Fire Suppression Using a Physically Based Computer Simulation,Fire Technology, Vol. 22, No. 3, August, 1986, p. 184.     

Isochoric specific heat of sulfur hexafluoride at the critical point: Laboratory results and outline of a spacelab experiment for the d1-mission in 1985

The specific heat at constant volume c_v shows a weak singularity at the critical point. Renormalization group techniques have been applied, predicting a universal critical behavior which has to be experimentally confirmed for different systems. In this paper an experiment is presented to measure the specific heat of SF₆ along the critical isochore (_c=0.737 g·cm^–3), applying a continuous heating method. The results cover a temperature span of –1.5×10^–2< <1.70×10^–2 [=(T–T _c)/T _c] and were strongly affected by gravity effects that emerge in the sample of 1-mm hydrostatic height near the critical point. Using regression analysis, data were fitted with functions of the form c _v/R=A × ¦¦^– + B for the one-phase state and c _v/R=A × ¦¦^– + B for the twophase state. Within their error bounds the critical values (==0.098, A/A=1.83) represent the measurements for the temperature span 3.5×10^{–5< ¦¦<2.0×10 –3}, in good agreement with theoretical predictions. In order to exclude density profiles in the specimen, which are unavoidable in terrestrial experiments due to the high compressibility of fluids at the critical point and the gravity force, a space-qualified scanning ratio calorimeter has been constructed, which will permit long-term c_v measurements under microgravity (-g) conditions. The experiment will be part of the German Spacelab mission in October 1985. The significant features of the apparatus are briefly sketched.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.