Determination of polymer–polymer interaction parameters using inverse gas chromatography

A modified method is discussed that is based on Farooque and Deshpande's method to obtain polymer–polymer interaction parameters using inverse gas chromatography (IGC) data. In the Farooque and Deshpande method, the ratio of the difference of probe–polymer interaction parameters between two polymers and the probe volume [(χ₁₂ ? χ₁₃)/V₁] is used as the abscissa. In the modified method, the ratio [(?₂χ₁₂ + ?₃χ₁₃)/V₁] is used as the abscissa. Experimental data previously reported for a poly(?‐caprolactone)‐polyepichlorohydrin (PCL/PECH) blend and a poly(ethyl acrylate)‐poly(vinyl propionate) (PEA/PVPr) blend are analyzed. It is found that the slopes obtained by the new method had smaller deviations from the theoretical values than the Farooque and Deshpande method. The standard deviations of both slopes and intercepts obtained from the new method are also smaller. Using the new method, the polymer–polymer interaction parameters obtained from the intercept are negative numbers for the PCL/PECH system and very small positive numbers for PEA/PVPr. Explanations are given for the probe and concentration dependency of the polymer–polymer interaction parameters that are generally observed in IGC studies. A new method for selecting the best probe for calculating the interaction parameter is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 671–680, 2003     

Surface structural change of ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V cathode materials at elevated temperatures

LiNi_0.5Mn_1.5O₄ powder was synthesized via sol-gel method and coated with ZnO in order to test the electrochemical cyclability of the material as a cathode for the secondary Li battery in the 5 V range at 55 °C. The ZnO-coated LiNi_0.5Mn_1.5O₄ powder nearly maintained its initial capacity of 137 mA h g⁻¹ after 50 cycles whereas the uncoated powder was able to retain no more than 10% of the initial capacity after 30 cycles. TEM analysis of the cycled cathodes suggests that the formation of the graphitic surface phase, hindering the Li migration, may be responsible for the rapid capacity loss of the uncoated material while no such phase was observed on the surface of the ZnO coated LiNi_0.5Mn_1.5O₄ powder.     

Electron transport in InGaO3(ZnO)m (m=integer) studied using single-crystalline thin films and transparent MISFETs

We have investigated the characteristics of transparent metal-insulator-semiconductor field-effect transistors (MISFETs) fabricated using InGaO₃(ZnO)_m (m=integer) single-crystalline thin films as n-channel layers and amorphous alumina as gate insulator films. The MISFETs exhibit good characteristics such as insensitivity to visible light illumination, off-current as low as ∼1 nA with a positive threshold voltage of ∼3 V and on/off current ratio of 10⁵. The field-effect mobility increased from ∼1 to ∼10 cm² (V s)⁻¹ as the m-value increased. Room temperature Hall mobility also increased. However, unexpectedly these values were lower than the field-effect mobility. It is explained by existence of shallow localized state in the homologous compounds.     

五轴铣削加工中心坐标转换数学模型的建立及应用

首先以 HERMLE C1200 U 为例分析了五轴铣削加工中心的基本结构,然后据此给出了涉及多轴铣削加工中心后置处理角度分配和坐标变换的数学模型,最后介绍了以此数学模型为核心,为UG 软件开发的后置处理软件 UG-HERP1.0的解决方案。     

稠油油藏的注汽量预测

利用HCZ预测模型，可对已开发油田的年产量和累计产量进行全程预测，并且在实际应用中取得了较好的预测结果。本文结合稠油田的实际情况，推导出HXZ预测模型在热采中注汽参数的预测公式。结合曙光油田曙1－7－5块的开发数据进行了预测，效果较好。     

Determination of tryptophan in feedstuffs: Comparison of two methods of hydrolysis prior to HPLC analysis

The tryptophan content of nine samples of commercial feed was determined using two procedures (I and II) differing mainly in the hydrolysis conditions used prior to analysis. With I, hydrolysis was performed with 4 M LiOH in the presence of maltodextrin with 5-methyltryptophan used as internal standard at 110°C for 24 h; with II. oxygen-free 1.3 M Ba(OH)₂ was used at 125°C for 16 h. The two procedures gave identical results for a given sample indicating that the corrections for the incomplete recovery of tryptophan 5-methyltryptophan quantitation were satisfactory.     

Influence of ZnO and P2O5 Content on Modified HZSM-5 on Aromatization of FCC Gasoline

Catalytic properties of different content of ZnO and P₂O₅ supported on HZSM-5 zeolites were studied in the conversion of FCC gasoline (75°C-120°C) into aromatic hydrocarbons with a temperature of 430°C, a liquid hourly space velocity of 1.0 hr^-1, and a pressure of 0.1 MPa. In the reaction, when the contents of ZnO and P₂O₅ are 2% and 4%, respectively, Zn-P/HZSM-5 showed the highest selectivity and activity to aromatic hydrocarbons and conversion of olefins. The content of aromatics in the liquid product and the yield of aromatics reached as high as 94.53%, 68.87%, and 51.74%, respectively.     

只读式超分辨光盘的膜层设计和分析

超分辨技术是一种无需减小记录波长或增大数值孔径而提高存储密度的方法。Ge Sb Te是一种良好的相变光存储材料 ,在超分辨光盘中可作为掩膜。利用多层膜反射率的矩阵法计算了掩膜为Ge2 Sb2 Te5薄膜的超分辨只读式光盘的光学参数与各膜层厚度之间的关系 ,最后得到了较为理想的膜层厚度匹配。采用磁控溅射法制备了只读式超分辨光盘 ,测量了光盘的光学性质。     

手套箱气氛中氚化水处理的工艺研究

分子筛吸附柱和热金属镁床是手套箱气氛中氚化水 (HTO)搜集和分解处理的一种有效手段。测试了分子筛柱对气氛中水的吸附性能和热金属镁床对HTO的分解性能。结果表明 :分子筛柱对气氛中水的吸附效率 >99 99% ,在空气中水含量为 3 4× 1 0 - 3～ 4 2× 1 0 - 3条件下 ,未发现吸附柱水的贯穿现象 ;热金属镁床对HTO的分解率 >99 9% ,当金属镁的消耗量大于 80 %时 ,未见分解率明显降低。     

一种便携式高精度数据采集系统的设计

介绍了微处理器MSC1210的功能和特点,对基于MSC1210的便携式高精度数据采集系统的硬件组成和软件设计进行了阐明,通过嵌入式GUI开发实现了液显人机交互功能。该系统具有速度快、处理能力强、可靠性高、功耗低等优点。