纯聚酯户外消光粉末涂料的制备

以高黏度、低酸值的含羧基饱和聚酯树脂为基料,以含有缩水甘油基的丙烯酸树脂为消光固化剂制备纯聚酯户外消光粉末涂料。介绍了该涂料的制备工艺,并讨论了原材料和生产条件对产品性能的影响。     

Combinatorial chemistry methods for coating development: VI. Correlation of high throughput screening methods with conventional measurement techniques

Combinatorial chemistry has proven to be a valuable tool for the development of new compounds. In the pharmaceutical industry, where combinatorial chemistry began, the approach has been instrumental in the high-speed development of new drugs. Due to the overwhelming success of the combinatorial methodology in the pharmaceutical industry, it has been recently applied to materials development. We have recently developed a combinatorial factory capable of preparing and evaluating on the order of 100 organic clear coatings in a day.

One of the most challenging aspects of the creation of the combinatorial factory was the development of the high throughput screening (HTS) methods for the primary coating properties of interest such as optical clarity, abrasion resistance, adhesion, and weatherability. For each property, an entirely new method was developed that allowed for rapid measurement of these properties on very small samples. This paper describes various aspects of the development of these novel measurement systems including the correlation of the HTS methods with conventional, industry standard measurement methods.     

如何降低涂料中增塑剂用量的试验研究

介绍了增塑剂的迁移性对涂层性能的影响,讨论了如何降低增塑剂的用量。     

水基含铝耐高温防腐蚀涂料

以水溶性的磷酸盐为主要成膜物质,铬酸(盐、酐等)为调节剂,球形铝粉为颜料合成了水基含铝耐高温防腐蚀涂料,该涂料具有优异的耐热、耐湿、耐盐雾、耐高低温冲击等性能。     

Protective properties of organic phosphate-pigmented coatings on phosphated steel substrates

Investigations have been carried out on properties of coatings, differing by their pigmentation and binder, and applied on different chemical pre-treatments of the steel surface. Paints based on alkyd and alkyd-melamine binders, pigmented with zinc phosphate and modified basic zinc phosphate were applied on amorphous and crystalline phosphated steel surface and, for the comparison purpose, on degreased steel surface. The effect of the binder, the pigment and the pre-treatment of the steel surface on the protective properties of the coatings were determined by measurements of adhesion, water absorption and water permeability and by results obtained in salt spray and Prohesion tests. Coatings based on alkyd binder show a lower damage degree and good retention of adhesion in corrosion conditions, in spite of a higher water absorption and water permeability and a lower initial adhesive strength. Protective properties of coatings have been found to be highly dependent upon the substrate pre-treatment. Chemical pre-treatment of the steel substrate increases the protective properties of the system, which is particularly evident in the case of crystalline phosphating and the coating pigmented with modified basic zinc phosphate. This phenomenon can be explained by the synergism between this phosphate pigment with crystalline phosphate layer.     

PP塑料底材处理剂的研制及应用

以氯化聚丙烯为主要原料,制备了一种环保型的聚丙烯塑料底材表面处理剂。讨论了树脂基料、溶剂、乳化剂的选取及配比等因素对涂层附着力的影响,确定了处理剂的最佳配方。经试验测试,聚丙烯塑料表面经处理剂处理后,其涂层的附着力显著提高。     

客车涂装工艺需注意的一些新问题

介绍了近期客车涂装中需注意的一些新情况和新问题,并提出了解决的思路和方法。     

抗静电粉末涂料的制备

简述了抗静电粉末涂料的制备机理及铝粉、氧化镁、二氧化钛和抗静电助剂添加量对涂料性能的影响，并简述其应用。     

Studies of microhardness and mar resistance using a scanning probe microscope

Scanning probe microscopy (SPM) is in a period of rapid development. It shows great promise for characterizing coating surfaces. This paper describes modification of an SPM so that it can be used to mar the surfaces of coatings under controlled conditions and to characterize the mars. Mar resistance of coatings is analyzed in terms of a ‘three response, two mechanism model.' The three responses (fracture, elastic, and plastic) can be measured quantitatively using the SPM. Of the three responses, only two (fracture and plastic deformation) are marring mechanisms – elastic deformations recover instantaneously. In some cases mars resulting from plastic deformation may recover slowly with time or with immersion in water; this phenomenon is attributed to viscoelastic creep. Microhardness is also measured with the modified SPM. Some thermoset coatings appear to be substantially harder near their surfaces than in the mass of material, and such materials may respond quite differently to stress applied at different levels near the surface. This finding has important implications for all coating properties that are strongly influenced by the surface. A quantity called ‘micro mar resistance' is defined. It may be useful for comparing different coatings under specified conditions of marring. However, there can be no single quantity that expresses ‘mar resistance' of a coating under all conditions.     

Preliminary evaluation of the anticorrosive properties of aircraft coatings by electrochemical methods

Strict regulations concerning the content of volatile organic compounds (VOCs) and heavy metals (Cr⁶⁺) in aircraft coating systems have increased the economic burden of the United States Air Force (USAF) in the area of coating maintenance. To this end, it is critical to have methods to characterize new coating systems in such a manner that the data can be used to predict accurately and reliably the expected lifetime of the coatings in service. Electrochemical noise method (ENM) and electrochemical impedance spectroscopy (EIS) are two techniques used to monitor extent and rate of corrosion. The USAF is currently employing these methods in order to supplement data acquired from traditional salt-spray methods. ENM and EIS are used to evaluate each component of the coating system and its contribution to corrosion prevention. Preliminary evaluations of an aircraft coating system on aluminum substrate (Al 2024-T3) produces resistance noise values of 10⁶ to 10⁷ Ω/cm². It is hoped that these results will form the basis of coatings that give increased USAF fleet service life and reduction in maintenance manpower and materials costs.