Numerical integration of singular integrands using low-discrepancy sequences

We investigate quasi-Monte Carlo integration for functions on thes-dimensional unit cube having point singularities. Error bounds are proved and the theoretical results are verified by computations using Halton, Sobol’ and Niederreiter sequences. Supported by the Austrian Science Foundation (Project 10223-PHY).     

基于C／S的CAD协同设计环境的产品数据管理技术

数据管理系统是ＣＡＤ协同设计环境核心系统之一。此文介绍了基于Ｃｌｉｅｎｔ／ＳｅｒｖｅｒｒＣＡＤ协同设计环境的数据管理关键技术，看重介绍了数据的模型结构和组织，数据库设计，版本管理，配置管理，数据安全性及一致性控制等内容。最后对系统实际应用效果进行了评价。     

IC卡处理系统及其实现

本文介绍了ＩＣ卡处理系统的基本组成，详述了一种ＩＣ卡处理系统的软硬件实现方法，说明了Ｉ＾２Ｃ总线在系统中的应用。     

基于LabVIEW的浑浊度数字化测试仪设计

本文将虚拟仪器技术与光频转换器件TSL230B相结合,设计新型浑浊度数字化测试仪.阐述该系统的工作原理、硬件构成及软件设计方案;实现浑浊度的自动在线测量.实验结果表明,该仪器数据处理能力强,图形化显示直观,保存与打印结果方便,测量的重复性好,精确度高.     

含硼微合金钢的静态及动态软化行为

运用gleeble-1500热模拟试验机November对含硼微合金钢进行了单、双道次压缩模拟,并通过非线性回归分析得到了静态与动态软化百分比(X)与变形温度(T)、变形程度(ε)、变形速率(ε·)、原始晶粒尺寸(d0)、道次间隔时间(t)之间的关系。     

高校MIS系统架构与安全实现

探讨了采用B/S网络结构模式的高校校园网MIS架构及其安全实现.     

ABB SPAC 315C馈线终端综合保护器

介绍了SPAC 315C馈线终端综合保护器在馈线端为6kV/0．4kV变压器线路中的实际运用，并阐述其主要功能和特点。     

Q345C低合金高强度结构钢板的试制

介绍采用氧气顶吹转炉→吹氩喂丝→板坯连铸→控制轧制生产Q345C低合金高强度结构钢板的生产工艺。通过对化学成分的合理设计及制订适合该厂冶炼、连铸、轧制的工艺，采取微合金化和控轧控冷相结合的有效技术措施，提高钢板的综合性能，特别是低温冲击韧性。生产的Q345C钢板，其产品质量完全符合GB／T1591—94标准要求。     

Growth and optical properties of Er,Yb:YAl3(BO3)4 crystal

Single crystal of erbium, ytterbium-codoped yttrium aluminum tetraborate Er,Yb:YAl₃(BO₃)₄(Er,Yb:YAB) has been grown by the flux method. The absorption spectrum in the visible and NIR regions of Er,Yb:YAl₃(BO₃)₄ crystal are measured at room temperature and fluorescence spectrum of Er,Yb:YAl₃(BO₃)₄ crystal are also measured at room temperature, excited by 976 nm laser. Not only the strong NIR emission peaks located at 1548 nm was observed, but also the visible up-conversion luminescence has been found. The specific heat of the Er/Yb:YAB crystal at room temperature is 0.81 J/g °C.     

Comparison of corrosion behavior of zirconium bombarded with self-ion and molybdenum ion

In order to study the effects of zirconium and molybdenum ion bombardment on the aqueous corrosion behavior of zirconium, one group of specimens was implanted with zirconium ions with ions surface densities ranging from 1 × 10¹⁵ to 2 × 10¹⁷ ions/cm² at about 170 °C, using a metal vapor vacuum arc (MEVVA) source operated at an extraction voltage of 50 kV. The other group of specimens was bombarded with molybdenum ion with ions surface densities ranging from 1 × 10¹⁶ to 5 × 10¹⁷ ions/cm² at about 160 °C, using a MEVVA source operated at an extraction voltage of 40 kV. The valence states and depth distribution of elements in the surface of the samples were analyzed by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES), respectively. Polarization curves measurement was employed to evaluate the aqueous corrosion resistance of the zirconium samples in a 1N H₂SO₄ solution. It was found that the aqueous corrosion resistance of zirconium implanted with 5 × 10¹⁶ Zr ions/cm² is the best in first group samples. For molybdenum ion implantation, the aqueous corrosion resistance of samples declined with raising ions surface densities. The natural corrosion potentials of zirconium samples bombarded with self-ions are more negative than that of the as-received zirconium. While, as for molybdenum ion implantation, the results are opposite. Finally, the mechanisms of the corrosion behavior of the zirconium samples implanted with zirconium and molybdenum ions are discussed.