Annealing effects on the optical and morphological properties of ZnO nanorods on AZO substrate by using aqueous solution method at low temperature

Vertically aligned ZnO nanorods (NRs) on aluminum-doped zinc oxide (AZO) substrates were fabricated by a single-step aqueous solution method at low temperature. In order to optimize optical quality, the effects of annealing on optical and structural properties were investigated by scanning electron microscopy, X-ray diffraction, photoluminescence (PL), and Raman spectroscopy. We found that the annealing temperature strongly affects both the near-band-edge (NBE) and visible (defect-related) emissions. The best characteristics have been obtained by employing annealing at 400°C in air for 2 h, bringing about a sharp and intense NBE emission. The defect-related recombinations were also suppressed effectively. However, the enhancement decreases with higher annealing temperature and prolonged annealing. PL study indicates that the NBE emission is dominated by radiative recombination associated with hydrogen donors. Thus, the enhancement of NBE is due to the activation of radiative recombinations associated with hydrogen donors. On the other hand, the reduction of visible emission is mainly attributed to the annihilation of OH groups. Our results provide insight to comprehend annealing effects and an effective way to improve optical properties of low-temperature-grown ZnO NRs for future facile device applications.     

Effects of pre-sintering and annealing on the optical transmittance of Zr-doped Y2O3 transparent ceramics fabricated by vacuum sintering conjugated with post-hot-isostatic pressing

In this work, Zr-doped Y₂O₃ transparent ceramics were fabricated by vacuum pre-sintering at various temperatures ranging from 1650 to 1800 °C combined with a post-hot-isostatic pressing (HIP) treatment. The pre-sintered samples all show black opaqueness mainly due to the formation of oxygen vacancies, which can be removed by post-annealing in air. The HIP treatment can also eliminate the blackness as well as residual pores, giving rise to optical transparency. The in-line transmittance of the samples after HIP was found to depend strongly on the microstructure of the as-sintered samples. The optimal microstructure of these types of samples before the HIP treatment should be fine grained with only intergranular pores, which can easily be removed by HIP. Annealing before HIP was shown to be necessary to enhance the transmittance of the samples. The effects of the pre-sintering heating rate on the optical transmittance of the HIP-treated samples were also studied.     

IA’s DCS顺序控制系统在除盐水站装置的应用

通过使用IA’s DCS顺序控制模块编程,实现除盐水站装置的主要装置的顺序控制。顺序模块使用IND（独立块）、TIM（定时块）等,通过利用IND支持编程高级语言的#define、#include等命令,在实施过程中大大提高编程效率,在调试期间减少调试实践,提高工作效率。     

Thermal annealing characteristics of solar selective absorber coatings based on nano-multilayered MoOx films

Designing double metal-dielectric (cermet) solar selective absorber coatings (SSACs) often requires complex co-sputtering techniques with multiple targets. This inevitably limits the simple and low-cost industrial fabrication. Here, we develop novel nano-multilayered MoO_x-based SSACs by simple and stable one-step reactive magnetron sputtering process using single molybdenum target. The proposed multilayer SSACs exhibit good solar absorptance of 0.93 and low thermal emittance of 0.06. Owing to the temperature-induced oxygen diffusion and oxidation phenomenon the as-sputtered SSACs have a poor thermal tolerance under air atmosphere, and after annealing at 200 °C for 150 h, the resulting absorptance is diminished from 0.93 to 0.90. However, the optical performance of the annealed SSAC is relatively stable in high-vacuum environment, even after annealing at 450 °C for 200 h, it still displays an ideal spectral selectivity of 0.92/0.07. With above properties, the resulting MoO_x-based SSAC is a promising absorber for enduring thermal harvesting in solar vacuum collectors.     

Effects of annealing on bandgap and surface plasmon resonance enhancement in Au/SnO2 quantum dots

Au/SnO₂ quantum dots (AuSQDs) were synthesized, and the effects of annealing on their structural and optical properties were examined. Significant changes were observed in the bandgap and surface plasmon resonance (SPR) of the AuSQDs after thermal treatment at different temperatures (400, 500, and 600 °C). The properties of the as-prepared and annealed samples were characterized via X-ray diffraction analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy, and diffuse reflectance spectroscopy. Annealing reduced the bandgap from 3.03 to 2.33 eV and increased the crystallinity while maintaining an average crystallite size below 10 nm. XPS valence band (VB) profiles provided information regarding the VB edge potentials, which helped to determine the conduction band edge potentials. An enhancement in the SPR of the Au nanoparticles was observed for AuSQD-500, which had the smallest bandgap among the samples investigated.     

Effects of the annealing atmosphere on the microstructure and properties of BiFe0.99Zn0.01O3 films

BiFe_0.99Zn_0.01O₃ (BFZO) films were annealed in different atmospheres (Air, N₂ and O₂) on ITO/glass substrates. The influences of the different annealing atmospheres on the oxygen vacancy concentration, microstructure, ferroelectric behavior, leakage current, leakage mechanism, aging and dielectric performance of the BFZO films were studied. The crystallization and grain development for the sample annealed in an O₂ atmosphere improved, and the concentrations of the Fe²⁺ and oxygen vacancies were the lowest among the samples studied herein. The BFZO film had the lowest leakage current density and the best ferroelectric performance in an O₂ annealing atmosphere among the samples studied herein, and the leakage was due to the F-N tunneling effect mechanism. From the perspective of the volume effect, the aging model was established, and the aging mechanism of the BFZO films was discussed in depth. Compared with Air and N₂, the annealed film in O₂ exhibited no obvious aging.     

不同工况下顺序输送混油的CFD模拟

应用FLUENT流体计算软件,以质量输运方程为基础,采用k-ε紊流模型,使用壁面函数法处理固壁边界,对顺序输送混油问题进行了数值模拟,分析了盲支管、90°弯管以及变径管等工况对混油的影响,研究结果为进一步研究成品油的顺序输送工艺设计提供了理论依据和指导,并可促进FLU-ENT软件在顺序输送模拟中的开发及应用。     

Effects of annealing temperature on the photocatalytic activity of N-doped TiO2 thin films

The effects of annealing temperature on the photocatalytic activity of nitrogen-doped (N-doped) titanium oxide (TiO₂) thin films deposited on soda-lime-silica slide glass by radio frequency (RF) magnetron sputtering have been studied. Glancing incident X-ray diffraction (GIAXRD), Raman spectrum, scanning electron microscopy (SEM), atomic force microscopy (AFM) and UV-vis spectra were utilized to characterize the N-doped TiO₂ thin films with and without annealing treatment. GIAXRD and Raman results show as-deposited N-doped TiO₂ thin films to be nearly amorphous and that the rutile and anatase phases coexisted when the N-doped TiO₂ thin films were annealed at 623 and 823 K for 1 h, respectively. SEM microstructure shows uniformly close packed and nearly round particles with a size of about 10 nm which are on the slide glass surface for TiO₂ thin films annealed at 623 K for 1 h. AFM image shows the lowest surface roughness for the N-doped TiO₂ thin films annealed at 623 K for 1 h. The N-doped TiO₂ thin films annealed at 623 K for 1 h exhibit the best photocatalytic activity, with a rate constant (k_a) of about 0.0034 h⁻¹.     

Effect of annealing on the structure and magnetic properties of CoFe2O4:SiO2 nanocomposites

The decomposition of succinate type precursors obtained by a modified sol-gel method using cobalt and iron nitrates, 1,4-butanediol and tetraethylorthosilicate, followed by the formation of single phase cobalt ferrite embedded in the silica matrix by annealing at 400–1100 °C was studied. The thermal analysis indicated the formation temperature of succinate type precursors, while the Fourier transform infrared spectroscopy (FT-IR) data confirmed the formation of the precursors in the pores of silica matrix. The formation of CoFe₂O₄ was investigated by X-ray diffraction and FT-IR, the size and shape of the nanoparticles by transmission electron microscopy, while the resulted microstructures by scanning electron microscopy. The crystallinity and crystallites size increased with the annealing temperature. The hysteresis loops revealed a direct relationship between annealing temperature and saturation magnetization in constant coercive field. The particle size of ferrite powders is critically dependent on the annealing temperature.     

Capacitive and textural characteristics of hydrous manganese oxide prepared by anodic deposition

The amorphous hydrous manganese oxide (denoted as a-MnO_x·nH₂O) was anodically deposited from the MnSO₄ solutions of various pH values. The capacitive characteristics and stability of this oxide without and with annealing in air for 2 h up to 400 °C were systematically investigated in aqueous electrolytes through means of cyclic voltammetry (CV) and the constant-current charge-discharge method. The redox properties of a-MnO_x·nH₂O were strongly affected by the electrolytes employed and this oxide exhibited ideally capacitive behavior in 0.1 M Na₂SO₄ and 0.3 M KCl. The stability of this amorphous hydrous oxide was enhanced by the annealing treatment while its capacitance was gradually decreased with increasing the annealing temperature. The amorphous structure and surface morphologies of a-MnO_x·nH₂O with annealing at different temperatures were, respectively, examined in terms of the X-ray diffraction (XRD) patterns and scanning electron microscopic (SEM) photographs. The oxidation states of these a-MnO_x·nH₂O deposits were studied by X-ray photoelectron spectroscopy (XPS).