氧化锆增韧陶瓷的相变及相变增韧

本文阐述了氧化锆增韧陶瓷（ＺＴＣ）的相变增韧机理，并探讨了热处理工艺对ＺＴＣ的相变及显微组织的影响规律。     

Coupling techniques in boundary-combined methods for solving elliptic problems with singularities

Three coupling strategies in matching the Ritz-Galerkin method and the finite element method are introduced for general elliptic equations, and useful numerical techniques are provided. Numerical experiments have been carried out for solving the typical, singular Motz problem, which shows that optimal convergence rates of numerical solutions can be achieved by using the combined methods and techniques provided in this paper.     

Analysis of a conjugated infinite element method for acoustic scattering

This work is devoted to a study of a conjugated infinite element method for Helmholtz problems in exterior domains. A formulation of this method with Lagrange multipliers defined on (semi-)infinite space is presented and analyzed in a domain decomposition context. The implementation aspects of this method in a parallel industrial acoustic software (SYSNOISE) are described in details. Numerical results show the computational efficiency of this method on acoustic scattering problems.     

A Jensen type inequality for fuzzy integrals

In this paper, we show a Jensen type inequality for the Sugeno integral. We also discuss some conditions assuring the satisfaction of opposite inequality (reverse Jensen inequality).     

南水北调中线干线工程数字文档管理信息系统设计与实现

结合南水北调中线干线工程文档一体化管理的需要，设计了数字文档管理信息系统的功能结构，包括文书管理、数字文件中心和数字档案馆3个部分，通过对文档资料的综合管理，能够极大提高文档信息的利用率和现代化管理程度。     

Influence of thermal boundary conditions on natural convection in a square enclosure partially heated from below

Natural convection in air-filled 2D square enclosure heated with a constant source from below and cooled from above is studied numerically for a variety of thermal boundary conditions at the top and sidewalls. Simulations are performed for two kinds of lengths of the heated source, i.e., a small and a large source corresponding to 20% and 80% of the total length of the bottom wall, respectively. The Rayleigh number varied from 10³ to 10⁷. Results are presented in the form of streamline and isotherm plots as well as the variation of the Nusselt number and maximum temperature at the heat source surface. Comparisons among the different thermal configurations considered are reported.     

Three-Dimensional Solution and Experimental Confirmation for the Electric Resistivity Testing of Surface-Breaking Defects in Green-State Powder Metallurgy Compacts

This paper investigates electrostatic voltage distributions around a surface-breaking flaw due to an injected current of known strength. The direct 3-D solution of the voltage behavior over the flawed surface is obtained numerically by the use of a boundary integral formulation. A novel iteration method is applied to solve the resulting electrostatic integral equation for the unknown surface voltage distribution. In addition to investigating the sensitivity of different flaw sizes to the observed surface voltage distribution, important issues such as suitable probe spacing and current flow orientation are studied. For sufficiently small surface-breaking flaws, a simple image source model is developed to evaluate the voltage response of hairline cracks. The model is tested by comparing it with the developed numerical solution. Experiments aimed at establishing the validity of the modeling approach show remarkable agreement with the theoretical model.     

基于融合技术的新一代联络中心的研究与设计

随着通信和信息技术的跨越式发展,传统呼叫中心已经难以满足企业快速增长的需求,同时以客户为中心和以服务为导向的经营理念对新一代联络中心提出了更高的要求。在联络中心技术快速革新的背景下,文中以软交换、NGN和分布式技术为基础,深入研究了基于融合技术的新一代联络中心的系统架构和软交换平台的逻辑关系,构建了支持全媒体业务和标准化SIP的统一通信平台。文章以联络中心中实时和非实时业务为例,分析设计了适合联络中心典型的话务和多媒体业务的信令流程,提出了适应新一代联络中心的业务部署方式,利用模糊综合评价方法对不同部署方式的特点进行对比评估,为新一代联络中心在大型企业中推广和应用提供重要的理论和实践依据。     

积分分离PID算法的电阻炉温度控制系统

为使大惯性、纯滞后的电阻炉温度控制系统的动态性能和稳态精度满足要求,提出了Smith预估结合积分分离PID算法;设计了温度控制器的硬件系统;对控制系统进行辨识;分析了Smith预估结合积分分离PID算法与单纯Smith预估控制算法的区别,并对两种控制算法进行了比较分析,确定了电阻炉温度控制系统参数;最后对Smith预估结合积分分离PID算法进行了电阻炉的温度控制实验;实验结果表明,采用Smith预估结合积分分离PID算法提高了电阻炉温度控制系统的稳定性,降低了系统的超调,稳态精度达到0.2℃,其动态性能和稳态精度满足系统控制要求.     

gain bounds for systems with sector bounded and slope‐restricted nonlinearities

This paper proposes a new method for calculating a bound on the gain of a system comprising a linear time invariant part and a static nonlinear part, which is odd, bounded, zero at zero and has a restriction on its slope. The nonlinear part is also assumed to be sector bounded, with the sector bound being (possibly) different from that implied by the slope restriction. The computation of the gain bound is found by solving a set of linear matrix inequalities, which arise from an integral quadratic constraint formulation of a multiplier problem involving both Zames‐Falb and Popov multipliers. Examples illustrate the effectiveness of the results, and comparisons are made against the state‐of‐the‐art. Copyright © 2011 John Wiley & Sons, Ltd.