易门铜业公司18kt／a粗铜及硫酸车间的技改工程

介绍了易门铜冶炼厂烟气制酸系统的技术改造工程.从工艺流程、设备复核、工艺参数、设备配置等方面阐述了技改的过程.     

Evolution of patinas on copper exposed in a suburban area

Copper plates were exposed under sheltered outdoor conditions for up to one year, starting in September 2001 in Musashino City, Tokyo, a suburban area. Following various periods of exposure, the patinas on the plates were characterized to investigate their evolution by using X-ray fluorescence analysis, X-ray diffraction, field emission scanning electron microscopy, and glow discharge optical emission spectroscopy. The difference in the roles of sulfur and chlorine in the early stages of copper patination were identified by analyzing the depth profiles of these two elements. Sulfur was found on top of the patina as cupric sulfates such as posnjakite (Cu₄SO₄(OH)₆ · H₂O) or brochantite (Cu₄SO₄(OH)₆). Brochantite appeared only after 12 months of exposure. In contrast, chlorine was found on the surface after only one month of exposure. It gradually penetrated the patina as the exposure period lengthened, forming copper chloride complexes. Chloride ions accumulated at the patina/copper interface, forming nantokite (CuCl), which promoted corrosion.     

A new Cu–Hf–Al ternary bulk metallic glass with high glass forming ability and ductility

We have discovered a new Cu-based bulk metallic glass (BMG). Although of a simple Cu₄₉Hf₄₂Al₉ ternary composition, the as-cast alloy is a monolithic, uniform BMG with a critical diameter as large as 10 mm. The width of the supercooled liquid region ΔT_x and the reduced glass transition temperature T_rg for this glass are 85 K and 0.62, respectively. In addition to its high glass-forming ability and high density of 11 g/cc, this BMG exhibits high ductility with a compressive plastic strain of 11–13%, making it a good candidate for applications as well as for studies of deformation behavior of Cu-based BMGs.     

Differences between corrosion products formed on copper exposed in Tokyo in summer and winter

We analyzed the copper corrosion products that formed during a month in summer and a month in winter at three sites in Tokyo using several analytical techniques. The X-ray diffraction patterns revealed that cuprite Cu₂O and posnjakite Cu₄SO₄(OH)₆·H₂O formed on copper exposed in summer. By contrast, only cuprite was found in winter exposed copper. The X-ray fluorescence results indicated that the amounts of sulfur and chlorine on the copper plates exposed in summer were much greater than those in winter. This could be explained by the change in particulate sulfate and sea salt concentrations. Depth profiling analysis by Auger electron spectroscopy revealed that the oxide layer formed in summer was thicker than that in winter. This difference in oxide layer thickness could have been due to the differences in temperature, relative humidity, and the amount of sulfur and chlorine on the copper plate.     

应用统计学实验方法优化铜常温发黑剂配方

运用统计学试验设计方法研究了不同的因素对铜常温发黑剂体系的性能影响.通过试验结果的统计分析,揭示了这些因素对体系的多种显著影响.更为重要的是本研究发现了多种因素间的双因素交互作用.而且这些交互作用的影响很难被传统的单因素试验发现.本研究结果可用于设计高性能的铜常温发黑剂.     

装饰用梅花形黄铜管拉伸成型工艺研究

通过对梅花形黄铜管一次拉伸成型的实验 ,研究了管坯的规格、管坯的状态、延伸系数、拉伸方式、工艺润滑及拉伸速度等工艺因素对梅花黄铜管凸筋高度充填的影响规律 ,这些结论对实际生产有一定的指导意义。     

Corrosion protection of iron by polypyrrole modified by copper using the cementation process

Polypyrrole (PPy) coatings have been deposited on iron from aqueous oxalic acid solution at different current densities. The polymer deposit obtained at a current density of 2 mA cm⁻² yields strongly adherent and smooth PPy layers. The modification of the film by incorporation of copper microparticles using the cementation process was applied. The resulting PPy/Cu film electrodes were characterized by scanning electron microscopy and EDX analysis. The protective performance against corrosion of these films is evaluated by using open circuit potential monitoring in highly corrosive solution (3% NaCl + HCl, pH 1). The results obtained were promising in the protection against corrosion.     

TiB2/Cu复合材料用于电火花加工电极的可行性探讨

从分析电火花加工对电极材料的基本要求入手，结合TiB2／Cu复合材料在目前制备工艺条件下所获得的电学、力学性能等特性，采用对比研究的方法，探讨将其作为电火花加工电极材料的可行性。     

铜—硬铝（LY12）复合板的爆炸焊接与轧制

研究了铜(T2)—硬铝(LY12)复合板的爆炸焊接,轧制和退火工艺,提供了不同状态下,复合板的成分、组织和性能的检验资料。这些资料为这种爆炸复合材料的实际应用提供了依据。