Modeling the dynamic properties of fibre-reinforced concrete with different coating technologies of multifilament yarns

The dynamic behaviour of fibre-reinforced, cementitious composite materials is gaining increasing interest. With respect to service life dynamic loading just under the elastic limit of the material at hand is relevant to practical applications, for the resulting (stress-)waves may be focused within regions of the heterogeneous composite material. This local overstraining of the material may lead to deterioration of the structural element. In this contribution, the effect of the set-up of the reinforcing fibres on the wave scattering behaviour is investigated. Special attention is paid to layered centric configurations of these fibres, as it occurs e. g. within textile-reinforced concrete (TRC). A mechanical model is developed and solved analytically providing an efficient and robust method to describe the dynamic behaviour of given fibre configurations. This method is needed for materials which have to be described mechanically before the manufacturing process – as it is the case for TRC. The proposed model also allows for planning experiments and thus is of additional value. It is shown that the inner structure of the fibres does influence the amplitude response spectra and consequently the proposed method also may be used for non-destructively detecting the inner structure of the multifilament yarns and other related objects.     

Anomalous creep behaviour of 316 stainless steel at 550°C

The results offifteen constant-load creep tests at 550°C, with nominal stresses in the range 200 to 360 MPa and with test durations ofup to 14 000 h, are presented. The usual primary, secondary and tertiary creep behaviour was exhibited for nominal stresses greater than about 330 MPa. At lower stresses, ‘renewed’ primary and secondary creep regions were observed. The renewed secondary creep strain rates were found to be about an order of magnitude greater than the initial secondary creep strain rates. The results indicate that the occurrence ofthe renewed primary and secondary creep regions is associated with time-dependent exposure to a temperature of 550°C. The presence or magnitude of the prior stress level does not appear to have any significant effect.

The results are relevant to design procedures because extrapolation of short duration or high stress data to long-term design lifetimes is often required. Unless the possibility ofthe occurrence ofrenewed primary and secondary creep is taken into account, gross errors in strain predictions could occur.     

Automobile-Speed Estimation Using Movie-film Simulation

A silent movie film made by shooting through the windscreen of a car driven at different constant speeds was shown in an auditorium, and subjects asked to estimate the speed of the car. Of the 70 subjects who participated, 35 sat at the front and the remainder at the back.

The speed estimates of those seated at the back were, on average, some 11 per cent higher than those at the front. An explanation for this effect is given. It is shown that those at the correct perspective distance from the screen ( in the present case, those at the front) will receive an impression of speed which most closely resembles the actual speed of the car.

The speed estimates from the front of the auditorium most closely resembled those observed in an earlier field experiment when the subjects' hearing was diminished. It is concluded that the movie technique provides a good simulation of the task in the field experiment if the following two qualifications are made. First, the movie must be viewed from close to the correct perspective distance. Second, a silent movie corresponds to the real situation in which the observer is prevented from hearing.     

Influence of chromium diffusion and different surface finishes on the oxidation behaviour of chromium steels

Abstract

The present contribution is focused on the systematic investigation of the effects of different surface finishes (ground, polished, electropolished) on the oxidation behaviour of chromium steels. The specimens were oxidized in a H2–2.5%H₂O atmosphere at 872 K for 1 h to 100 h. Depth profiles were recorded by secondary neutral mass spectrometry (SNMS) to determine the elemental composition of the oxide scale and the diffusion profiles below the scale. The surface finish was found to influence both the thickness of the oxide scale and the depletion of the selectively oxidized elements.     

On a driven nonlinear circuit and chaotic behaviour

Abstract

The chaotic behaviour of the sinusoidally driven nonlinear circuit proposed by Hunt is investigated. The results are compared with those from other driven nonlinear circuits.     

Comprehension and acceptability of on-board traffic information: Beliefs and driving behaviour

Co-Drive on-board traffic information system is a complementary tool providing a dynamic management of transportation infrastructure and traffic as well as the diffusion of accurate real-time information about the road environment and motorists’ driving behaviour. The aim of this study was to examine drivers’ acceptability of Co-Drive by investigating the impact of traffic information provided via on-board display devices on motorists’ beliefs and behaviour.     

Analysis of factors influencing acceptance of personal,academic and professional development e-portfolios.

This research investigates factors that influence students’ intentions to use personal, academic and professional development portfolios using a theoretical model based on the Decomposed Theory of Planned Behaviour (DTPB). Electronic portfolios (e-portfolios) are important pedagogical tools and a substantial amount of literature supports their role in personal, academic and professional development. However, achieving students’ acceptance of e-portfolios is still a challenge for higher education institutions. The model suggests that Attitude towards Behaviour (AB), Subjective Norms (SN) and Perceived Behavioural Control (PBC) and their decomposed belief structure can assist in predicting and explaining students’ Behavioural Intention (BI) to use e-portfolios. After using e-portfolios, data was collected from 204 participants from a UK university and analysed through the Structural Equation Modelling (SEM) technique. The results demonstrated that the proposed personal, social and control factors in the model were well supported statistically and significantly influenced e-portfolio acceptance. The study provides for the first time a proven theoretical model which can be used to predict e-portfolio acceptance. The findings are valuable for system developers, educational developers and higher education institutions where e-portfolios are being used.     

Distinguishing between green building occupants’ reasoned and unplanned behaviours

Several frameworks incorporate social and psychological elements of environmentally significant behaviour, and most assume cognitive and deliberate decision-making. Household energy consumption behaviours, however, span a spectrum from reasoned and deliberate to unplanned and automatic. The aim of this paper is to advance knowledge of reasoned and unplanned behaviours in the context of pro-environmental action. Using results of a survey administered to occupants of an urban residential green building, this study explores five household consumption behaviours and tests the hypothesis that unplanned behaviours will be poorly predicted by a reasoned, values-based behavioural framework. Using path analyses, variables in a values-based framework are used to predict surveyed behaviours. Findings indicate that behaviours hypothesized to be unplanned were not well predicted by the values-based framework. The framework successfully predicted what was hypothesized to be a fully reasoned behaviour. Three potential reasons are discussed for the lack of prediction of some behaviours. A deeper understanding of how unplanned, automatic or habitual behaviours intervene in conservation intentions can help policy-makers and building designers better respond to influences of occupant behaviour on building performance.     

Conflict-resolving behaviour of project managers in international projects: A culture-based comparative study

The cultural issue is obtaining more and more consideration in international project management and the risky nature of international projects reinforces this consideration. Conflict-resolving behaviour is one of the cultural behaviours that can affect project success. This paper addresses comparative research between Chinese and South African project managers in their conflict-resolving behaviour, as regards certain project activities relating to international projects. The results show that the differences between the conflict-resolving behaviours of the two groups are significant, in terms of project communication, negotiation and conflict-resolution activities. This research will fill a gap in the cross-cultural conflict resolving behaviour comparison study of the international project management arena. The results and suggestions should assist practitioners and researchers involved in international R&D and technologic project management to improve their skills in communication, collaboration and staff training.     

Contribution of green labels in electricity retail markets to fostering renewable energy

In European countries, retailers are obliged to disclose the energy source and the related environmental impacts of their portfolio over the preceding year. The electricity supplied in the Dutch retail market is presented as renewable energy for 34%, but this relatively high share is for 69% based on certificates (Guarantees of Origin) which are imported from in particular Norway. The certificates are used to sell green electricity to consumers. The premium for green electricity which is actually paid by Dutch consumers is no more than a few percentages of the retail price. The low level of this premium is related to the abundant supply of certificates at low marginal costs from Norway. This also means that the premium for green electricity is too low to give an incentive for investments in new capacity. Hence, the current labelling system for renewable electricity is mainly valuable, besides being an instrument for tracking and tracing of renewable energy, as a marketing instrument for electricity retailers. The effectiveness of Guarantees of Origin as a policy instrument to foster renewable electricity sources is weak. This effectiveness can be raised by implementing restrictions on the international trade or the issuance of new certificates.