串联谐振耐压试验仪的设计与仿真

针对XLPE电力电缆耐压测试成本高、操作复杂等问题,本文中设计了一种变频串联谐振耐压试验装置。利用串联谐振电路的升压原理,构建了硬件电路,通过仿真对选择谐振点等问题进行了探讨。为了改进普通串联谐振耐压测试装置寻找谐振点慢、精度低的缺点,提出了一种解决方案。仿真结果表明,该方法能精确地确定谐振点。装置输出波形可靠性好,谐波分量少,具有良好的性能。     

单周期控制Boost—PFC基于Saber的设计与仿真

单周期控制策略简单可靠,动态响应速度快,能很好地抑制输入电压扰动和负载突变。本文阐述了单周期控制Boost—PFC的工作原理,对单周期控制Boost—PFC进行了基于Saber软件的CAD设计和仿真。仿真结果表明,单周期控制适用干Boost变换器,能够实现功率因数校正。     

PTN网络的二次断纤链路规划算法

在PTN（PacketTransportNetwork）网络规划建设中,需要对光纤链路留出备份带宽,以保证部分光纤断开时,受影响业务有足够的容量进行路由重组。这也是提高网络生存性的有效方法之一。文中首先遍历网络双链路的失效状态,然后断开网络中任意两条链路,通过逐次增加链路容量来保证失效业务能够重组路由;最后提出二次断纤链路容量规划算法并进行试验仿真。结果表明,该算法在节约网络带宽、降低建造成本以及故障容错方面有着良好性能,能够很好应用于传送网络的链路规划中。     

基于统计阈值的Snort规则集动态产生的设计与实现

Snort作为开源的入侵检测系统,利用定义的静态规则集合实现对网络的入侵事件的检测。本文分析入侵检测系统的基本原理和模型,阐述Snort入侵检测系统部署到网络时,其静态规则集的配置方法,根据统计流量阈值和告警频率阈值动态产生动态规则集的方法,改进并提高了部署Snort应有的灵活性。     

基于DMT的1553B带宽扩展研究

由于传统的MIL-STD-1553B总线难以满足高速数据传输需求且更换现有总线代价过高,因此迫切需要在不影响现有基带通信的条件下升级1553B系统以提供高速通信接口。本文分析1553B的信道特性并据此选择频谱利用率高、抗频率选择性衰落的离散多音调制(DMT)作为扩展带宽的技术,基于离散多音调制,提出一个与现有通信相互兼容的扩展方案以显著提高传输速率,并对该方案涉及的关键技术进行介绍。     

考虑多样化需求的诊疗设备维护和患者调度联合优化研究

针对诊疗设备维护和住院患者候诊难以有效协调的问题,建立了联合优化模型。首先,假设设备具有离散的劣化状态,将设备的劣化过程建模为连续时间马尔可夫链;其次,考虑到患者对诊疗设备的不同功能频率需求,以及不同劣化状态对患者治疗时间、费用的影响,以患者就诊顺序、检查策略、修复策略为决策变量建立了设备维护和患者调度模型;最后,采用改进后的非支配排序遗传算法对多目标问题进行了求解。实验结果验证了设备维护与患者调度联合优化模型的有效性。改进后的算法提高了整体和局部的搜索能力,且具有鲁棒性。     

Mathematical model and discrete artificial Bee Colony algorithm for distributed integrated process planning and scheduling

With the development of the globalization of economy and manufacturing industry, distributed manufacturing mode has become a hot topic in current production research. In the context of distributed manufacturing, one job has different process routes in different workshops because of heterogeneous manufacturing resources and manufacturing environments in each factory. Considering the heterogeneous process planning problems and shop scheduling problems simultaneously can take advantage of the characteristics of distributed factories to finish the processing task well. Thus, a novel network-based mixed-integer linear programming (MILP) model is established for distributed integrated process planning and scheduling problem (DIPPS). The paper designs a new encoding method based on the process network and its OR-nodes, and then proposes a discrete artificial bee colony algorithm (DABC) to solve the DIPPS problem. The proposed DABC can guarantee the feasibility of individuals via specially-designed mapping and switching operations, so that the process precedence constraints contained by the network graph can be satisfied in the entire procedure of the DABC algorithm. Finally, the proposed MILP model is verified and the proposed DABC is tested through some open benchmarks. By comparing with other powerful reported algorithms and obtaining new better solutions, the experiment results prove the effectiveness of the proposed model and DABC algorithm successfully.     

Decision-based process planning for wire and arc additively manufactured and machined parts

The conventional manufacturing of aircraft components is based on the machining from bulk material and the buy-to-fly ratio is high. This, in combination with the often low machinability of the materials in use, leads to high manufacturing costs. To reduce the production costs for these components, a process chain was developed, which consists of an additive manufacturing process and a machining process. To fully utilize the process chain’s capabilities, an integrated process planning approach is necessary. As a result, the work sequence can be optimized to achieve the economically most suitable sequence. In this paper, a method for a joint manufacturing cost calculation and subsequent decision-based cost minimization is proposed for the wire and arc additive manufacturing (WAAM) & milling process chain. Furthermore, the parameters’ influence on the results and the magnitude of their influence are determined. These results make it possible to design an economically optimal work sequence and to automate the process planning for this process chain.     

数字证书在环保行业的应用分析

目前国家环保部正在开展的国家环境信息与统计能力建设项目中,采用数字证书为业务系统提供强身份认证服务。详细论述了数字证书在环保部的应用模式,指出了今后的工作方向,同时也指出了现有应用模式的不足之处。     

Heuristic collision-free path planning for an autonomous platform

In this paper, a heuristic and learning, algorithmic scheme for collision-free navigation is presented. This scheme determines an optimum collision-free navigation path of an autonomous platform by using a trial and error process, past navigation knowledge and current information extracted from the generated surrounding environment.