Stability of AB5-type hydrogen storage alloys

In this paper, we deduced an empirical equation for predicting the stabilities of the hydrides of AB₅-type compounds with the consideration of the effects of geometrical factor and electric factor. The theoretical curves derived from this equation are in good agreement with the test results of La_1−xCa_xNi₅, Ml_1−xCa_xNi₅ and La_1−xCe_xNi₅ compounds. With this model, we can easily interpret the phenomenon that the initial partial substitution of R by Ca in R_1−xCa_xNi₅ (R is rare earth metal) compounds cause an increase of hydrogen desorption pressure to a maximum value, whereas in the range of larger Ca content x the hydrogen desorption pressure decreases with increasing x.     

Strengthening technology and mechanism for semi-solid die casting of aluminum alloy

Combined with theoretical evaluation,an optimized strengthening process for the semi-solid die castings of A356 aluminum alloy was obtained by studying the mechanical properties of castings solution treated and aged under different conditions in detail,then,the semi-solid die castings and liquid die castings were heat treated with the optimized process.The results show that the mechanical properties of semi-solid die castings of aluminum alloy are superior to those of the liquid die castings,especially the strengthening degree of heat treated semi-solid die castingsis much greater than that of liquid die castings with the tensile strength more than 330 MPa and the elongation more than 10％,and this is mainly contributed to the non-dendritic and more compact microstructure of semi-solid die castings.The strengthening mechanism of heat treatment for the semi-solid die castings of A356 aluminum alloy is due to the dispersive precipitation of the second phase(Mg2 Si) and formation of GP Zone.     

PC/ABS合金研究进展

概述了PC/ABS合金国内外的开发应用现状,并综述了国内外近年来对PC/ABS合金的研究进展,其中包括:PC/ABS合金的相容性技术、相容剂的选用及影响合金性能的因素:原料、组分的配比、成型条件等,并对该合金的发展方向作了简要的分析,认为PC/ABS合金的开发研究在国内塑料合金的工业开发、应用中极其重要,开发的核心是相容化技术。     

羟基烷基磺酸镀液电镀Sn—Pb合金的研究

我国自行研制生产的羟基烷基磺酸电镀Sn-Pb合金镀液已经在部分厂家投产使用.生产实践证明,该镀液能获得不同铅含量的、可焊性优良且镀层结晶细致而光亮的Sn-Pb合金镀层.本研究重点测定了该镀液的电化学性能,如阴极电流效率、分散能力及深镀能力.并对添加剂的作用进行了研究探讨.     

1991—1992国外工程塑料进展

介绍了1991～1992年国外工程塑料研究和生产概况。论述了通用工程塑料、特种工程塑料和聚合物合金的研究开发、改性和应用方面的进展。且指出工程塑料发展趋势和特点;对复合材料技术进展作了较详尽的分析与阐述。     

低熔点合金填充聚合物材料断口形貌研究

研究了合金元素、加工温度、金属含量、第三组分对低熔点金属填充聚合物材料断口形貌的影响。实验结果表明:不同的合金对体系的影响很大,低分子量、低结晶性聚合物,高的成型加工温度可提高材料的相容性。     

马来酸酐接枝聚丙烯的进展

马来酸酐接枝聚丙烯是拓宽聚丙烯应用领域的重要手段之一,本文综述了马来酸酐接枝聚丙烯的接枝方法和原理,接枝物的性能以及接枝物在聚丙烯合金和共混物、复合材料、粘合剂和涂料领域的广泛应用。     

基于形状记忆合金的TMD半主动控制

针对建筑结构在随机荷载或风荷载作用下可能发生的频率不确定问题,特别是结构自振频率会随振幅的大小而发生漂移的非线性振动问题,提出性能可靠、构造简单的形状记忆合金SMA-TMD自适应半主动控制系统.从理论上探讨形状记忆合金在变刚度TMD控制装置中的应用,并进行相应的参数设计.同时,在研究随机荷载作用下TMD系统动力特性的基础上,结合短时傅里叶变换(STFT)设计出该系统的自适应半主动控制算法.算例表明,SMA-TMD自适应控制系统能较好地识别结构系统的时频特性,并进行有效的控制,具有性能可靠和自适应能力强等特点.该自适应控制系统较传统的TMD被动控制减震效果更好,鲁棒性更强.     

Corner forming of AZ61A magnesium alloy tube within warm hydroforming

The corners with small radii on cross sections are crucial for forming hydroformed components with polygonal sections.In this paper,warm hydroforming experiments of AZ61A magnesium alloy tubes were carried out to study the forming regularity of round corners by using a demonstration part with square sections.Effects of temperature on radius forming,thinning ratio distribution and microstructure were revealed and a component with relative outer corner radius of 3.0 was obtained by warm hydroforming at 240℃.The minimum thickness of the formed square section was located in the transition position between the corner and the straight wall.The thinning ratio of the round corner increased with the increase of forming temperature.Formability of the magnesium tube was improved by raising temperature under the effect of dynamic recrystallization at 240℃.     

Computation of concentrations of characteristic atoms of alloys in BCC structure

In this paper,taking Nb-Mo alloy system as an example,the equations of concentration of characteristic atoms of alloys in BCC structure were obtained on the basis of the idea of systematic science of alloys and the number of coordination atoms.The concentrations of characteristic atoms in B2-NbMo type ordered alloys were calculated as functions of ordering degree(s) and composition xMo.When s=smax,the concentrations of characteristic atoms of stoichiometric B2-NbMo intermetallic compound are equal to that o...