Corrosion inhibition of stainless steel by polyaniline,poly(2-chloroaniline), and poly(aniline-co-2-chloroaniline) in HCl

Polyaniline (PANi), poly(2-chloroaniline) (PClANi), and poly(aniline-co-2-chloroaniline) (co-PClANi) films were synthesized by electrochemical deposition on 304-stainless steel (SS) from an acetonitrile solution. The structural properties of these polymer films were characterized by spectroscopic (FTIR and UV–vis) and electrochemical (cyclic voltammetry) methods. Open circuit potential–time (E_ocp–time) curves, potentiodynamic polarization, and electrochemical impedance (EIS) measurements showed that these films have significant protective performance against corrosion of SS in 0.5 M HCl solution. It was found that co-PClANi film has acted as a passivator as well as barrier for cathodic reduction reaction in a similar manner as PANi film. However, PClANi film has behaved only as barrier for corrosion protection of SS in 0.5 M HCl.     

不锈钢冶炼用不烧镁钙砖的研制及应用

介绍了冶炼不锈钢用不烧镁钙砖的研制过程及其在冶炼不锈钢的 90tAOD炉炉帽和 90t装入包包底的应用情况。结果表明 :在 90t装入包包底的使用寿命达 1 1 0次 ,最大侵蚀速度仅为 1 .50mm·次 -1 左右 ;在 90tAOD炉炉帽上的使用寿命达 2 1 7次 ,最大侵蚀速度仅 0 .55mm·次-1 ,但存在裂纹和剥落现象 ,今后应改进砖型设计 ,增加调整砖 ,以消除砌缝 ,提高衬砖的整体性和稳固性     

不锈钢在湿法磷酸中的应用

介绍湿法磷酸生产中杂质、操作条件、酸浓度、温度、搅拌、有饥物等对腐蚀的影响和材料选择的基本要素，并列出多种不锈钢的主要化学成份和几种工艺流程的材料选用表。     

中和法与水热法制铁氧体粉末对比实验研究

中和法和水热法制备粉体是目前常用的制备超细粉体材料的方法。通过对这两种方法进行制备铁氧体粉末的对比实验研究发现，中和法和水热法制得的粉体在性能上存在一些差异。水热法制得的粉体比中和法制得的粉体具有更好的分散性能、更窄、更细小的粒径范围和更大的比表面积。     

ASPECTS OF JOINT DESIGN AND EVALUATION IN THICK-ADHEREND APPLICATIONS

Structural adhesives are gaining wide recognition by industry as they offer engineering designers greater flexibility to achieve economic and technical advantages. In the marine industry there are potential applications for adhesives in various types of construction, for example, thick steel and composite adherends, (typically 5-15 mm thick). The applications include panels and large pipes. This article is largely concerned with the use of two-part epoxy adhesives. The purpose of this article is to understand and evaluate the weaknesses of adhesives and adherends, in relation to specific applications and to use design and material selection to alleviate them. This understanding can be extended to other thick adherend applications. This article will also highlight the impact of structural epoxy adhesive technology on the design and fabrication of steel, composite, and hybrid constructions. The benefits and inherent limitations that can accrue are quantified through three case studies related to thick adherend connections.     

Sulfur Versus Non-Sulfur Containing Polyimide Adhesives for Bonding Steel

Due to their superior thermal and chemical stability, polyimides are often used as adhesives in harsh environments. This study examines the effect on bond strength of thioether sulfur in the polyimide backbone. Bonds were made using steel that was believed to catalyze the oxidation of sulfur. In addition, non-sulfur containing polyimides with similar T_g were also studied for comparison. The polymer/metal interface was studied using both the T-peel and wedge tests. No apparent effect was observed in the T-peel test with steel where the T-peel strengths of non-sulfur and sulfur containing polyimides were similar. In the wedge test, however, the sulfur-containing BDSDA/ODA bonded to steel had the smallest initial crack length of 34 mm. However, the BTDA/APB bonds tested in a dry environment had the smallest crack growth. The sulfur-containing BTDA/ASD performed best of the bonds tested in a wet environment. Metal-catalyzed oxidation of sulfur was observed to take place in the steel case, but not to an extent to have a noticeable effect on peel strength.     

不锈钢在湿法磷酸中腐蚀行为研究

本文采用腐蚀实验和电化学测试方法对不锈钢在湿法磷酸中的腐蚀行为进行了研究，并进行钝化膜的组成与结构分析。研究表明，磷酸中加入ＳＯ４＾２＾－，ｃＬ＾－，Ｆ＾－均提高合金的维钝电流密度和致纯电流浓度，加速材料的腐蚀，这些杂质共存时腐蚀性更大。湿法磷酸中存在的Ｓｉ＾４＾＋，Ａｌ＾３＾＋，Ｍｇ＾２＾＋和Ｆｅ＾３＾＋起缓蚀作用。不锈钢纯化膜主要由Ｃｒ和Ｆｅ的氧化物组成，表面形成致密稳定的Ｃｒ２Ｏ３保护膜是提     

Electrochemical synthesis of polyindole on 304-stainless steel in LiClO4–acetonitrile solution and its corrosion performance

The use of electrochemically synthesized polyindole (PIN) film was investigated for protective coating on 304-stainless steel (SS). Polyindole was deposited via anodic oxidation of the corresponding monomer, indole in acetonitrile (ACN) solution containing LiClO₄. It provided an adherent and stable coating on SS. The corrosion performance of coated and uncoated SS was investigated in 3.5% NaCl solution using electrochemical impedance spectroscopy (EIS), anodic polarization curves and open-circuit potential–time (E_ocp–t) diagrams. These tests demonstrated that PIN coating provided important barrier effect to SS for important immersion times in aggressive medium.     

高功率移相器粘接工艺初探

主要介绍了粘接技术在高功率铁氧体移相器上的应用。通过对其工艺途径及关键工序的控制，提出了采用粘接技术完成高功率移相器铁氧体的连接，不仅可以大量地缩短工作时间，而且可以使制造成本大幅度降低。