High cycle fatigue behaviour of Ti–6Al–4V alloy at elevated temperatures

High cycle fatigue behaviour of Ti–6Al–4V alloy was studied at 623 K and 723 K. Fatigue strength decreased at elevated temperatures compared with at ambient temperature. In the short life regime, fatigue strength was lower at 723 K than at 623 K, but in the long life regime it was nearly the same at both temperatures. At elevated temperatures, cracks were generated earlier at applied stresses below the fatigue limit at ambient temperature, indicating lowered crack initiation resistance. Small cracks grew faster at elevated temperatures than at ambient temperature, which became more noticeable with increasing temperature. After allowing for the elastic modulus, small cracks still grew faster at elevated temperatures.     

结晶器液压振动技术在梅山高效连铸中的应用

为了得到较好的铸坯表面质量,满足生产高附加值、高技术含量的钢种要求,梅山炼钢厂在2#高效连铸机上引进了国际上较先进的结晶器液压振动技术,具体介绍了该结晶器液压振动技术的基本参数和实际应用。     

湿法磷酸过滤设备和管道结垢原因分析及控制研究

分析湿法磷酸过滤设备与管道结垢的主要原因是氟硅酸钾、钠盐因磷酸液相温度下降而沉积下来。提出采用添加剂,抑制或提前析出氟硅酸钾、钠盐,同时进行了5种添加剂的实验室研究:均有较好的阻垢效果,但最终选择添加剂E(氟硅酸),阻垢率可达70%以上,添加量以0.5g/100g磷矿为宜。     

Combinatorial materials research applied to the development of new surface coatings: II. Process capability analysis of the coating formulation workflow

A combinatorial process has been developed for the high throughput production and evaluation of surface coatings. The workflow designed for the production of arrays of liquid coatings involves the robotic transfer of aliquots of solutions of raw materials to an array of glass vials and mixing of the coatings using an unconventional magnetic stirring process. An investigation of the capability of the workflow to accurately and repeatedly prepare coating arrays was conducted as a function of solution viscosity and aliquot size. In addition, mixing capability was evaluated as a function of solution viscosity, total solution volume, and mechanism of stirring. Overall, the results of the study indicated that adequate accuracy and repeatability of the coating preparation process can be achieved as long as raw material solutions are designed such that viscosity is below about 250 cP and aliquot sizes are above about 75 μl. With regard to mixing capability, total solution volume was found to have a profound affect as did the stirring mechanism.     

FC-26高中油型加氢裂化催化剂的工艺研究

抚顺石油化工研究院研制开发的新一代FC -2 6高中油型加氢裂化催化剂 ,以W -Ni为加氢组分 ,以无定型硅铝为主载体 ,并添加改性分子筛。工艺研究及工业应用结果表明 ,FC -2 6催化剂活性及中油选择性高 ,稳定性好 ,原料适应性强 ,具有广阔的应用前景。     

凹凸棒粘土用作高水速凝注浆悬浮剂

以凹凸棒粘土作为高水速凝固化充填材料的悬浮稳定剂，考察了不同制浆机械对凹凸棒粘土制浆率的影响。采用高剪切混合乳化机预制的1％凹凸棒粘土浆配制高水速凝固化充填材料甲、已料单浆可获得满意的悬浮稳定效果。其充填体结石抗压强度早期发展迅速，后期持续增长。采用此工艺，注浆料的材料成本仅增加2％。     

钛酸钾品须填充UHMWPE复合材料的摩擦磨损性能研究

用钛酸钾晶须(PTW)对超高摩尔质量聚乙烯(UHMWPE)进行填充改性,考察了复合材料的摩擦磨损性能,研究了其结晶情况,观察了磨损表面形貌并分析了其机理.结果表明随着PTW用量的增加,复合材料的硬度、结晶度以及维卡软化点都有所增大.PTW提高了复合材料的耐磨性,但摩擦系数有所上升.PTW的加入使得UHMWPE的磨损机理从黏着磨损和塑性变形改变成疲劳磨损和轻微的塑性变形,提高了其抗磨粒磨损的性能.     

高聚合度聚氯乙烯的加工性能

本文对高聚合度聚氯乙烯(H-PVC)的发展及其优异的物理机械性能作了简要介绍;着重分析了H-PVC的加工性能和表征方法,并讨论了分子特性和颗料特性及加工组成、加工条件对加工性能的影响,提出了改进H-PVC加工性能的方法。     

In vitro effects of urease inhibitors on rate of urea hydrolysis in soils

We studied the effect of urease inhibitors on the urea hydrolysis in some Sundanese soils belonging to the orders of Vertisol and Entisol. The hydrolysis showed a lag period of about 3 days and its rate (Y) per unit time (t) could be described by a two constants exponential equation of the general form Y = K₁t^K ₂. Statistical analysis showed that the intercept K₁ (rate of urea hydrolysis) was significantly affected by soil type rather than treatment. It seems that K₁ is associated with the soils' initial urease activity as it closely correlates with the Michaelis constant (km).The gradient, K₂, being significantly affected by soil type as well as treatment is probably associated with the induced urease activity with time and it, therefore, varied with variations in soils and treatments. Of the so-called urease inhibitors used in this study Ca(OH)₂, p-benzoquinone (PBQ) and orthophosphoric acid (OP) only PBQ reduced urea hydrolysis while the other chemicals have effects possibly related to modifying the soil pH. Inhibitor treated soils had substantial amounts of unacounted for N which was believed to be present, presumably, in the form of carbamate.Contribution from the Department of Biochemistry and Soil Science, Faculty of Agriculture, Shambat, Sudan.