粘土作为高放废物处置回填材料的可行性研究

本文以西北粘土为对象,对其压实行为、热传导、膨胀特性,以及吸附和渗透性能进行了初步研究,借以探讨西北粘土在高放废物处置中用作回填材料的可行性。试验表明,以西北粘土为基材,经过适当的热改性和吸附改性,在初始含水量约为9%,于70MPa 下成型,用作高放废物处置中的回填材料是可行的。     

Investigation on compounding and application of C80-C100 high-performance concrete

This paper presents the compounding technology and application of C80-C100 high-performance concrete (HPC) containing ultra-pulverized fly ash composite (PFAC) and superplasticizer. The properties of C80-C100 HPC are also studied systematically. The experimental results indicate that this concrete has excellent workability, high strength, lower drying shrinkage, outstanding volume stability, durability, etc.     

Porosity of recycled concrete with substitution of recycled concrete aggregate: An experimental study

In this paper, we present the experimental analysis of samples of recycled concrete (RC) with replacement of natural aggregate (NA) by recycled aggregate originating from concrete (RCA). The results of the tests of mechanical properties of RC were used for comparison with tests of mercury intrusion porosimetry (MIP), in which the distribution of the theoretical pore radius, critical pore ratio, the surface area of the concrete, threshold ratio and average pore radius were studied at ages of 7, 28 and 90 days. The results showed some variation in the properties of the RC with respect to ordinary concrete. Porosity increases considerably when NA is replaced by RCA. Additionally, a reduction in the mechanical properties of the RC is seen compared with ordinary concrete when porosity increases.     

硅灰混凝土的研究及其在公路道面的应用

 了提高道路路面混凝土的抗磨能力，采用硅灰代替部分水泥的方法，对硅灰混凝土的性能进行了较系统的试验研究。成果表明其抗压强度、抗弯强度、抗磨强度等指标都得到明显提高，全面达到和超过了规范要求。并已在丹江口水利枢纽上坝公路中得到应用，实践证明硅灰混凝土技术可靠、经济合理、易于施工。特别是抗磨度的提高，对延长公路路面的使用寿命具有重要意义。     

微合金化高强度钢轧制采用的工艺技术

本文综述微合金化高强度钢轧制采用的工艺技术，其中包括热装热送、板坯加热、控轧控冷、快速冷却、采用的新设备等工艺技术。重点是生产低碳、高韧性、高强度、易焊接的造船用钢采用形变热处理技术，以提高产量和质量，节省昂贵的Ｎｉ、Ｃｒ、Ｍｏ等合金，降低生产成本。     

Ionic Strength Effects on Heat-induced Gelation of Myofibrils and Myosin from Fast- and Slow-twitch Rabbit Muscles

The effects of ionic strength on myofibrils and myosin from rabbit fast-twitch Psoas major (PM) and slow-twitch Semimembranosus proprius (SMp) muscles before and after heating were studied by electron microscopy and thermal scanning rheometry. The direct suspension of proteins in low ionic strength (0.2M KCl; pH 6.0) led to very weak gels, whereas a gradual lowering of the ionic strength (by dialysis against 0.2M KCl; pH 6.0) of 0.6M KCl protein solutions induced strand-type networks at low temperature and strong heat-induced gels. As shown by transmission and scanning electron micrographs, in low ionic strength, SMp myosins formed shorter filaments before heating and thinner and shorter structures in heat-induced gels, as well as a lower gel porosity than PM myosins.     

高强度烧结钢

为开拓粉末冶金材料新的应用领域，近年来对高强度烧结钢进行了大量的研究与开发。本文简要介绍Ｈｏｇａｎａｓ公司开发的一些高强粉末冶金材料及对一些高强度烧结材料尺寸变化的控制。     

Rene′95粉末合金喷丸强化研究

研究了Ｒｅｎｅ′９５热等静压粉末高温合金喷丸后的残余应力场、组织结构、致密度及其与疲劳性能的关系。结果指出，喷丸强化能够有效地提高合金高周和低周疲劳强度。     

高温过热器12Cr2MoWVTib（102）钢管的显微组织和相结构分析

本文对原始状态和在火力发电厂使用不同时间的高这热器１０２钢管进行了显微组织和相结构变化规律的探讨和研究。显微组织研究表明，１０２钢管在高温高压下长期运行过程中，使用温度对显微组织和碳化物相有明显影响，而使用时间对其影响不如温度影响强烈。碳化物颗粒图象分析表明，碳化物随着使用时间缓慢长大，而新的碳化物不沉淀，使颗粒总数不断增加，颗粒，间距逐渐缩小。Ｘ射线衍射数据证明，钢管在高温长期使用过程中，ＭＣ相     

固定电子分立元器件用胶粘剂E—4X的研制

介绍了一种不同于灌封材料，具有触变性，粘接性能优良，使用方便的固定电子分立元器件用胶粘剂Ｅ－４Ｘ。与国外同类产品Ｅｐ－４３３ｘ胶粘剂对比，其综合性能优于Ｅｐ－４３３胶粘剂。