Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .     

A parametric interpolator with confined chord errors, acceleration and deceleration for NC machining

Parametric interpolation has many advantages over linear interpolation in machining curves. Real time parametric interpolation research so far has addressed achieving a uniform feed rate, confined chord errors and jerk limited trajectory planning. However, simultaneous consideration of confined chord errors that respect the acceleration and deceleration capabilities of the machine has not been attempted. In this paper, the offline detection of feed rate sensitive corners is proposed. The velocity profile in these zones is planned so that chord errors are satisfied while simultaneously accommodating the machine's acceleration and deceleration limits. Outside the zone of the feed rate sensitive corners, the feed rate is planned using the Taylor approximation. Simulation results indicate that the offline detection of feed rate sensitive corners improves parametric interpolation. For real time interpolation, the parametric curve information can be augmented with the detected feed rate sensitive corners that are stored in 2×2 matrices.     

FuzzyBagging: A novel ensemble of classifiers

In this work, a new method for the creation of classifier ensembles is introduced. The patterns are partitioned into clusters to group together similar patterns, a training set is built using the patterns that belong to a cluster. Each of the new sets is used to train a classifier. We show that the approach here presented, called FuzzyBagging, obtains performance better than Bagging.     

面向对象机器翻译知识库IMT—KB的设计与实现

机器翻译知识库是机译系统的重要组成部分,针对传统机译知识库的不足之处,本文提出一种面向对象的机译知识体系结构,同时给出这种具有层次性和模块性机译知识库的存储组织和管理机制。     

Efficient prolog programming

This paper presents some basic programming strategies for Prolog programmers. The strategies are based on knowledge about the operational behaviour of the Warren Abstract Machine (WAM). The aim is to provide simple principles for making programs both faster and less space-consuming. The programming hints given are mostly local, i.e. only a single clause or procedure need be considered at a time.     

CNC机床结构动态设计方法研究

提出机床结构动态设计基本原则。以某数控弧齿铣齿机为研究对象,应用相关的动态设计原则,通过变量化设计与有限元分析,对该机床进行结构动态设计。结果表明,应用该方法设计的机床结构具有良好的动静态特性。     

数控机床交流伺服系统的复合控制研究

针对常规P-P与PPI控制存在的问题，提出了在数控机床交流伺服系统中，采用带速度和加速度作为前馈控制，模糊自校正PID控制作为位置反馈控制的复合控制器，实验证明可以显著提高控制系统的控制精度，大大降低跟踪误差，具有较强的鲁棒性。     

从萨沃伊别墅探究勒·柯布西耶的机器美学

文章论述了萨沃伊别墅的机器美学思想,主要结合了勒·柯布西耶在1926年提出的"建筑新五点"来探讨他所主张的机器美学在萨沃伊别墅上是如何得以实现。     

台达机电产品在高速集束球经机中的应用

本文主要介绍台达20PM运动控制器在纺织行业的高速集束球经机中的应用。阐述了球经机的技术特点和工艺要求,简介了控制系统的硬件配置和应用程序。在控制系统中利用20PM内置的多组电子凸轮功能实现了两边成型和精密绕排等各项工艺目标。     

LPNet: A DNN based latency prediction technique for application mapping in Network-on-Chip design

Analytical models used for latency estimation of Network-on-Chip (NoC) are not producing reliable accuracy. This makes these analytical models difficult to use in optimization of design space exploration. In this paper, we propose a learning based model using deep neural network (DNN) for latency predictions. Input features for DNN model are collected from analytical model as well as from Booksim simulator. Then this DNN model has been adopted in mapping optimization loop for predicting the best mapping of given application and NoC parameters combination. Our simulations show that using the proposed DNN model, prediction error is less than 12% for both synthetic and application specific traffic. More than 108 times speedup could be achieved using DPSO with DNN model compared to DPSO using Booksim simulator.