Toward in-situ flaw detection in laser powder bed fusion additive manufacturing through layerwise imagery and machine learning

Process monitoring in additive manufacturing may allow components to be certified cheaply and rapidly and opens the possibility of healing defects, if detected. Here, neural networks (NNs) and convolutional neural networks (CNNs) are trained to detect flaws in layerwise images of a build, using labeled XCT data as a ground truth. Multiple images were recorded after each layer before and after recoating with various lighting conditions. Classifying networks were given a single image or multiple images of various lighting conditions for training and testing. CNNs demonstrated significantly better performance than NNs across all tasks. Furthermore, CNNs demonstrated improved generalizability, i.e., the ability to generalize to more diverse data than either the training or validation data sets. Specifically, CNNs trained on high-resolution layerwise images from one build showed minimal loss in performance when applied to data from an independent build, whereas the performance of the NNs degraded significantly. CNN accuracy was also demonstrated to be a function of flaw size, suggesting that smaller flaws may be produced by mechanisms that do not alter the surface morphology of the build plate. CNNs demonstrated accuracies of 93.5 % on large (>200 μm) flaws when testing and training on components from the same build and accuracies of 87.3 % when testing on a previously unseen build. Finally, evidence linking the formation of large lack-of-fusion defects to the presence of process ejecta is presented.     

Physics-guided logistic classification for tool life modeling and process parameter optimization in machining

This paper describes a physics-guided logistic classification method for tool life modeling and process parameter optimization in machining. Tool life is modeled using a classification method since the exact tool life cannot be measured in a typical production environment where tool wear can only be directly measured when the tool is replaced. In this study, laboratory tool wear experiments are used to simulate tool wear data normally collected during part production. Two states are defined: tool not worn (class 0) and tool worn (class 1). The non-linear reduction in tool life with cutting speed is modeled by applying a logarithmic transformation to the inputs for the logistic classification model. A method for interpretability of the logistic model coefficients is provided by comparison with the empirical Taylor tool life model. The method is validated using tool wear experiments for milling. Results show that the physics-guided logistic classification method can predict tool life using limited datasets. A method for pre-process optimization of machining parameters using a probabilistic machining cost model is presented. The proposed method offers a robust and practical approach to tool life modeling and process parameter optimization in a production environment.     

A novel vision-based method for 3D profile extraction of wire harness in robotized assembly process

Automating stages for deformable objects in the production line, in which assembling a wire harness into a predefined position is a complex task owing to the specialized characteristics of the objects. Besides a few automatized systems proposed in the other studies to implement this task under simplified setup conditions, a significant portion of this process remains to be completed manually in industrial environments. To construct an automatic wire harness assembly system, the development of a method that can automatically detect the wire harness profile in a 3D environment and, consequently, guide robot arms to implement assembly tasks is indispensable. Therefore, this study presents an approach that satisfies this requirement, which not only proposes a deep learning-based system to detect the wire profile, but also improves the accuracy of the detected results through a correction method according to the depth values of contiguous areas. The verification of the approach in a robot system that highlights its usefulness and practicality demonstrates the potential of the proposed method to replace people and consequently, reduce labour costs in factory environments.     

计算机网络安全扫描技术研究

随着互联网技术的发展,网络安全问题日益突出。作为一种主动防御手段,网络安全扫描技术在保护网络安全方面发挥着越来越大的作用。本文主要对主机探测,端口扫描,操作系统探测以及漏洞扫描等四种主要的网络安全扫描技术做了研究。     

Semantic analysis in XTRA,an English — Chinese machine translation system

This paper concerns the resolution of lexical ambiguity in a machine translation environment. We describe the integration of principles of selection restrictions. Preference Semantics, and intelligent relaxation of constraints in handling lexical ambiguity. The approach differs from many previous MT systems in that it is more powerful than brute force systems, while more realistic than systems that assume a large degree of coded encyclopedia information for full understanding.     

基于机器视觉的隔热条尺寸测量系统

针对当前隔热条的尺寸测量仍停留在产品离线后,工作人员用卡尺测量,劳动强度大,工作效率低、测量精度易受人为因素影响的现状,本文提出将机器视觉技术引入到隔热条自动化生产线的在线尺寸检测系统中,这种非接触式测量既可以避免在测量过程中对隔热条的损坏,又可以提高测量精度和测量速度,从而达到提高测量效能的目的。     

关于节目主持人形象塑造教学过程中的技巧探析

节目主持人的形象直接影响着整个节目的质量,文章针对节目主持人形象问题的塑造展开了研究和分析,同时结合在实际教学中经常出现的问题,从主持人形象要求教学模式的实际情况出发,阐述和分析了主持人形象塑造教学过程中的教学技巧和方法。     

Particular behavior of spindle thermal deformation by thermal bending

Thermally induced errors reduce the accuracy in precision machining, and a great deal of research has been presented on compensation for these errors in machine tools. However, during the transition period after commencing or stopping spindle rotation, thermal deformation behavior is very complex. In particular, the y-directional movement of the vertical machining center cannot be explained by thermal expansion alone because of the relationship between deformation and temperature. Thermal bending that is generated from the thermal gradient in the structure causes this movement. In the research described in this paper, a theoretical explanation and an experimental verification is given for the particular behavior of spindle thermal deformation. As it is not easy to map the relationship of the compensation model, separation of the steady from the non-steady state in the mapping process is strongly recommended.     

A review of machine learning applications in IoT-integrated modern power systems

This paper aims to provide a systematic and comprehensive survey of state-of-the-art machine learning techniques and their potential applications in IoT-integrated power systems.     

Machine-Learning based methods in short-term load forecasting

Short-term load forecasting is of great significance to the secure and efficient operation of power systems. However, loads can be affected by a variety of external impact factors and thus involve high levels of uncertainties. So it is a challenging task to achieve an accurate load forecast. This paper discusses three commonly-used machine-learning methods used for load forecasting, i.e., the support vector machine method, the random forest regression method, and the long short-term memory neural network method. The features and applications of these methods are analyzed and compared. By integrating the advantages of these methods, a fusion forecasting approach and a data preprocessing technique are proposed for improving the forecasting accuracy. A comparative study based on real load data is performed to verify that the proposed approach is capable of achieving a relatively higher forecasting accuracy.