An efficient fluid-solid coupled finite element scheme for weapon fragmentation simulations

An efficient finite element (FE) scheme to deal with a class of coupled fluid-solid problems is presented. The main ingredients of such methodology are: an accurate Q1/P0 solid element (trilinear in velocities and constant piecewise-discontinuous pressures); a large deformation plasticity model; an algorithm to deal with material failure, cracking propagation and fragment formation; and a fragment rigidization methodology to avoid the possible numerical instabilities that may produce pieces of material flying away from the main solid body. All the mentioned schemes have been fully parallelized and coupled using a loose-embedded procedure with a well-established and validated computational fluid dynamics (CFD) code (FEFLO). A CSD and a CFD/CSD coupled case are presented and analyzed.     

Numerical simulations of crack tip fields in polycrystalline plastic solids

In this paper, modes I and II crack tip fields in polycrystalline plastic solids are studied under plane strain, small scale yielding conditions. Two different initial textures of an Al-Mg alloy, viz., continuous cast AA5754 sheets in the recrystallized and cold rolled conditions, are considered. The former is nearly-isotropic, while the latter displays distinct anisotropy. Finite element simulations are performed by employing crystal plasticity constitutive equations along with a Taylor-type homogenization as well as by using the Hill quadratic yield theory. It is found that significant texture evolution occurs close to the notch tip which profoundly influences the stress and plastic strain distributions. Also, the cold rolling texture gives rise to higher magnitude of plastic strain near the tip.     

A physical perspective of the element‐based finite volume method and FEM‐Galerkin methods within the framework of the space of finite elements

The literature shows an increasing number of works focused on investigating the behaviour of methods that uses concepts of control volumes in the solution of structural problems. In recent years, new approaches using unstructured meshes have been proposed, most of which addressing new applications and, to a lesser extent, the underling physical perspective. This paper presents a unified approach to the element‐based finite volume method and FEM‐Galerkin within the framework of the finite element space. Numerical examples highlight some accuracy issues associated with the element‐based finite volume method developed in this work. Copyright © 2014 John Wiley & Sons, Ltd.     

Importance of initial aortic properties on the evolving regional anisotropy, stiffness and wall thickness of human abdominal aortic aneurysms

Complementary advances in medical imaging, vascular biology and biomechanics promise to enable computational modelling of abdominal aortic aneurysms to play increasingly important roles in clinical decision processes. Using a finite-element-based growth and remodelling model of evolving aneurysm geometry and material properties, we show that regional variations in material anisotropy, stiffness and wall thickness should be expected to arise naturally and thus should be included in analyses of aneurysmal enlargement or wall stress. In addition, by initiating the model from best-fit material parameters estimated for non-aneurysmal aortas from different subjects, we show that the initial state of the aorta may influence strongly the subsequent rate of enlargement, wall thickness, mechanical behaviour and thus stress in the lesion. We submit, therefore, that clinically reliable modelling of the enlargement and overall rupture-potential of aneurysms may require both a better understanding of the mechanobiological processes that govern the evolution of these lesions and new methods of determining the patient-specific state of the pre-aneurysmal aorta (or correlation to currently unaffected portions thereof) through knowledge of demographics, comorbidities, lifestyle, genetics and future non-invasive or minimally invasive tests.     

含稀土铜基超细合金粉末在金刚石圆锯片上的应用研究

文章介绍了含稀土铜基超细合金粉末在金刚石圆锯片上的应用。对锯片刀头硬度进行了测试,并开展了锯片切割试验,结果表明：含稀土La和Y锯片刀头的硬度高于未添加稀土锯片（A锯片）和Co基锯片;在同一水平的锋利度方面,含La锯片使用寿命比A锯片和Co基锯片短,而含Y锯片的寿命比A锯片和Co基锯片都有不同程度的延长,切割性能改善明显。     

Can the dietary element content of virgin argan oils really be used for adulteration detection?

Levels of eight dietary elements were assessed by ICP-AES in virgin edible and beauty argan oil samples prepared from four remote locations of the argan forest, and over a three-year period. The data showed sufficiently little variability to assess that all argan oil samples present, in terms of dietary elements, a similar composition, independently from the tree location within the argan forest. Therefore, adulteration detection by trace element analysis in edible and beauty argan oil is a method that can be generalised.     

Co-contamination of aflatoxin B1 and fumonisin B1 in food and human dietary exposure in three areas of China

Aflatoxins and fumonisins are ubiquitous foodborne toxicants and the co-occurrence of these mycotoxins in human foods represents a significant public health concern, which has been strongly associated with human aflatoxicosis, neural tube defects, as well as many types of primary cancers. In this study the co-contamination of aflatoxin B₁ (AFB₁) and fumonisin B₁ (FB₁) in food and human dietary exposure was investigated in residents of three different areas of China. A total of 209 food samples were measured for AFB₁ and FB₁. The median AFB₁ levels were 13.5, 2.3 and 1.3?µg?kg^?1 and the median FB₁ levels were 2.6, 0.4 and 0.3?mg?kg^?1 in corn samples collected from Huaian (a high-risk area for oesophageal cancer), Fusui (a high-risk area for liver cancer) and Huantai (a low-risk area for both oesophageal and liver cancers), respectively. The median level of AFB₁ in plant oil of Fusui was the highest (52.3?µg?kg^?1) among all food samples analysed. Co-contamination of these two mycotoxins was found in corn, rice and wheat flour. Based on measured food consumption data, the averaged daily dietary intake of AFB₁ was 0.397?µg (range?=?0.269–1.218?µg) in residents of Huantai, 1.723?µg (0.224–49.772?µg) in Huaian, and 2.685?µg (1.006–14.534?µg) in Fusui. The averaged FB₁ daily dietary intake was 92.4?µg (range?=?55.0–362.1?µg) for residents of Huantai, 460.0?µg (83.2–2894.5?µg) in Huaian, and 138.6?µg (30.0–10,541.6?µg) in Fusui. These data suggest that the co-exposure to AFB₁ and FB₁ in residents of rural China may contribute to the aetiology of human chronic diseases in high-risk areas.     

小空间 大设计——家居装饰设计初探

本文从家居装饰设计的特点入手,阐述了家居装饰设计应当关注的要素,提出了各个功能空间装饰的具体特征和要求。     

原子吸收光谱法测定酥油中的微量元素

运用湿法消解和干灰化法等两种方法对工业用酥油和食用酥油进行消化处理,使用原子吸收光谱法测定了两种酥油中Ca、Na、Mg、Cu、Mn、Fe、Zn等7种微量元素。发现湿法消解在样品处理过程中优于干灰化法。采用湿法消解法回收率在95.98%—104.36%之间,相对标准偏差小于10%。     

原子吸收光谱法测定葡萄酒中铜、铁、锌、镁的含量

葡萄酒中的金属元素对人体健康非常有益.用硝酸-高氯酸对葡萄酒进行消化处理,采用原子吸收光谱法测定、处理溶液中铜、铁、锌、镁的含量.结果表明:使用原子吸收光谱法测定葡萄酒中金属元素的方法可行、准确、简便、快速.