不锈钢转化器在中小型硫酸装置上的应用前景

分析了传统碳钢转化器存在的缺点。相对于碳钢转化器，不锈钢转化器具有结构简单、安装方便、耐高温、不易漏气、维护工作量小等优点。通过碳钢转化器和不锈钢转化器结构和造价的比较，表明不锈钢转化器在中小型硫酸装置中也有良好的应用前景。     

氯溴异氰尿酸烟剂的快速分析方法

介绍了一种准确简便的测定氯溴异氰尿酸烟剂中的有效成份的分析方法——碘量法。在烘干的碘量瓶中,先放入KI和氯溴异氰尿酸,然后迅速加入H2SO4水溶液,用标准Na2S2O3滴定至无色,以Na2S2O3的消耗体积折算出烟剂中的有效成分含量。此法准确,操作简单,花费少,空白烟剂无干扰,非常适用于生产厂家控制氯溴异氰尿酸产品质量的要求。     

Preparation of dibasic acid-containing soy phospholipids by chemical and enzyme-catalyzed transesterification and evaluation of their surface-active properties

The preparation of dibasic acid-containing soy phospholipid was made by transesterification reaction with alkyl ester of diabasic acid with both lipase and alkoxide as a catalyst. The extent of incorporation of a dibasic acid varied with the molecular size of the dibasic acid. The extent of incorporation in soy phospholipids was 4–13% in the case of adipic acid and 9–20% in the case of sebacic acid. The surface-active properties of these modified soy phospholipids were examined and were found to be different from those of the original (unmodified) soy phospholipid. The interfacial properties such as critical micelle concentration (CMC), γ_CMC, surface excess concentration Γ_max, and minimum area per molecule (Å), and thermodynamic parameters such as standard free energy of micellization, were found to depend on the hydrophobic part of the dibasic acids.     

聚乳酸的直接合成研究(Ⅱ)

研究了以乳酸单体为原料的直接熔融缩聚的工艺条件,包括工艺路线、原料含水率、催化剂种类、温度及余压对合成的影响。结果表明:采用适当的工艺能通过熔融缩聚法制备出高分子质量的聚乳酸,且具有良好的生物降解性能。     

负载型磷钨酸催化杂醇油合成混合酯的研究

本实验以杂醇油和乙酸为原料，杂多酸HPW／MxOy为催化剂。在相同条件下将几种工艺进行比较，从而选出适合该酯化反应的工艺。同时考察了催化剂的用量、醇酸酯比、反应时间等对酯化反应的影响。并研究了杂多酸的重复使用性。确定了酯化率和酯含量最佳时的酯合成反应的工艺条件。     

磷钨酸催化合成丁酮乙二醇缩酮

以磷钨酸H3 PW12 O40 为催化剂 ,通过丁酮和乙二醇反应合成丁酮乙二醇缩酮。探讨了H3 PW12 O40 对缩酮反应的催化活性 ,较系统地研究了酮醇物质的量比、催化剂用量、反应时间等因素对产品收率的影响。实验表明 :H3 PW12 O40 是合成丁酮乙二醇缩酮的良好催化剂 ,在n(酮 )∶n(醇 ) =1∶1.75 ,催化剂用量为反应物料总质量的 1.2 5 % ,环己烷为带水剂 ,反应时间 2 .0h ,反应温度 72～ 96℃的优化条件下 ,丁酮乙二醇缩酮的收率可达 5 9.5 %。     

富马酸生产工艺进展

笔者通过对国内外富马酸生产工艺的比较，讨论分析了影响富马酸生产经济效益和产品质量的因素，提出根据建厂厂址自然条件和投资情况，合理选择工艺路线、设备、工艺参数的依据。     

甲氧胺盐酸盐的含量测定方法

提出了以酚酞为指示剂，氢氧化钠为滴定剂测定甲氧胺盐酸盐含量的方法。测定了甲氧胺盐酸盐的离解常数Ka，考察了干扰因素对测定的影响。结果表明，干扰物质NH4Cl在样品中的含量小于5％不影响测定。该方法具有简便、快速，准确等特点,测定了数批样品结果较满意。     

合成1-[4-(二甲氨基)苯基]马来酰亚胺的新方法

介绍了以生产香兰素主要副产物Ｎ，Ｎ—二甲基对苯二胺为原料，通过缩合、闭环等反应，以７５％总收率合成了标题化合物。元素分析、色谱－质谱联用、红外光谱及′ＨＮＭＲ谱等鉴定结果证明，该合成的化合物是一种纯度高，熔点为１５４℃～１５５℃的红棕色针状晶体，分子结构式为：     

A single amino acid change humanizes long-chain fatty acid binding and activation of mouse peroxisome proliferator-activated receptor α

Peroxisome proliferator-activated receptor α (PPARα) is an important regulator of hepatic lipid metabolism which functions through ligand binding. Despite high amino acid sequence identity (>90%), marked differences in PPARα ligand binding, activation and gene regulation have been noted across species. Similar to previous observations with synthetic agonists, we have recently reported differences in ligand affinities and extent of activation between human PPARα (hPPARα) and mouse PPARα (mPPARα) in response to long chain fatty acids (LCFA). The present study was aimed to determine if structural alterations could account for these differences. The binding of PPARα to LCFA was examined through in silico molecular modeling and docking simulations. Modeling suggested that variances at amino acid position 272 are likely to be responsible for differences in saturated LCFA binding to hPPARα and mPPARα. To confirm these results experimentally, LCFA binding, circular dichroism, and transactivation studies were performed using a F272I mutant form of mPPARα. Experimental data correlated with in silico docking simulations, further confirming the importance of amino acid 272 in LCFA binding. Although the driving force for evolution of species differences at this position are yet unidentified, this study enhances our understanding of ligand-induced regulation by PPARα and demonstrates the efficacy of molecular modeling and docking simulations.