模具沉积层应变的模拟

为分析沉积层应变的变化情况,并找出温度与形变的变化规律,采用有限元分析软件ANSYS计算并绘制不同时刻以及不同位置沉积层内的温度及应力应变曲线,在建立传热模型过程中考虑了金属液滴向沉积层的传热以及沉积层向系统外的热量散失等问题．采用在厚度方向以微小层逐层叠加来模拟涂层的增厚,并以此为基础构造沉积层有限元计算模型,应用单元生与死逐层激活层单元参与计算过程．实现移动边界以充分模拟真实的喷涂沉积过程．通过分析不同时刻以及不同位置沉积层内的应力应变曲线,获得了沉积层应力应变变化规律．结果表明,沉积层内存在残余塑性应变,且沉积层与母模接触部位等效应力最大,是最易翘曲的地方,验证了沉积层失稳的一般形式．     

Reserve estimation of an open pit mine under price uncertainty by real option approach

Reserve estimation is a key to find the correct NPV in a mining project. The most important factor in reserve estimation is the metal price. Metal price fluctuations in recent years were exaggerated, and imposed a high degree of uncertainty to the re-serve estimation, and in consequence to the whole mine planning procedure. Real option approach is an efficient method of deci-sion making in the uncertain conditions. This approach has been used for evaluation of defined natural resources projects until now. This study considering the metal price uncertainty used real option approach to prepare a methodology for reserve estimation in open pit mines. This study was done on a copper cylindrical deposit, but the achieved methodology can be adjusted for all kinds of deposits. This methodology was comprehensively described through the examples in such a manner that can be used by the mine planners.     

江西浒坑钨矿含矿韧性剪切带及其^40Ar-^39Ar年代学约束

江西省浒坑钨矿是一个大型石英脉黑钨矿矿床,含矿石英脉除了块状石英脉以外,还大量发育条带状石英脉。本文针对条带状石英脉进行了专门研究,认为条带状石英脉实质上是韧性剪切带,以透入性发育的剪切面理和拉伸线理、剪切透镜体、剪切分异条带普遍发育为特色。剪切带岩石以石英质糜棱岩为主,具有丰富的塑性变形显微构造特征。显微剪切指向构造统计表明,东西向和北西向脉组的运动方式均以左旋正滑为主,近水平脉组则以正滑为主。北西向韧性剪切带的新生绢云母^40Ar-^39Ar坪年龄为140．3±1．0Ma,相应的等时线年龄为139．6±2．4Ma;而东西向韧性剪切带绢云母^40Ar-^39Ar坪年龄则比较复杂,高温阶段年龄可能受到成矿期白云母残斑的影响,中温阶段的表观年龄和总气体年龄更接近前一样品的坪年龄。据此认为韧性剪切变形的年龄为140Ma左右,韧性变形发生在成岩和成矿之后。条带状石英脉系块状石英脉韧性剪切改造而成,推测其形成主要与晚期补充岩体的斜向上侵作用有关,但更为合理的模式需要更多资料的进一步证实。     

广西老堡铅锌矿褶皱形成机制及其控矿规律

老堡铅锌矿床主要赋存在陡山沱组白云岩或老堡组硅质岩中,顺层产出,受地层与褶皱的双重控制。矿区主干褶皱为一复式向斜,由2个次级向斜和1个次级背斜组成。从构造几何学、运动学角度,运用现代测试技术,对矿区的小构造、显微构造和组构进行构造分析后揭示,老堡褶皱构造的形成机制是以弯滑作用为主、兼具弯流作用的纵弯褶皱作用的产物。铅锌矿体主要赋存在褶皱的转折端虚脱部位及两翼滑移量较大的层间滑动破碎带中。     

气固错流移动颗粒床过滤器压降特性研究

研究了错流移动颗粒床过滤器操作压降与过滤介质特性、表现过滤气速、颗粒层移动速度和床层粉尘沉积量之间的关系。结果表明，无粉尘沉积时，床层压降可以用Ergun方程计算。颗粒层移动速度的变化并不会造成床层压降的显著变化。除尘过程中，床层内粉尘沉积量随气体中粉尘浓度的增大、颗粒层移动速度的减小而增加，同时将导致床层压降的显著增大。错流移动床除尘操作压降可以用带修正项的Ergun方程计算，其修正项为比沉积率和颗粒层空欧率的函数。在实验数据范围内，该方程的计算结果与实验数据最大偏差小于15％。     

综合物化探方法在内蒙古张家沟银铅锌矿床勘查中的应用

本文在野外勘探成果的基础上结合室内研究总结了张家沟银铅锌矿矿床的地球物理及地球化学特征,归纳了张家沟银铅锌矿矿床地质、地球物理、地球化学找矿标志,提出了该区地球物理综合找矿方法技术集成,进一步提出了张家沟银铅锌矿床找矿方向,应注意岩体内外接触破碎带两侧次级羽状纵张裂隙带及磁力推测断裂构造汇部位,特别是负磁异常区域并伴有土壤地化异常部位的含矿性研究。     

海相沉积淤泥复合固化强度的试验研究

针对现有淤泥固化试验采用的固化剂相对单一的问题,为了系统研究多材料固化滨海沉积淤泥强度特性,以唐山南堡典型滨海沉积淤泥为研究对象,通过对比单掺、双掺及三掺等固化剪切强度,结合粉煤灰废物利用问题,系统研究了水泥、生石灰及粉煤灰等不同固化剂组合对滨海相沉积淤泥固化强度的影响。结果表明:不同固化剂对滨海相沉积淤泥抗剪强度影响的差异较为明显,抗剪强度基本随掺加固化剂的种类增加而增加,掺加6%生石灰、10%水泥和6%粉煤灰28 d龄期的固化淤泥抗剪强度最高,其黏聚力为238.4 kPa、内摩擦角为32.94°;抗剪强度指标的提高随龄期的变化存在差异,即淤泥单掺生石灰抗剪强度指标的提高主要在养护后期,施工中可适当增加闷料时间以使生石灰和淤泥颗粒反应充分;采用水泥来固化淤泥可在短期内明显提高强度,在高含水率的淤泥材料施工中有更好的工程效果;固化剂掺量相同情况下,抗剪强度随着龄期增长而增加。研究成果对滨海沉积淤泥的固化和工程应用具有参考价值。     

Comparisons of Fly Ash and Deposition Between Air and Oxy-FuelCombustion in Bench-Scale Fluidized Bed with Limestone Addition

In Oxy-fuel circulating fluidized bed, the residual CaO particles may react with high concentration of CO₂ in flue gas to form bonded deposit on heat transfer surfaces in backpass when limestone is used as a sorbent to capture SO₂.In this paper, experiments were designed on ash deposition in a bench-scale fluidized bed under oxy-fuel and air atmosphere. A novel ash deposit sampling probe was used to simulate the tubes of tail surfaces. The chemical composition of fly ash and ash deposit from both air-firing and oxy-fuel firing cases were analyzed by Inductively Coupled Plasma-Atomic Emission Spectrometry(ICP-AES) and Scanning Electron Microscopy(SEM), respectively. The degrees of carbonation reaction of ash deposits were measured by Thermo Gravimetric Analysis. The results showed that there are distinct differences in fly ash deposition rate between oxy-fuel and air firing cases, and oxy-fuel combustion with limestone addition can affect chemical composition of fly ash and ash deposit, especially for elements of Ca, Na, K, and S. However, the carbonation reaction degree of ash deposits is found weak, which is due to the relatively low CaO content in ash deposit or not long enough of the sampling time.[JP]     

Risk reduction in Sechahun iron ore deposit by geological boundary modification using multiple indicator Kriging

Uncertainty on the geological contacts and the block volumes of the models along boundaries is often a major part of the global uncertainty of reserve estimation.This work introduces a geostatistical technique that has been developed and tested in an iron ore deposit at Bafq mining district,in central Iran,and that,based on a probability criterion,helps to objectively model the geometry of this iron ore deposit.The main problem in reserve estimation of this ore body is its geometrical modeling and uncertainty in geological boundaries.This work deals with the geostatistical method of multiple indicator kriging,which is used to determine the real boundaries of ore body in different categories.This approach has potential to improve project performance and decrease operational risk.For this purpose,the ore body is separated into two categories including rich iron zone （w（Fe）〉45%） and poor iron zone （20%〈w（Fe）〈45%）.It significantly benefits to decrease the risk of reserve evaluation in the deposit.This case study also highlights the value of multiple indicator kriging as a tool for estimates the position of grade boundaries within the deposit.Comparison of the resultant probability maps with the real ore/waste contacts on the extracted levels shows that the first indicator model could separate the whole ore body （poor plus rich） from the waste zone by probability of more than 0.35,which concludes the total reserve of 53 million tons.The second indicator model applied to separate the rich and poor domains and the results show that the blocks with the estimated probability of equal to or more than 0.4 lay within the rich ore zone consisting of 15.8 million tons reserve.     

Investigation of thickness and wax content of wax deposits in polyethylene pipe using a flow loop

In this study, the thickness and wax content of wax deposits were found to be thinner and lower in the polyethylene (PE) pipe than in the stainless steel (SS) pipe using a flow loop apparatus. The diffusivity of wax, radial thermal gradient, and wax precipitation rate in the PE and SS pipes were calculated and compared. It was found the diffusivity of wax in the PE pipe was higher and tended to enhance the wax deposition in the PE pipe, while the radial thermal gradient and wax precipitation rate were lower in the PE pipe and had the opposite effects. These factors are shown to be comparable with each other and the effect of the thermal gradient dominates the mass flux of wax from bulk to the oil-deposit interface and into the deposits finally, thus causing differences in thickness and wax content of deposits between the PE and SS pipes.