Observation of single-walled carbon nanotubes by photoemission microscopy

Single-walled carbon nanotube networks grown on SiO₂ pillars were studied by means of scanning photoemission microscopy. The individual nanotubes or nanotube bundles growing from the pillar tops were observed in C 1s images. Band bending near catalytic Fe/nanotube contacts in an end-bonded configuration was studied by measuring C 1s spectra along the tube axes. Within our experimental resolution, no band bending was observed. This implies that the depletion width is less than the spatial resolution of the scanning photoemission microscope (90 nm) or that the amount of the band bending is less than 0.1 eV.     

High styrene–rubber ionomers,an alternative to thermoplastic elastomers

High styrene rubber ionomers were prepared by sulfonating styrene–butadiene rubber of high styrene content (high styrene rubber) in 1,2‐dichloroethane using acetyl sulfate reagent, followed by neutralization of the precursor acids using methanolic zinc acetate. The ionomers were characterized using X‐ray fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), dynamic mechanical analysis (DMA), and also by the evaluation of mechanical properties. The FTIR studies of the ionomer reveal that the sulfonate groups are attached to the benzene ring. The NMR spectra give credence to this observation. Results of DMA show an ionic transition (T_i) in addition to glass–rubber transition (T_g). Incorporation of ionic groups results in improved mechanical properties as well as retention of properties after three cycles of processing. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2294–2300, 2002     

湿法成型中稳定浆料的制备

为了满足各工业领域对陶瓷材料的需求,人们开发和研制多种适合成型复杂形状的湿法成型技术,湿法成型中最关键的一步是稳定浆料的制备。本文从稳定浆料的制备条件,形成稳定浆料的理论依据以及稳定浆料所具备的流变特性等几个方面,对湿法成型中浆料的制备进行了综述。     

Tensile properties of hollow glass bead‐filled polypropylene composites

The tensile properties of polypropylene (PP) filled with hollow glass beads have been measured at room temperature to identify the effects of the particle contents, size and its distribution on them in the present article. The mean diameters of the fillers were 11, 35, and 70 μm, and they were named as TK10, TK35, and TK70 respectively. The surface of these particles was pretreated with silane coupling agent. The results showed that the yield stress (σ_y) decreased gently for PP/TK70 systems, whereas decreased relatively obviously for PP/TK35 systems with increasing the volume fraction (?_f) of the fillers. When ?_f was less than 5%, the tensile strength at break (σ_b) of the composites increased with the increase of ?_f. When ?_f was more than 5%, σ_b was almost a constant for PP/TK70 systems, while σ_b decreased linearly for PP/TK35 systems. The tensile fracture strain (ε_b) of the composites decreased suddenly when ?_f was less than 5%, and then decreased slightly with increasing ?_f. When ?_f was 10%, σ_y and σ_b increased while ε_b decreased with the increase of the bead diameter. Furthermore, the σ_y was predicted by means an equation proposed in the previous work, and good interfacial adhesion was shown between the hollow glass beads and the matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1697–1701, 2007     

新型离子液体气相色谱固定相研究

合成了一种用作新型气相色谱固定相的室温离子液体[C7H17NO] [(CF3SO2)2N]-,并考察其色谱性能。该固定相具有较好的成膜性、较高的柱效、较强的极性,对正构烷烃、芳香族化合物以及一些位置异构体具有良好的分离效果。     

大型玻璃钢污泥沉积池罩的优化设计

污泥沉积池罩是污泥沉积池的重要部件.由于其跨度大,长期处于酸性环境中,对材料的强度和防腐性能要求较高,玻璃钢是最为理想的选材.本文根据污泥沉积池罩的受力和安装要求,利用大型通用有限元工程设计软件ANSYS对污泥沉积池罩的外形、结构和重量进行了优化设计,最终设计出重量仅为11.2t,直径34m的玻璃钢污泥沉积池罩.     

Rheological and electrical properties of polycarbonate/multi-walled carbon nanotube composites

Rheological and electrical properties of the polycarbonate (PC)/multi-walled carbon nanotube (MWNT) were studied. The MWNT was funtoinalized by treating with the hydrogen peroxide (H₂O₂). The H₂O₂ treated MWNT was dried by thermal and freeze drying methods. From the morphological studies, the degree of entanglement of the MWNT was decreased after treating with the H₂O₂. For the H₂O₂ treated MWNT (thermal drying), the length of the MWNT was shortened compared that of the H₂O₂ treated MWNT (freeze drying). The rheological and electrical properties of the PC/MWNT (H₂O₂ treated) composites increased compared that of the PC/MWNT (untreated) composites. Also, the electrical conductivity showed higher value for the PC/MWNT (H₂O₂ treated, freeze drying) composites compared that of the PC/MWNT (H₂O₂ treated, thermal drying) composites. From the results of the morphological, rheological, and electrical properties of the PC/MWNT composites, it is suggested that the electrical and rheological properties of the PC/MWNT composites are affected by the MWNT-MWNT network structure, which is related with the MWNT morphologies such as the degree of aggregation and aspect ratio of the MWNT.     

Nitrogen transformations during hydrolysis and nitrification of urea

Nitrogen transformations occurring in ten soils fertilized with urea were determined during incubation in the laboratory for four weeks. Urea was applied at one rate, but with different placement methods. Urea was applied in solution, as prills with a 1 cm grid spacing and as prills with no spacing. Unfertilized soils and soils amended with KNO₃ solution were included as controls.Nitrite accumulated in the majority of soils treated with urea, and the maximum nitrite concentration measured was directly related to initial soil pH. Cumulative gaseous N losses as percentages of applied N were: NH₃, 0-59.6; N₂, 0-4.9; N₂O, 0-9.9; KMnO₄-N, 0-1.3; CH₃ONO, 0-<0.1. No gaseous N evolution was detected in control treatments. Gaseous N losses were correlated with soil pH (NH₃) maximum NO ₂ ^- concentration (N₂, N₂O, KMnO₄-N) and organic C content (N₂, N₂O). Fertilizer placement effects were generally not significant and were small in comparison with differences between soils.

---

Resumo Foram determinadas, durante incubação em laboratório por quatro semanas, as transformações do nitrogênio ocorridas em dez solos fertilizados com uréia. A uréia foi aplicada a um só nivel, mas com diferentes métodos de aplicação: em solução e em grânulos com 1 cm de espaçamento de grade e em grânulos sem espaçamento. Solos não fertilizados e solos corrigidos com solução de KNO₃ foram incluidos como controles.O nitrito acumulado na maioria dos solos tratados com uréia e a concentração máxima de nitrito medido foram diretamente relacionados ao pH inicial do solo. As perdas cumulativas de N gasoso tomadas em percentagens de N aplicado foram: NH₃, 0-59.6; N₂, 0-4.9; N₂O; 0-9.9; KMnO₄-N, 0-1.3; CH₃ONO, 0-<0.1. Não foi detectada liberação de N gasoso nos tratamentos de controle. As perdas de N gasoso foram relacionadas com o pH do solo (NH₃), concentração máxima de NO ₂ ^- (N₂, N₂O, KMnO₄-N) e teor de C orgânico (N₂, N₂O). Efeitos da aplicação de fertilizante não foram de um modo geral significativos e foram pequenos em comparação com as diferenças entre os solos.

     

基于神经网络技术的注塑成型注射压力和熔体温度预测

建立了基于径向基函数网络的注塑成型注射压力和熔体温度的预测模型，与BP神经网络模型和CAE结果进行了对比。结果表明，径向基函数网络在精度、训练速度等方面优于BP网络。     

Mechanical and tribological properties of glass–epoxy composites with and without graphite particulate filler

The objectives of this research article is to evaluate the mechanical and tribological properties of glass‐fiber‐reinforced epoxy (G–E) composites with and without graphite particulate filler. The laminates were fabricated by a dry hand layup technique. The mechanical properties, including tensile strength, tensile modulus, elongation at break, and surface hardness, were investigated in accordance with ASTM standards. From the experimental investigation, we found that the tensile strength and dimensional stability of the G–E composite increased with increasing graphite content. The effect of filler content (0–7.5 wt %) and sliding distance on the friction and wear behavior of the graphite‐filled G–E composite systems were studied. Also, conventional weighing, determination of the coefficient of friction, and examination of the worn surface morphological features by scanning electron microscopy (SEM) were done. A marginal increase in the coefficient of friction with sliding distance for the unfilled composites was noticed, but a slight reduction was noticed for the graphite‐filled composites. The 7.5% graphite‐filled G–E composite showed a lower friction coefficient for the sliding distances used. The wear loss of the composites decreased with increasing weight fraction of graphite filler and increased with increasing sliding distance. Failure mechanisms of the worn surfaces of the filled composites were established with SEM. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2472–2480, 2007