电磁搅拌技术在莱钢六号合金钢连铸机上的设计与应用

介绍结晶器电磁搅拌在矩形坯连铸机上的应用。采用内置式结晶器电磁搅拌后,连铸坯低倍组织大为改善,质量明显提高。     

钢铁企业全厂仪表维修设施设计初探

以我国某大型钢铁企业全厂仪表维修设施的设计方案为例,简要说明了仪修设施的设计原则、全厂仪表维修的一般解决方案,较详细地介绍了仪修设施专业划分、实验室及维修车间的设置和主要设备构成,为该类项目的设计和工程建设提供一定参考。     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.     

强磁场对硅锰铸钢于A_1点附近等温珠光体相变的影响

通过开展12 T强磁下硅锰铸钢(50Si_2Mn_3)于A_1点温度附近不同等温时间的热处理试验,并对比强磁场与无磁场条件下等温珠光体相变试验结果,研究了磁场对珠光体转变量及组织形貌的影响。研究表明,对于50Si_2Mn_3在A1点以下较高温度范围内,强磁场可缩短珠光体相变的孕育期,促进硅锰铸钢珠光体转变,使其转变量明显增加;强磁场能够提高珠光体转变临界点,使50Si_2Mn_3在A1点以上等温过程中能够发生珠光体相变。     

二溴对甲基偶氮甲磺光度法测定钢中微量锶

研究了二溴对甲基偶氮甲磺与锶生成2:1兰色络合物进行钢中微量锶的测定.该法λ_(max)=638nm,摩尔吸光系数E_(638)=5.01×10~4,锶量在0.02～0.34μg/L范围内服从比尔定律.方法已用于钢中微量锶的测定,结果满意.     

基于多目视觉的变形钢板三维测量方法

提出了一种使用4个相机测量变形钢板三维形状的方法;在没有纹理的钢板上画一些点,使用4个相机同时拍摄钢板;利用边缘检测算法找出钢板的边缘,利用特征点提取算法提取出4个图像中钢板上的特征点,并找到4个图像上精确的特征点匹配关系,然后测量出这些特征点的三维点;最后,以这些三维点为种子点向外区域增长,从而得到钢板的三维形状;实验对变形钢板进行三维测量,得到了钢板的精确的三维形状,结果验证了该方法的有效性和可行性。     

不锈钢活性炭滤器的氯腐蚀与防腐

本文就活性炭在预处理中脱氯的不锈钢滤器的氯腐蚀机理进行了探讨，并提出了不锈钢活性炭脱氯滤器的防腐方法和措施。     

A method for observing the three-dimensional morphologies of inclusions in steel

A method for observing the three-dimensional morphologies of inclusions by deeply eroding a steel sample with a kind of organic solution composed of bromine water,acetone,and HC1 (volume ratio,45∶45∶10...