Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materials

Sewage sludge ash (SSA) is a waste material obtained from the incineration of wastewater sludge. The physical, chemical and mineralogical characteristics of SSA, and the evaluation of its use in cement-based materials, are presented in this paper. Results show that SSA is composed of irregular grains having a high specific surface area and thus leading to a significantly high water demand. A fraction of the ash is rapidly soluble (sulfates, aluminum and silica) and can create new-formed products in presence of lime. SSA induces short delays of cement hydration, probably due to both minor elements of the ash and dilution effect. Compressive strengths of mortars containing 25% and 50% of SSA are always lower than those of reference mortars but it is shown that SSA has a long-term positive effect which might be related to a slight pozzolanic activity. The amount of elements leached from SSA mortars is slightly higher than from the reference mortar without residue but it remains of the same order of magnitude. An extensive literature review was performed in order to compare the residue used in this study with others included in the same category. This analysis highlighted the principal characteristics that must be taken into account to use SSA correctly in cement-based materials.     

转炉钢渣粉磨性能的实验研究

对转炉钢渣粉磨性能进行了实验研究。结果表明，钢渣的易磨性比熟料差，但优于矿渣。在钢渣所合矿物中，硅酸盐矿物易磨，含铁矿物难磨。通过粉后方式，可以将钢渣中具有胶凝活性的矿物选择性分离出来。     

塔里木油区低电阻率油层的判别解释方法

本文在分析油层低电阻率成因基础上,利用交会法、重叠法以及贝叶斯判别分析识别阳离子附加导电低电阻率油层,实现了用测井资料进行阳离子交换量和束缚水饱和度的连续计算。运用阳离子交换量模型计算含水饱和度以及用双孔隙、比表面和骨架导电模型计算可动水饱和度的方法判别和合理解释低电阻率油层,为塔里木油区低电阻率油藏产液特性的定量描述提供科学依据。     

延边地区矿产资源优势向经济优势转化研究

通过对延边地区矿产资源的优势、矿业开发利用存在的问题及矿产资源转化条件的分析，探讨延边地区矿业发展的战略重点、产业布局和相关的开发措施．     

A comparison of the tribological behaviour of steel/steel, steel/DLC and DLC/DLC contacts when lubricated with mineral and biodegradable oils

Diamond-like carbon (DLC) coatings, which can nowadays be applied to many highly loaded mechanical components, sometimes need to operate under lubricated conditions. It is reasonable to expect that in steel/DLC contacts, at least the steel counter body will behave according to conventional lubrication mechanisms and will interact with lubricants and additives in the contact. However, in DLC/DLC contacts, such mechanisms are still unclear. For example, the “inertness” of DLC coatings raises several questions about whether they are able to provide real boundary “lubrication” or whether they are just a “passive” member in these contacts. On the other hand, biodegradable oils, in particular vegetable base oils, possess a good lubricating ability, often much better than mineral or conventional synthetic oils as a result of the large amount of un-saturated and polar components that can promote the lubricity of DLC coatings. Accordingly, in this study, we present the results of experiments under severe boundary-lubrication conditions during reciprocating sliding. We look at the effect of the type of mating surfaces - steel/DLC, DLC/DLC and steel/steel - and the type of oil on the tribological performance of DLC coatings. We compare the wear and friction behaviours of two types of DLC coatings, i.e., a “pure” non-doped a-C:H DLC coating (denoted as a-DLC) and a WC-containing multilayer coating (denoted as W-DLC) tested with a mineral oil and a biodegradable vegetable oil. These oils, which have very different chemical compositions, were used as base oils and also with mild AW and strong EP additives. Among other things, the results confirm the following: (1) coating/coating lubricated contacts can resemble metal-lubrication mechanisms; (2) additives reduce wear in coating/coating contacts by up to 80%; (3) better wear and friction performance are obtained with oils that contain large amounts of polar and un-saturated molecules; (4) a coating/coating combination generally results in less wear than a steel/coating combination.     

A Stokesian dynamics approach for simulation of magnetic particle suspensions

The dynamic behaviour of μm-scale ferromagnetic particles in suspension is of interest for various mineral beneficiation processes. It is, however, difficult to experimentally study such processes at the particle-level. In these instances it can be advantageous to resort to suitable particle simulation methods.Stokesian dynamics is a mesh-free numerical technique developed for suspensions of nm to mm size particles. The method inherently considers hydrodynamic interactions, but additional interaction models can be included depending on the system under investigation. We here present a Stokesian dynamics (SD) implementation, which allows for simulation of the motion of suspended magnetic particles in presence of an external magnetic field. The magnetic interaction model includes particle-field interactions as well as pairwise interactions between magnetised particles.Simulations are compared with experiments using a laboratory-scale flow cell. The method is shown to be realistic for studying ferromagnetic suspensions in mineral processing applications, and can be useful in understanding and predicting the efficiency of mineral separation processes.     

Morphological enhancement of microscopy mineral image using opening‐ and closing‐based toggle operator

To enhance unclear microscopy mineral images, an algorithm based on toggle operator using opening and closing is proposed in this paper. Firstly, the specified toggle operator using opening and closing through designing the selection rules is analysed. Secondly, after importing the multiscale theory into the specified toggle operator, useful mineral image features, especially the mineral details, are extracted using the multiscale theory‐based toggle operator. Finally, the mineral image is enhanced through the strategy of enlarging the contrast between the extracted bright and dark image features. Experimental results on different types of mineral images verified that the proposed algorithm could effectively enhance mineral images and performed better than some other algorithms. The enhanced mineral image is clear and contains rich mineral details, whereas the grey scale distribution of the original mineral image is appropriately maintained. This would be useful for the further mineral analysis. Therefore, the proposed algorithm could be widely used for image‐based mineral applications.     

A process mineralogy approach to geometallurgical model refinement for the Namakwa Sands heavy minerals operations,west coast of South Africa

The original geometallurgical model for the Namakwa Sands deposit was modified to accommodate ore blends in addition to the various single ore types. A process mineralogy approach was followed in a structured and systematic manner to evaluate the integrity of the adjusted model, particularly for ilmenite and zircon, the minerals of highest intrinsic value. This study reproduced recovery relationships predicted by the geometallurgical model for each of the key process functions, and as a result the integrity of the geometallurgical model is validated. Overall, the recovery potential determined for ilmenite and zircon are well adjusted to model estimates. Poor mineral liberation, an anomalously high abundance of garnet and pyroxene and variation in particle chemistry are recognized as the key recovery penalties. The gangue content is the most significant constraint to ilmenite recovery, whereas zircon chemistry is the most important negative factor in the production of a premium quality zircon product. Results of this study contributed to the refinement of the current geometallurgical model and also identified opportunities to optimise mineral resource utilisation in the future.     

Numerical analysis of hydrocyclones with different vortex finder configurations

This paper presents a numerical study of the multiphase flow and performance of hydrocyclone by means of two-fluid model, with special reference to the effects of diameter, length and shape of vortex finder at a wide range of feed solids concentrations. The considered shapes include the conventional cylindrical style and the new conical and inverse conical styles. The simulation results are analysed with respect to cyclone flow and performance in term of cut size d₅₀, water split, Ecart probable E_p and inlet pressure drop. It is shown that when vortex finder diameter or shape varies, a compromised optimum performance can be identified, resulting in relatively small inlet pressure drop, E_p, and water split. Both d₅₀ and E_p are more sensitive to feed solids concentration than inlet pressure drop and water split. Overall, the effect of vortex finder length on the separation efficiency of particles is much less significant than diameter and shape, which shows opposite trends at low and high feed solids concentrations. All these results can be well explained using the predicted tangential and axial velocities and solid volume fraction.     

一种基于八叉树分解的岩矿储量估算方法

论述的基于八叉树分解的岩矿储量估算方法,是针对现有的估算方法普遍存在着对已知数据要求过多、使用繁琐等缺点而提出来的。该方法具有对采样数据的要求不高、使用简便快捷的特点,用在普查阶段的岩矿储量估算有着明显的优越性。