气辅注射工艺参数对气体穿透能力的影响

以某轿车后车门杂物箱盖为例，利用Moldflow软件和正交实验法，评价气体辅助注射成型的主要工艺参数对气体穿透能力和气辅零件质量的影响，并给出一组优化后的工艺参数。     

Relationship between Viscoelastic and Peeling Properties of Model Adhesives. Part 1. Cohesive Fracture

The viscoelastic and peeling properties of polybutadiene/tackifying resin compatible blends have been studied in detail. Viscoelastic properties have been described through the variations of the complex shear modulus, G*(ω), as a function of frequency, ω and peeling properties through the variations of peeling force (F) as a function of peeling rate (V).

After showing the objective character of the peeling curves obtained, the variations of the peeling force and peeling geometry have been studied as a function of volume fraction of the tackifying resin.

In this first paper, the analysis is focused on the first domain of the peeling curves, i.e. the cohesive fracture region. In this region, the peeling properties have been related to the viscoelastic properties in the terminal region of relaxation. It is shown that the longest relaxation time, τ_o, is a reducing parameter of the peeling curves, so a peeling master curve-which is independent of temperature, resin volume fraction and polymer molecular weight-may be defined. Furthermore, the variations of the test geometry as a function of peeling rate have been investigated: the variations of the radius of curvature of the aluminium foil have been analyzed with respect to the viscoelastic behavior of the adhesive, which in fact governs the test geometry.

A detailed analysis of all these features leads to a model which allows one to calculate the peeling curves in the cohesive domain from the adhesive formulation.     

Reactive rock phosphate fertilizers and soil testing for phosphorus: The effect of particle size of the rock phosphate

North Carolina rock phosphate (NCRP) (highly carbonate—substituted apatite) was ground to produce three samples with different particle size distributions. The effectiveness of these fertilizers was compared with the effectiveness of superphosphate in a field experiment and three glasshouse experiments using lateritic soils from south-western Australia. Non-reactive Queensland rock phosphate (low carbonate-substituted apatite from the Duchess deposit) was also used in the pot experiments. Bicarbonate-soluble phosphorus extracted from the soil is widely used in Western Australia to predict plant yields from previously-applied fertilizer dressings. For both field and pot experiments bicarbonate-extractable phosphorus (soil test value) was measured and related to subsequent plant yields.As calculated from the initial slope of the relationship between yield and the level of P applied, finely powdered NCRP was about 5–32% as effective as freshly-applied superphosphate in the year of application and also for two years after application in the field experiment, and for two successive crops in the three pot experiments. For both field and pot experiments, finely powdered NCRP, was at best, 1.5–2.0 times as effective as granular NCRP. Relative to freshly-applied superphosphate, the effectiveness of rock phosphates usually decreased with increasing level of application.For each of the crops in the field experiment, the relationships between yield and phosphorus content of plants (i.e. internal efficiency curves) were similar for all fertilizers. Thus the low effectiveness of the rock phosphates relative to superphosphate was solely due to much less phosphorus being taken up by plants. By contrast, in the pot experiments internal efficiency curves differed for different fertilizers. This is attributed to differences in the rate of phosphorus uptake by plant roots during the early stages of plant growth.For both field and pot experiments, soil test calibrations (the relationship between yield and soil test value) differed for rock phosphates and superphosphate. For superphosphate, soil test calibrations also differed for the three different years after the initial application of this fertilizer in the field experiment. For the second crop in the pot experiment, soil test calibrations differed for superphosphate applied at different times (before the first and the second crop). These results point out the difficulty of applying soil testing procedures to soils that have experienced different histories of fertilizer application.     

柔性分离盘抑制圆柱涡激振动的风洞试验

该文利用附属柔性分离盘对圆柱涡激振动(VIV)控制问题进行了风洞试验研究。针对弹性支撑的圆柱及不同长度柔性分离盘的试验模型,在雷诺数7 500-40 000情况下,测定不同约化速度(3.5-18.7)下的振动瞬态位移。结果表明:柔性分离盘长度(L)/圆柱直径(D)比为0.6、0.8和1三种圆柱的横向无因次均方根振幅远小于单圆柱,涡激振动抑制效果很好,均在77.6%以上,其中L=0.8D的圆柱抑制效果最佳,几乎无振动;而L=1.2D和1.5D的圆柱反而出现振动增强,约4.5%和9%。对比单圆柱的共振区,附属柔性分离盘的圆柱共振区在约化速度上更靠后且范围更大。     

微波合成阿司匹林的工艺研究

本论文采用微波方法合成阿司匹林，用无水碳酸钠作催化剂量，研究了微波在有机合成中的应用及其他加热原理。利用了交互的正交试验方法，在反应物配比、微波功率，辐射时间和催化剂用量这四个因素中寻找出最佳合成工艺条件，从而提高了阿司匹林的产率，实现了有效地利用微波技术促进有机合成反应。     

高浓度烤烟专用肥肥效试验

介绍高浓度烤烟专用肥肥效试验。结果表明：楚雄磷肥厂生产的高浓度烤烟肥，可以代替进口的同类化肥。     

发用防晒成分芦荟甙的提取

芦荟甙不仅具有防晒功效,而且还具有润泽、软化头发,防止断发、护发止痒的功效.设计正交实验,用乙醇水溶液回流溶出芦荟甙,用减压蒸馏的方法得到产品,并找出最佳反应条件.用溴水和红外光谱定性分析,证明了所得产品为芦荟甙.将芦荟甙加入洗发香波中,使用效果良好.实验方法操作简单、可行性高,为芦荟的提取研究提供数据.     

聚己二酸1,2-环己二醇酯的合成

采用正交实验方法,分别以钛酸四丁酯和对甲苯磺酸为催化剂,合成了聚己二酸1,2 环己二醇酯,对其合成工艺条件进行了研究,得出了最佳工艺条件。并以所得聚酯合成了具有透明度高、硬度大、耐磨、玻璃化温度高等优异性能的聚氨酯材料。     

Transformations of residual fertilizer P in a semi-arid tropical soil under eight-year peanut-wheat rotation

Long-term transformations of residual phosphorus (P) governs the availability of phosphorus to crops. Very limited information is available on the transformations of residual fertilizer P in semi-arid tropical soils under long-term crop rotations. Therefore, using sequential phosphorus fractionation procedure, we studied changes in labile and stable forms of inorganic and organic P in a semi-arid alluvial soil (Typic Ustisamments) after eight years of annual fertilizer P application either to one crop (alternate) or to both crops (cumulative) in a peanut (Arachis hypogaea) — wheat (Triticum aestivum) rotation.Total residual fertilizer P in soil (P recovered from P-fertilized minus control plots) ranged from 62 to 176 mg P kg^–1. In the alternate P treatments (P applied to peanut or wheat only), on an average of 3 rates of applied P (13, 26 and 39 kg P ha^–1), in surface (0–15 cm) and subsurface (15 to 30 cm) soil, respectively, residual fertilizer P consisted of 14.8 and 2.2% resin-P, 8.6 and 2.8% NaHCO₃-P, 6.3 and 0% microbial-P, 31.4 and 4.2% NaOH-P, 7.8 and 3.0% aggregate protected-P, 12.5 and 3.0% HCl-P, 3.4 and 0% H₂SO₄-P. The corresponding values for surface and subsurface soils of cumulative P treatments (P applied to both peanut and wheat) were: 12.8 and 1.6% resin-P, 6.9 and 2.3% NaHCO₃-P, 4.7 and 0% microbial-P, 32.5 and 4.2% NaOH-P, 5.6 and 2.0% aggregate protected-P, 14.8 and 3.8% HCl-P, 6.7 and 2.1% H₂SO₄-P. Considerable lower values for the 15–30 cm depth indicate only a very small movement of residual P to the subsoil.Significantly lower amount of fertilizer P (28% and 44%) found in labile (resin, NaHCO₃ and microbial P) and semi-labile (NaOH and sonicated NaOH P) fractions for the cumulative P treatment than alternate P treatment (35 and 46%, respectively) suggests that increased rates and frequency of applied P tend to enhance the conversion of residual P to stable forms which are less available to plants. About 12 to 19% of residual fertilizer P found as organic P in labile and semi-labile forms confirmed that organic P increased with long-term fertilizer management. In conclusion, the results of our study suggest that the alternate application of fertilizer P to a crop, as is shown for wheat, helps reduce the transformations of residual P to stable P forms.     

轴流压气机旋转失速建模与检测II: 基于北航低速压气机试验台的实验研究

轴流压气机旋转失速和喘振的提前检测对于提高压气机工作效率和稳定性具有重要的意义.本文以北京航空航天大学航空发动机重点实验室的低速轴流压气机实验台为研究对象,基于确定学习理论及动态模式识别方法,开展旋转失速初始扰动近似准确建模和快速检测研究.首先,在压气机机匣壁面周向布置多个动态压力传感器,获取压气机失速前和失速先兆的动态压力信号,基于确定学习理论对旋转失速初始扰动的内部系统动态进行建模;其次,基于以上建模,利用微小振动故障检测方法实现对旋转失速的离线和在线提前检测.实验结果表明,本文所提方法能够在不同转速情况下,提前0.3 s~1 s实现对旋转失速的实时在线检测.