ANOM在质量控制中的应用

ANOM（均值分析）是一种有效的质量工具，可以用来分析实验因素对输出的影响是否显著。可以应用于单因子，双因子的实验设计，无论是计量值数据，还是计数值数据，ANOM检验异常值的能力都很强，介绍了ANOM的基本分析过程，对ANOM和ANOVA进行了检验异常值灵敏度大小的比较，同时给出了实例。     

Chrestenson函数序列的生成方法及其数学分析

本文提出了适于三种序号的Ｃｈｒｅｓｔｅｎｓｏｎ函数序列的复制方法，对其复制过程进行了数学分析，并指出当Ｃｈｒｅｓｔｅｎｓｏｎ函数退化为Ｗａｌｓｈ函数时，此方法即为复制理论中的平移复制方法。     

重金属污染物动态吸附试验及数学模拟

本文采用泥沙动力学中Ｒｏｕｓｅ等人用来研究泥沙浓度沿垂线分布的装置。对泥沙吸附重金属污染物进行了动态模拟。试验分有底泥和无底泥两种情况。研究中发现在Ｒｏｕｓｅ装置的水力、泥沙条件下泥沙吸附重金属污染物达到平衡状态需要６小时以上，由极坐标下的重金属迁移转化数学模型方程，在本文具体试验条件下进行数值求解，计算结果和试验结果合良好，说明数学模型是正确合理的试验是可靠的。计算时依据室内静态试验结果，对动态     

低渗透挥发性油藏注烃类气驱室内实验研究

通过注烃类气驱实验研究，了解文留油田低渗透挥发性油藏注气开发的一般机理和开发特点。采用PVT分析方法分析地层流体的物理性质、注入溶剂的组份；通过细管实验研究地层流体同注入溶剂在130℃时的最小混相压力；长岩心驱替实验分析气驱、水驱、水气交替注气的采收率、压力的变化规律。细管实验研究表明，最小混相压力为47．1MPa，长岩心注天然气驱替实验表现出近混相的特征。天然气驱注气压力低，采收率高，适合于文南油田低渗透挥发性油藏。     

桌面式天线虚拟实验系统

将天线数值仿真技术与虚拟现实技术结合,构建一个桌面式天线虚拟实验系统,可以解决天线实验课开设成本高、场地受限等问题.     

Human urine - Chemical composition and fertilizer use efficiency

Stored human urine had pH values of 8.9 and was composed of eight main ionic species (> 0.1 meq L^–1), the cations Na, K, NH₄, Ca and the anions, Cl, SO₄, PO₄ and HCO₃. Nitrogen was mainly (> 90%) present as ammoniacal N, with ammonium bicarbonate being the dominant compound. Urea and urate decomposed during storage. Heavy metal concentrations in urine samples were low compared with other organic fertilizers, but copper, mercury, nickel and zinc were 10–500 times higher in urine than in precipitation and surface waters. In a pot experiment with¹⁵N labelled human urine, higher gaseous losses and lower crop uptake (barley) of urine N than of labelled ammonium nitrate were found. Phosphorus present in urine was utilized at a higher rate than soluble phosphate, showing that urine P is at least as available to crops as soluble P fertilizers.     

GaAs FET辐射退化研究

低噪声ＧａＡｓ ＦＥＴ和功率ＧａＡｓ ＦＥＴ经中子辐射都未发生致命性的通或断失效，直流偏置伏态下，其失效模式仅仅表现为源漏饱和电流ＩＤＳＳ的退化降低，据此提出了ＩＤＳＳ退化失效与快中子注量φｎ之间的解析关键式ｌｎｙ＝ａ＋ｂｌｎφ。     

The integral experiment on beryllium with D-T neutrons for verification of tritium breeding

A clean benchmark experiment on beryllium was performed with D-T neutrons at the FNS facility of the Japan Atomic Energy Agency. The main objective was to verify the integral data related to the tritium production on lithium isotopes. Tritium production rates, as well as activation reaction rates were measured inside the beryllium assembly that was shaped as a pseudo-cylindrical slab with an area-equivalent diameter of 628 mm and a thickness of 355 mm. Experimental results were analyzed with a three-dimensional Monte Carlo transport code MCNP-4C and FENDL/MC-2.0, JENDL-3.2/3.3 neutron transport libraries. Evaluation of reaction rates was based on the cross section data taken from the JENDL Dosimetry File and ENDF B-VI data libraries. Analysis shows that all calculation combinations (transport and activation cross section libraries) used for evaluation of reaction rates give data that is agreeable with measured values within 10%.     

Note on covering monotone orthogonal polygons with star-shaped polygons

In 1986, Keil provided an O(n²) time algorithm for the problem of covering monotone orthogonal polygons with the minimum number of r-star-shaped orthogonal polygons. This was later improved to O(n) time and space by Gewali et al. in [L. Gewali, M. Keil, S.C. Ntafos, On covering orthogonal polygons with star-shaped polygons, Information Sciences 65 (1992) 45-63]. In this paper we simplify the latter algorithm—we show that with a little modification, the first step Sweep1 of the discussed algorithm—which computes the top ceilings of horizontal grid segments—can be omitted.In addition, for the minimum orthogonal guard problem in the considered class of polygons, our approach provides a linear time algorithm which uses O(k) additional space, where k is the size of the optimal solution—the algorithm in [L. Gewali, M. Keil, S.C. Ntafos, On covering orthogonal polygons with star-shaped polygons, Information Sciences 65 (1992) 45-63] uses both O(n) time and O(n) additional space.