Solids Extraction of Cod Frame and Effects on Ultrafiltration of the Aqueous Extract

Grinding, pH adjustment, heat treatment and centrifugation were studied to recover solids from ground cod frames and to apply ultrafiltration (UF) to the resulting aqueous phase. Early heat treatment (90°C/20 min) dissolved collagen into aqueous phase resulting in a very low UF flux. A pH adjustment to 4.5 after grinding (～0.32 cm die), with no heat resulted in efficient separation after centrifuging. UF of the aqueous phase showed an increase in initial flux (23 L/hr m²). However, when the same aqueous material was heated and then centrifuged (1–2% solids removed), UF flux was further increased to 46 L/hr m²and this process gave highest solids recovery (90%).     

Sunflower Head Residue Pectin Extraction as Affected by Physical Conditions

Effects of extraction pH, temperature, and time on yield and quality of pectin from sunflower heads (Interstate cultivar) were investigated. The low-methoxyl pectin was extracted, using 0.75% sodium hexametaphosphate at pH 3, 4, and 5 and at 75, 85, and 95°for 20, 40, and 60 min, respectively. Yield, molecular mass, and firmness of jellies of the pectins were determined. Three-way statistical analysis on yield, molecular mass and gel firmness showed strong interactions among pH, temperature and time. Highest yields were obtained at pH 5, 95°for 20 min and pH 4, 85°for 40 min. Pectin extracted for 40 min at pH 3 and 4 and at 85°and 75°C, respectively, had the highest molecular mass. Gel firmness of sunflower pectin prepared at pH 5.4 was higher than that of a commercial citrus pectin.     

膜萃取器设计及应用研究进展

简要阐述了膜萃取的特点和基本类型;重点介绍了轴对称、纤维、片状等３种膜器的设计原理、特征以及膜过程设计．总结了膜萃取技术在金属离子分离、旋光化合物的分离、发酵萃取、医药萃取等方面的应用现状和最新进展;展望了膜萃取技术的发展趋势。     

超临界CO2萃取技术及成套装备

介绍了超临界CO2 萃取这一新兴分离技术在工业化装置的工艺流程、化工过程、设备及过程控制系统等方面的内容     

Modeling of a power electronic converter for EMC in the conduction emission frequency band

With the advancement of high‐frequency switching devices, electromagnetic interferences (EMI) have become problems in power electronic converter designs. It is necessary for an electromagnetic compatibility (EMC) design to prospect and consider its possible EMI levels. This paper describes how to compute effects from a power converter to an object point to reduce conduction EMI noises effectively by an appropriate design. Modeling techniques for converter elements are discussed for a model in the conduction emission frequency band by the parameter tuning method and for line constants by an analytical derivation. Then a derived model is simulated for harmonic distributions of loop currents and their magnetic fields. © 2002 Scripta Technica, Electr Eng Jpn, 139(1): 44–50, 2002: DOI 10.1002/eej.1145     

Atmospheric and low pressure shadow masked MOVPE growth of InGaAs(P)/InP and (In)GaAs/(Al)GaAs heterostructures and quantum wells

The shadow masked growth technique is presented as a tool to achieve thickness and bandgap variations laterally over the substrate during metalorganic vapor phase epitaxy. Lateral thickness and bandgap variations are very important for the fabrication of photonic integrated circuits, where several passive and active optical components need to be integrated on the same substrate. Several aspects of the shadow masked growth are characterized for InP based materials as well as for GaAs based materials. Thickness reductions are studied as a function of the mask dimensions, the reactor pressure, the orientation of the masked channels and the undercutting of the mask. The thickness reduction is strongly influenced by the mask dimensions and the reactor pressure, while the influence of the orientation of the channels and the amount of undercutting is only significant for narrow mask windows. During shadow masked growth, there are not only thickness variations but also compositional variations. Therefore, we studied the changes in In/Ga and As/P ratios for InGaAs and InGaAsP layers. It appears that mainly the In/Ga-ratio is responsible for compositional changes and that the As/P-ratio remains unchanged during shadow masked growth.     

Rapid analysis of polymer homologues and additives with SFE/SFC-MS coupling

A rapid and easy analysis method for polymers is presented. The method involves sample preparation by SFE, separation of the extracted compounds by SFC and simultaneous quantitative detection by FID, as well as identification of unknowns by MS. The applications illustrate how structural research work and routine polymer analysis can be done with this time saving method.     

Electrostatic polymer processing of isotactic poly(4-methyl-1-pentene) fibrous membrane

Isotactic poly(4-methyl-1-pentene) (P4M1P) is a widely used polymer in industrial applications and specifically, in medical products. Producing micro- or nanofibers would expand the usefulness of P4M1P to a broad range of medical applications. The choice and quality of solvent for the solution used for electrospinning can have a dramatic effect on the spinnability of fibers and on their morphological appearance. In this study, four solvent systems: cyclohexane, cyclohexane/acetone mixture, cyclohexane/dimethyl formamide (DMF) mixture and cyclohexane/acetone/DMF mixture have been investigated. As demonstrated by FE-SEM, electrospun fibers with different morphologies including round, twisted with a roughened texture, curled and twisted-ribbon shapes were formed. The fiber shape and morphology depended strongly on the type and amount of non-solvent used.     

Integrated Automation System for Rare Earth Countercurrent Extraction Process

Lower automation level in industrial rare-earth extraction processes results in high production cost, inconsistent product quality and great consumption of resources in China. An integrated automation system for extraction process of rare earth is proposed to realize optimal product indices, such as product purity, recycle rate and output. The optimal control strategy for output component, structure and function of the two-gradcd integrated automation system composed of the process management grade and the process control grade were discussed. This system is successfully applied to a HAB yttrium extraction production process and was found to provide optimal control, optimal operation, ontimal management and remarkable benefits.     

Direct Methods Optimised for Solving Crystal Structure by Powder Diffraction Data: Limits,Strategies, and Prospects

The ab-initio crystal structure solution by powder diffraction data requires great efforts because of the collapse of the experimental information onto the one dimensional 2θ axis of the pattern. Different strategies will be described aiming at improving the process of extraction of the integrated intensities from the experimental pattern in order to make more straightforward the structure solution process by direct methods. Particular attention will be devoted to the EXPO program. Some of its performance will be analysed and results will be shown.