Interactions between Cytochrome c and DNA Strands Self-Assembled at Gold Electrode

In this work, we reported the investigation on the interaction between DNA strands self-assembled at gold electrodes and an electron transfer protein, cytochrome c. We observed that cytochrome c exhibited well-defined electrochemistry in both double-stranded and single-stranded DNA films. This suggested that the electron transfer reaction of cytochrome c arose possibly due to the electron hopping along DNA strands rather than wiring along the double helix. We also compared the heterogeneous electron transfer rate of cytochrome c with that of a ruthenium complex, which further confirmed this mechanism.     

Gold nanoparticles on ceria: importance of O vacancies in the activation of gold

Synchrotron-based techniques (high-resolution photoemission, in-situ X-ray absorption spectroscopy, and time-resolved X-ray diffraction) have been used to study the destruction of SO₂ and the water-gas shift (WGS, CO + H₂O → H₂ + CO₂) reaction on a series of gold/ceria systems. The adsorption and chemistry of SO₂ was investigated on Au/CeO₂(111) and AuO _x /CeO₂ surfaces. The heat of adsorption of the molecule on Au nanoparticles supported on stoichiometric CeO₂(111) was 4–7 kcal/mol larger than on Au(111). However, there was negligible dissociation of SO₂ on the Au/CeO₂(111) surfaces. The full decomposition of SO₂ was observed only after introducing O vacancies in the ceria support. AuO _x /CeO₂ surfaces were found to be much less chemically active than Au/CeO₂(111) or Au/CeO_2−x (111) surfaces. In a separate set of experiments, in-situ time-resolved X-ray diffraction and X-ray absorption spectroscopy were used to monitor the behavior of nanostructured {Au + AuO _x }–CeO₂ catalysts under the WGS reaction. At temperatures above 250 °C, a complete AuO _x → Au transformation was observed with high catalytic activity. Photoemission results for the oxidation and reduction of Au nanoparticles supported on rough ceria films or a CeO₂(111) single crystal corroborate that cationic Au^δ+ species cannot be the key sites responsible for the WGS activity at high temperatures. The active sites in {Au + AuO _x }/ceria catalysts should involve pure gold nanoparticles in contact with O vacancies of the oxide.     

基于金纳米-植酸胶束混合组装的过氧化氢传感器的电化学研究

采用混合组装技术,利用植酸胶束(IP6micelles)的磷酸酯键络合辣根过氧化物酶(HRP)和金纳米粒子(GNPs),形成了具有生物亲和性的纳米复合材料,保持了辣根过氧化物酶的生物活性,并利用金纳米粒子的高电子密度、介电特性和催化性能,实现了HRP与玻碳电极(GCE)表面的直接电子转移。Nafion膜的滴加能提高电极的选择性和稳定性。实验过程中借助紫外-可见吸收光谱和透射电子显微镜进行表征,实验结果证明:GNPs的高导电和高催化性能,结合植酸胶束的优良生物相容性和对酶的高负载量的特点,使得吸附在其上的HRP保持活性,制备的生物传感器能对H2O2进行电催化还原。Nafion/HRP-IP6micelles-GNPs/GCE对H2O2的线性浓度范围为5×10-7～1.15×10-5mol/L(线性相关系数r=0.993,n=9),最低检测限为0.1μmol/L(信噪比S/N=3),米氏常数为0.002 4 mmol/L。     

An electrochemical study of the dissolution of gold in thiosulfate solutions. Part II. Effect of Copper

Thiosulfate has been considered as one of the most promising of the non-toxic alternatives to cyanide for the leaching of gold and much work has been carried out with the aim of understanding and improving the ammoniacal thiosulfate leaching process. In particular the behaviour of gold in thiosulfate solutions containing copper in the absence of ammonia has received little attention. It has been shown in this study involving electrochemical and leaching tests that copper ions catalyze not only the oxidation of thiosulfate but also the dissolution of gold in alkaline thiosulfate solutions. Electrochemical studies have shown that copper has a positive effect on the anodic dissolution of gold with increasing concentrations of copper resulting in higher dissolution rates of gold at a potential of 0.3V. Studies on the dissolution of gold powder in alkaline oxygenated thiosulfate solutions containing low concentrations of copper have shown that the role of copper in enhancing the dissolution rate of gold is possibly associated with the formation of a copper–thiosulfate–oxygen intermediate which is more reactive in terms of cathodic reduction than dissolved oxygen. The electrochemical experiments have been complemented by a leaching study which has shown that milling of gold powder in the presence of copper (added as ions, metal, or oxide) assists with the dissolution of gold in thiosulfate solutions.     

铜及其合金电解仿金着色工艺

详细介绍了一种铜及铜合金阴极还原着仿金色工艺及其配方。探讨了该工艺的着色原理、电流密度的影响及所得着色膜层的性能。结果表明，该工艺所得的膜层呈金黄色，结晶致密，耐蚀性好。     

化学镀镍复合配位剂的研究

采用对比试验和正交试验,以镀速、孔隙率、镀液稳定性和镀层硬度为评价指标,研究了单一配位剂及复合配位剂对镀液和镀层性能的影响,得到了复合配位剂的最优组合:8.4g/L乳酸,6g/L苹果酸,9g/L柠檬酸,8g/L丁二酸,1g/L丙酸。采用该复合配位剂的工艺配方可提高镀液使用寿命,获得性能优良的镀层。     

自含砷合碳难处理金矿中提取金的研究─Ⅰ.氨水脱砷-石灰加压氧化-氰化

针对甘肃省坪定金矿含金、砷高、金部分地赋存于脉石、脉石为碱性、属于难选难冶矿的特点，提出了氨水脱砷－石灰加压氧化－氰化新工艺．当原矿含金8．7g／t及13．0％砷时，砷可脱除95％，金可浸出85％．技术及经济指标预计均较满意．     

Initial Deposition of Colloidal Particles on a Rough Nanofiltration Membrane

The initial rate of colloid deposition onto semi‐permeable membranes is largely controlled by the coupled influence of permeation drag and particle‐membrane colloidal interactions. Recent studies show that the particle‐membrane interactions are subject to immense local variations due to the inherent morphological heterogeneity (roughness) of reverse osmosis (RO) and nanofiltration (NF) membranes. This experimental investigation reports the effect of membrane roughness on the initial deposition of polystyrene latex particles on a rough NF membrane during cross flow membrane filtration under different operating pressures and solution chemistries. Atomic force microscopy was used to characterize the roughness of the membrane and observe the structure of particle deposits. At the initial stages of fouling, the AFM images show that more particles preferentially accumulate near the “peaks” than in the “valleys” of the rough NF membrane surface.     

Promotional effect of hydroxyl on the aqueous phase oxidation of carbon monoxide and glycerol over supported Au catalysts

Gold particles supported on carbon and titania were explored as catalysts for oxidation of CO or glycerol by O₂ at room temperature in liquid-phase water. Although Au/carbon catalysts were not active for vapor phase CO oxidation at room temperature, a turnover frequency of 5 s⁻¹ could be achieved with comparable CO concentration in aqueous solution containing 1 M NaOH. The turnover frequency on Au/carbon was a strong function of pH, decreasing by about a factor of 50 when the pH decreased from 14 to 0.3. Evidently, a catalytic oxidation route that was not available in the vapor phase is enabled by operation in the liquid water at high pH. Since Au/titania is active for vapor phase CO oxidation, the role of water, and therefore hydroxyl concentration, is not as significant as that for Au/carbon. Hydrogen peroxide is also produced during CO oxidation over Au in liquid water and increasing the hydroxyl concentration enhances its formation rate. For glycerol oxidation to glyceric acid (C₃) and glycolic acid (C₂) with O₂ (1–10 atm) at 308–333 K over supported Au particles, high pH is required for catalysis to occur. Similar to CO oxidation in liquid water, H₂O₂ is also produced during glycerol oxidation at high pH. The formation of the C-C cleavage product glycolic acid is attributed to peroxide in the reaction.