焊接设备中计算机控制系统的抗干扰

本文分析提出焊接设备中影响计算机控制系统的几种主要干扰。结合实际工作,提出了解决的措施和方法。     

液态硅铁直接颗粒化的原理和方法

从理论上说明在一定条件下,液态硅铁合金自由出口处形成液滴的体积仅与液体的表面张力和出流孔直径有关。且当该体积液滴的重力和上部液体的内聚力相等时,液滴即可分离自由下落。据此理论进行了试验,结果表明,液态硅铁合金可直接进入冷却液中形成球状颗粒。且当出流孔径d=8mm,浇注温度为1420℃,落差H=150mm,油层/水层为700mm/1000mm时,76%的颗粒形状几乎都近于圆球形,颗粒体积与理论计算值最大偏差不超过10%。同时,这种液态硅铁合金直接颗粒化的方法与机械破碎法相比具有简易、快捷、节能、高效的优点。     

Preparation of nano-sized silicon carbide powder using thermal plasma

Nano-sized silicon carbide (SiC) powder was prepared by thermal plasma process using silicon tetrachloride (SiCl₄) and methane (CH₄). The synthesized powder was characterized by X-ray diffraction pattern, scanning electron microscopy, transmission electron microscopy, FT-IR spectroscopy and particle size analyzer. The powder was dominated by β-SiC including some of α-SiC and free carbon species. The quality of the powder was varied with process conditions such as the molar ratio of H/Si and C/Si, and collecting positions. It was known that the conversion to SiC was mainly affected by the addition of hydrogen gas because it promoted the decomposition and reduction of SiCL. CH₄ was easily decomposed to carbon species for the formation of SiC as well as removal of impure oxygen, but excessive carbon suppressed the formation of crystalline SiC and resulted in the solid carbon contamination. The optimum ratio of H/Si was approx. 26 and that of C/Si was 1.1. For collecting positions, the powder collected at the vessel and filter was preferable to that at the reaction tube. The average size of the powder synthesized was estimated to be below 100 nm and uniform in distribution.     

电厂电气运行中常见故障分析及其应对措施探讨

为了保证电厂的生产效率,必须要分析电气的运行特征,确定电气故障发生的原因,综合考虑多方面因素,选择切实可行的措施解决问题。简要分析了电厂电气运行常见故障发生原因,并提出了相应的解决措施。     

The voidage function and effective drag force for fluidized beds

Here, an experimental investigation on the effective drag force in a conventional fluidized bed is presented. Two beds of different particle size distribution belonging to group B and group B/D powders were fluidized in air in a diameter column. The drag force on a particle has been calculated based on the measurement of particle velocity and concentration during pulse gas tests, using twin-plane electrical capacitance tomography. The validity of the voidage function “correction function”, (1−ε_s)ⁿ, for the reliable estimation of the effective drag force has been investigated. The parameter n shows substantial dependence on the relative particle Reynolds number , and the spatial variation of the effective static and hydrodynamic forces. It is also illustrated that, a simple correlation for the effective drag coefficient as function of the particle Reynolds number (Re_p), expressed implicitly in terms of the interstitial gas velocity, can serve in estimating the effective drag force in a real fluidization process. Analysis shows that, the calculated drag force is comparable to the particle weight, which enables a better understanding of the particle dynamics, and the degree of spatial segregation in a multi-sized particle bed mixture. The analogy presented in this paper could be extended to obtain a generalized correlation for the effective drag coefficient in a fluidized bed in terms of Re_p and the particle physical properties.     

数据挖掘技术在学生评估中的应用

近几年随着科技和现代教育的发展,数据库和网络技术得到飞速的发展和广泛的应用,智能教学系统也就大量地出现,这样就有大量的数据伴随着出现,而怎样处理这些数据使人们从中获得有用的信息变成一个热门的话题。数据挖掘技术就是将大量数据以一定的方式进行处理,得到对人们有用的信息,来帮助人们学习和预测。将数据挖掘技术引入到教学过程中学生的个人学习素质评估当中,创新性地通过决策树算法和聚类算法相结合的方法对学生数据分析,挖掘潜在的信息资源,找出影响个人综合素质的关键因素及各因素之间的关系,总结优秀学生的个人综合素质的培养方法,弥补不足,提高学生的个人综合素质。     

线材轧制技术的新进展

介绍了ＤａｎｉｅｌｉＭｏｒｇａｒｄｓｈａｍｍａｒ公司与Ｍｏｒｇａｎ公司提供的线材生产的新设备、新技术。并对其做了分析比较，特别对实现无序轧制多品种生产进行了讨论，指出新型高效线材轧机、高速切头飞剪和相关技术的采用，将推进线材轧制技术的新进展。     

Accelerated electrospark deposition and the wear behavior of coatings

Electrospark deposition (ESD) is a coating process that is featured by low heat input to the substrate. Low coating efficiency and other limitations influence its wider application. The present paper introduces newly designed ESD equipment, by which a higher coating rate can be reached. The relationship among coating thickness, surface roughness, and process parameters such as pulse energy, pulse frequency, and deposition time are presented. Electrospark deposition coating by the new equipment on AISI 1045 steel (with WC-8% Co as electrode) increases the wear resistance by 5 to 8 times. The micromechanism is investigated by scanning electron microscopy observation.