连续体结构的参数化水平集统一优化

针对传统分步式结构优化设计的不足,提出一种同时进行结构拓扑、形状和尺寸统一优化的设计方法.首先采用水平集函数描述统一的结构优化模型和几何尺寸边界,通过引入紧支径向插值基函数将结构拓扑优化变量、形状优化变量和尺寸优化变量变换为基函数的扩展系数;然后取该扩展系数为设计变量,借助一种参数的变化表达3种优化要素对结构性能的影响,将复杂的多变量优化问题变换为相对简单的参数优化问题,有利于与相对成熟的优化算法相结合提高求解效率;进一步用R函数将其融合为一个整体,构造出统一优化模型,并用最优化准则法进行求解.最后通过数值案例证明了该方法的有效性和精确性.     

实施认可新准则加强实验室规范化管理

《检测和校准实验室能力认可准则》分为l5项管理要素和10项技术要素。作者结合实验室的实际工作,从认可准则管理要求中的组织、管理体系、文件控制、纠正措施、内部审核和管理评审等几个方面有效地推进了实验室质量管理体系的建设,促进实验室的规范化管理。     

建筑结构粘结剂的研究进展

在综合分析国内外文献的基础上,本文简述了粘结剂的发展历史,它在建筑业中的应用现状及在现代建筑业中的地位;研究了建筑结构粘结剂的主要性能指标,粘结剂连接的优点和主要技术检验指标等.此外,对目前广受关注的粘结剂耐久性研究的试验方法做了总结,列举了最新研究进展.在此基础上,指出了目前研究的不足,提出了对研究方向的建议.     

New CFD Validation Method with Application to Verify Computations of Near Wall Flows

For high Re number flows, a new computational fluid dynamics (CFD) validation method, namely, wall-surface compatibility criteria method and also called Gaos criteria, is proposed to verify near wall flows. As examples, Gaos criteria method and other two CFD verification methods (analytic solutions method and grid convergence analysis) are used to verify FLUENTs near wall flows solutions for two-dimensional incompressible laminar stagnation-point flows. The exact solution of the Navier-Stokes equations for laminar stagnation-point flows satisfy accurately all Gaos criteria, numerical simulations of laminar stagnation-point flows show that when physical parameters (the pressure coefficient and the Stanton number at wall surface) achieve convergence with more and more fine-screen grid, a part of Gaos criteria are not satisfied.     

一类非线性时滞偏差分方程的不饱和解

利用频密测度和无穷双序列{um,n}不饱和解的概念,讨论了一类带有可变号系数的非线性时滞偏差分方程解的不饱和性质,给出了偏差分方程解的频密振动性的几个充分条件.     

韧性断裂准则在板料成形中应用研究进展

对板料成形中的成形极限应力图、最大变薄率、成形极限图以及韧性断裂准则等预测成形极限的方法进行了综述和分析,提出了利用韧性断裂准则能够较好地预测塑性差的板料成形极限,而且还能考虑应变路径的变化.利用有限元方法模拟时,韧性断裂准则既可以运用到完全耦合的弹塑性损伤模型的增量方法中,也可以运用到一步有限元逆算法中.指出了为准确地预测成形极限,除了提高有限元模拟精度外,应找到一种本质地反映材料性能的准则.     

通用突变控制方法及其在潜艇中的应用

运用非线性动力学和突变理论,研究了高维系统建立具有理想特性突变的控制方法.引入冲失滤波器保证系统平衡点不变,并利用隐式判据、中心流形定理以及规范形法确定控制增益.以潜艇空间运动为例,阐述计算的全过程.该控制方法简便、快捷,可广泛应用到实际控制系统的设计中.     

Model test of the cutting properties of a shearer drum

According to similarity theory, we carded out a dimensional analysis of the shearer drum correlation parameters and built similarity criteria. Based on these, similarity models of shearer drums were developed. Simultaneously, based on an estab-lished cutting testbed of the coal and rock, cutting tests of different pick arrangements of the drum models were carried out, where the compressive strength of the analogous cutting material was 2.48 MPa and the drum rotary speed 67.5 r/min. The variance, the mean values, maxima and mean maxima of the torque load were analyzed for different type drum models. Moreover, the relation-ships between the type of pick arrangements and the cutting lump coal percentage were studied. The results indicate that the load fluctuation of the sequence drum is larger than that of the punnett square drum in the cutting process and the lump coal percentage and economic benefits of the sequence drum are inferior to the punnett square drum. We conclude that the punnett square drum is superior to the sequence drum.