FPGA的动力电池检测系统研究

为提高动力电池使用效率,提出了一种基于FPGA的动力电池检测系统的设计方案.采用AD转换芯片实现对电池电压、电流的采集,数字温度传感器对温度进行采集,再通过软件实现对数据的处理和实时显示.系统运行稳定,数据处理能力强,集成度高,易于扩展.     

基于OpenGL的二维电法数据三维可视化技术研究

结合目前电法勘探数据成图及二维解释的特点及存在的局限性,研究了OpenGL和VC＋＋2005联合编程,结合二维剖面数据特点,研制了基于OpenGL的电法数据三维可视化系统Geo3DVis。Geo3DVis的基本功能包括工区建立、二维解释、三维显示;实现了对二维剖面数据的动态放大、缩小、平移等交互操作。将Geo3DVis应用于实际二维物探数据资料解释,取得了良好的地质效果。     

金矿矿石可选性试验研究

对我国某金矿矿石进行浮选可行性试验研究,通过研究得到了精矿石粗选和精选的最佳工艺数据,为该矿山选厂设计提供了必要的浮选试验数据。     

西门子SIMOTION Delta 3D picker模型应用

本文主要介绍SIMOTION运动控制系统中Delta 3D picker功能的实际应用,阐述了Delta 3D机构的控制参数设定、原点设置、三种路径插补功能在运动轨迹控制中的应用。     

新型横向磁场电机的标量磁位三维磁场分析与参数计算

提出了一种新型横向磁场电机（TFM），定子采用E型铁心，可以大大降低加工难度和制造成本。但是，该电机磁路复杂，需采用三维场场进行分析。在三维有限元磁场中，如果对电流区域进行适当处理，采用标量磁位进行分析，与采用矢量磁位相比，可大大提高计算速度。对电流区域在三维磁场计算中的处理方法进行了推导，根据所推导的原理编制三维有限元软件，利用该软件对样机磁场进行计算。试验结果表明了该方法的正确性。     

Probe into Key Techniques of Regional-Oriented 3D GIS On the key techniques of 3D GIS used for regional Geological Information System

Regional Geological Information System combines the multi-dimensional and dynamic spatial information into an integrated spatial information system. 3D geological modeling and its preprocessing or post-processing are the most difficult problems for constructing the system. Based on the current 3D GIS technique, some basic problems in establishing the system are discussed in this paper, including 3D spatial data model, 3D geological modeling, and visualization of 3D geological data. A kind of 3D vector data model based on boundary representation for geological object and its topology was developed in order to model and visualize complex geological structures. In addition, some key techniques are pointed out for further study.     

Design feasibility study of a divertor component reinforced with fibrous metal matrix composite laminate

Fibrous metal matrix composites possess advanced mechanical properties compared to conventional alloys. It is expected that the application of these composites to a divertor component will enhance the structural reliability. A possible design concept would be a system consisting of tungsten armour, copper composite interlayer and copper heat sink where the composite interlayer is locally inserted into the highly stressed domain near the bond interface. For assessment of the design feasibility of the composite divertor concept, a non-linear multi-scale finite element analysis was performed. To this end, a micro-mechanics algorithm was implemented into a finite element code. A reactor-relevant heat flux load was assumed. Focus was placed on the evolution of stress state, plastic deformation and ductile damage on both macro- and microscopic scales. The structural response of the component and the micro-scale stress evolution of the composite laminate were investigated.     

A Comparative Study of High-Field Diamagnetic Fluctuations in Deoxygenated YBa2Cu3O7-x and Polycrystalline (Bi–Pb)2Sr2Ca2Cu3O10

We studied three single crystals of YBa₂Cu₃O_7-x, (Y123) with superconducting transition temperature, T_c=62.5, 52, and 41 K, and a highly textured polycrystalline specimen of (Bi–Pb)₂Sr₂Ca₂Cu₃O₁₀ (Bi2223), with T_c=108K. Isofield magnetization data were obtained as a function of temperature, with the magnetic field applied parallel to the c axis of each sample. The reversible magnetization data for all samples exhibited a rounded transition as magnetization tended toward zero. The reversible data were interpreted in terms of two-dimensional diamagnetic lowest-Landau-level (LLL) fluctuation theory. The LLL scaling analysis yielded consistent values of the superconducting transition temperatures T_c(H) for the various samples. The resulting scaling data were fit well by the two-dimensional LLL expression for magnetization obtained by Tesanovic and colaborators, producing reasonable values of κ but the fitting parameter ∂H_c2/∂T produced values that were larger than the experimentally determined ones. We performed simultaneous scaling of Y123 data and Bi2223, obtaining a single collapsed curve. The single curve was obtained after multiplying the x and y axis of each scaling curve by appropriate sample-dependent scaling factors. An expression for the two-dimensional x-axis LLL scaling was extracted from theory, allowing comparison of theoretical values of the x-axis scaling factors with the experimental values. The comparison between the values of the x-axis produced a deviation of 40% which suggests that the hypothesis of universality of the two-dimensional LLL fluctuations is not supported by the studied samples. We also observe that Y123 magnetization data for temperatures above T_c obbey a universal scaling obtained for the diamagnetic fluctuation magnetization from a theory considering non-local field effects. The same scaling was not obbeyed by the corresponding magnetization calculated from the two-dimensional LLL theory.     

Structure study on the thermoelectric materials CexCo4Sb12 (x = 0.5, 1.0) by neutron diffraction

In order to understand the relationship between crystal structure and thermoelectric properties, the neutron diffraction patterns of the thermoelectric materials with the nominal composition Ce_xCo₄Sb₁₂ (x = 0.5, 1.0) were measured at room temperature, the data were fitted by the Rietveld profile refinement method using the Fullprof2k program. It is found that the sample Ce_0.5Co₄Sb₁₂ is composed of two phases, its major phase is CoSb₃ with skutterudite-structure and the Ce atom is not incorporated into the lattice, the impurity is monoclinic CoSb₂. In the case of Ce_1.0Co₄Sb₁₂, the major phase is filled skutterudite, about 10% of the 2a site is occupied by Ce atom, the second phase is monoclinic CoSb₂.     

一种基于PC打印口设计的A/D转换器

描述了基于PC打印口设计的A／D转换器工作原理，着重介绍了实现A／D转换器的硬件电路以及软件编程．