硫化钠在黑白钨加温精选中的应用研究

介绍了柿竹园黑白钨混合粗精矿加温精选中 ,添加硫化钠与水玻璃混合剂比单一添加水玻璃能更有效地使白钨矿与萤石等含钙矿物及脉石矿物分离。论述了硫化钠在加温精选中的作用效果并探讨了其作用机理     

RF antenna analysis with the ICANT code

The ICANT code computes self-consistently the surface current distribution on a 3D antenna model radiating in a plasma or vacuum and has been used to analyze the coupling properties of various antenna models. In this work it is used to assess near-fields generated by different versions of the TCABR (Tokamak Chauffage Alfvén wave heating experiment in Brazil) antenna as well as coupling properties of the TEXTOR tokamak in Forshungszentrum Jülich. Two different strap models planned for the TCABR antenna are shown to be practically equivalent in terms of maximum electric field. Textor coupling calculations are close to experimental values.     

砂岩储集层微波加热产生微裂缝的机理及意义

微波加热无需介质传热,具有升温速度快、热惯性小、选择性加热、穿透力强、过程易于控制等优点,已被试验性地应用于石油开采中。但有关微波加热对储集层岩石微观结构影响的研究还很缺乏,限制了该项技术在油气开采领域的广泛应用。通过实验手段研究了微波加热前后砂岩岩样微观结构变化、微裂缝产生机理及特征。结果表明,砂岩在微波加热过程中容易产生微裂缝,且不同岩石的微波加热致裂机理不尽相同,主要包括:矿物失水收缩、颗粒粒间开裂和颗粒内部开裂,低渗透致密砂岩刚性颗粒的粒内开裂作用显著。微波加热产生的微裂缝具非定向特征,即使在应力的作用下有一部分裂缝会发生闭合,但仍有大量微裂缝可以起到增加渗透率的作用。井下微波加热的致裂作用有助于改善近井区域渗流能力,提高低渗透油气藏的开采效率。图4参15     

An automatic method for controlling the centre of gravity of a model

In many applications the location of the centre of gravity of a mechanical part is an important factor that a designer must consider. If it is not in a desired location, a part might not work properly, e.g. unbalanced force might be generated in a rotational part. After a part is modeled, its centre of gravity cannot be altered unless its external shape or internal mass distribution is changed. However, the external shape is usually constrained by other design considerations. In this paper, an algorithm is proposed for controlling the centre of gravity of a hollowed part. Using this algorithm, the location of the centre of gravity of a part is controlled by changing its internal mass distribution.     

体积-表面淬火中加热温度的自动控制

根据表面-体积淬火奥氏体规范的要求，分析了感应加热过程中温度控制的特点和方式，并介绍了采用红外线光导纤维测温和微机控温技术成功用于体积-表面淬火中透热温度的自动控制。     

Effect of heating-rate on failure temperature of pre-loaded brass H62

The response and failure of brass H62 specimens subjected to different levels of pre-loaded stresses and heating rates were investigated using a Gleeble-1500 thermal-mechanical material testing system. The metallographs of the tested material were also observed and analyzed. It is found that the increase of either pre-loaded stress or heating-rate decreases the failure temperature. Metallographic analysis shows that high heating-rate may cause stronger local thermal inconsistency （LTI） and remarkably increase the microdefects in the material, which may markedly degrade the macroscopic mechanical properties of the material.     

用离子束混合及快速热处理方法形成钽的硅化物

本文描述用离子束透过钽金属膜进行混合和快速热处理方法来形成钽的硅化物.用溅射方法在P型硅衬底上淀积一层金属钽,然后用砷离子束透过钽金属模进行混合,采用快速热处理后形成了平整的硅化钽薄层.使用厚度为500埃的钽金属膜,得到钽的硅化物薄层电阻为5.5Ω/□.研究了砷离子能量、剂量及钽膜厚度对钽的硅化物薄层电阻的影响.用透射电镜和台阶仪对所形成的硅化钽进行了分析和厚度测量.     

From hospital to municipal cogeneration systems: an Italian case study

A mixed integer linear programming model combined with a more traditional design by scenarios is proposed to optimize facilities size and operation mode of a municipal energy system involving significant civil centres and a hospital. Moving from the need of a new heat and power station for the local hospital due to the construction of new pavilions, the opportunity of involving other centres in the neighbourhood in a distributed cogeneration system is analysed, increasing system complexity step by step. Smaller cogeneration units tailored to hospital needs are rewarding ventures with relatively low risks but, in a country whose traditional power generation systems heavily rely on fossil fuels and where energy policy and market conditions can make it profitable to sell surplus power, district heating systems foster the installation of larger cogenerators and lead thereby to higher profits and to better performance as for primary energy savings and greenhouse gases emission reduction. Copyright © 2006 John Wiley & Sons, Ltd.     

相变换热技术在供暖系统中的开发前景

介绍相变换热原理、相变暖气片特点以及相变取暖系统的经济性,预示相变换热技术在取暧系统的开发前景。     

《燃气红外线辐射供暖系统设计选用及施工安装》国家标准图集介绍

介绍了该国家标准图集的主要内容：设计说明、典型设计、工程实例、系统设备、燃气管道安装、液化石油气气化站、电气控制及温度检测、施工安装说明。