两性离子共聚物P(AM-DMAPAAS)竞聚率的测定

在NaCl溶液中采用自由基聚合制备了同时含正负离子基团的磺基甜菜碱型两性离子共聚物P(AM-DMAPAAS),考察单体投料比与共聚物组成之间的关系,采用Fineman-Ross法和Kelen-Tudos法对2种共聚单体竞聚率进行了研究.结果表明,DMAPAAS和AM的竞聚率分别为0.30557和0.77667.     

A study on improvement of sodium cooled TRU burner design using burnable poison

A new design approach to improve safety characteristics of sodium cooled core for transuranic element transmutation is discussed. In the new option, some amount of fertile material is removed for reduction of sodium void reactivity. Simultaneously, a burnable absorber material is loaded in replacement of fertile material to compensate for reactivity drop during the fuel depletion. Two methods of burnable absorber loading are considered such as the homogeneous and the heterogeneous. In the results, it is found that the homogeneous loading cannot reduce the sodium void reactivity but makes the reactivity more positive. On the other hand, the heterogeneous loading can reduce the sodium void reactivity successfully. It is also found that the increment in burnup reactivity swing is negligible when the burnable poison is heterogeneously loaded. It is concluded that if the burnable poison material is loaded appropriately, the sodium void reactivity can be reduced without any significant penalty of increase in burnup reactivity swing.     

Development of the package-reactor (2) -core characteristics-

A new small reactor concept named the Package-Reactor has been jointly developed by Hitachi, Ltd. and Mitsubishi Heavy Industries, Ltd. The reactor technology was built from that of conventional LWRs. The reactor core consists of 12 cassettes containing fuel rods with a similar design to that of PWR fuel rods. Each cassette has about a 0.4 m outer diameter and they are fixed with about 0.5 m pitch to each other in the atmospheric pressure condition. A tube-type control cluster was developed. It can decrease the rise of reactivity for the one-rod-stuck condition. An advanced cassette design was studied in which the down-comer is placed at the center of the fuel region. This concept, which improves neutron economics and the cold shutdown margin, will increase the marketability of the Package-Reactor. An operation period of more than 8 years can be achieved with UO₂ fuel enrichment of 5.0wt%.     

秦山核电厂反应堆控制棒价值和硼价值测量试验

本文系统地介绍了秦山核电厂反应堆控制棒组价值和硼价值在首次物理启动中的测量试验。简要介绍了测量方法、仪器装置、试验经过、实测结果和误差分析。试验结果表明:测量值与理论计算值符合得很好,达到了验收准则的要求。     

Effect of Reactivity of Quick Lime on the Properties of Hydrated Lime Sorbent for SO_2 Removal

The hydration of quick lime and the sulfation of hydrated lime were carried out for verification of relationship between the reactivity of quick lime and the properties of hydrated lime as a sorbent. The effect of reactivity of quick lime was investigated with the change of calcination temperature and time. Results obtained showed that the temperature rise during the hydration of quick limes varied from 31 to 69℃ with the variation of calcination temperature and time. The specific surface area and the sulfa...     

线形和星形聚L-丙交酯大分子单体的合成

以辛酸亚锡为催化剂,分别以聚乙二醇、甲基丙烯酸羟乙酯、三羟甲基丙烷、季戊四醇、甘露醇和山梨醇等和L-丙交酯反应,得到末端为羟基的线形和星形聚L-丙交酯。通过和甲基丙烯酰氯反应,在上述线形和星形聚L-丙交酯成功引入双键,得到了相应的反应性大分子单体,其双键的存在经红外谱图和高锰酸钾试验得到证实。通过在过氧化二苯甲酰引发下的热交联,研究了上述大分子单体的反应性,发现端基数对交联产物的性质有一定影响。溶解试验、凝胶含量测定和热重分析表明,端基数目较多的大分子单体的交联产物有较高的凝胶含量,交联密度较大,热性能较好。     

Ceramic wastes as alternative raw materials for Portland cement clinker production

The cement industry has for some time been seeking procedures that would effectively reduce the high energy and environmental costs of cement manufacture. One such procedure is the use of alternative materials as partial replacements for fuel, raw materials or even clinker. The present study explores the reactivity and burnability of cement raw mixes containing fired red or white ceramic wall tile wastes and combinations of the two as alternative raw materials.The results showed that the new raw mixes containing this kind of waste to be technically viable, and to have higher reactivity and burnability than a conventional mix, providing that the particle size of the waste used is lower than 90 μm. The mineralogical composition and distribution in the experimental clinker prepared were comparable to the properties of the clinker manufactured with conventional raw materials. Due to the presence of oxides such as ZnO, ZrO₂ and B₂O₃ in tile glazing, the content of these oxides was higher in clinker made with such waste. The mix of red and white ceramic wall tile waste was found to perform equally or better than each type of waste separately, a promising indication that separation of the two would be unnecessary for the purpose described above.     

POLYMERIZATION OF BUTADIENE IN TOLUENE WITH NICKEL(II) STEARATE-DIETHYL ALUMINUM CHLORIDE CATALYST

A bench-scale batch reactor was used to study the polymerization of butadiene with nickel(II) stearate Et₂AlCl catalyst. In particular, the effects of moisture on polymerization were investigated. The initiation reaction is sensitive to temperature. At 0°C an induction period was observed, but at room temperature initiation can be assumed instantaneous. Water enhances catalytic reactivity, however at water concentrations greater than 10 mmol/L, termination reactions become significant. Maximum conversion is obtained in the 6 to 15 mmol/L range of water. The determining step for the molecular weight of polymer is the chain transfer to monomer. At low H₂O concentration the molecular weight increases with water concentration, however it becomes independent of water concentration at high moisture content. With the help of statistical analysis of the experimental data, a two-active-species model was developed to describe the kinetics of the system and to explain certain polymerization characteristics.     

中国先进研究堆全堆芯扩散计算

基于物理启动、同位素生产以及空间燃耗不同考虑的全堆芯模型,采用少群扩散方法对中国先进研究堆(CARR)堆芯进行计算。通过对选定的换料方案进行堆芯第1～3炉的临界计算,得到了各炉初/末期的反应性、中子注量率以及功率分布。并且采用隐式燃耗方法模拟了CARR堆芯燃耗过程,得到了堆芯燃耗分布,分析了堆运行过程中产生的裂变产物份额并给出了中毒反应性效应。确定了CARR的基本物理特性参数,完成了CARR物理详细设计工作,为CARR最终安全分析报告的编写以及将来的运行提供必要的数据。