太阳能溴化锂吸收式制冷系统吸收特性的研究

太阳能溴化锂吸收式制冷系统的吸收器采用传热、传质分离装置,利用预冷器预先冷却和喷淋吸收的方法完成对传热、传质的分离。通过建立吸收器的计算模型,分析冷冻水出口温度、冷却水进口温度、热水温度、喷淋温度、喷淋密度等因素对传热、传质的影响。利用传热、传质分离方法,使系统的吸收特性得到强化,从而使系统获得较高的性能系数。     

泡沫塑料表面的磁控溅射镀膜技术研究

对硬质聚氨酯泡沫塑料进行适当的前处理(涂刮不饱和聚酯腻子和喷涂双组份聚氨酯清漆),再采用磁控溅射镀膜技术对其进行紫铜T2镀膜,能够有效地降低泡沫塑料的吸水率,提高尺寸稳定性.     

第62届世界铸造会议宣读论文综述(有色金属部分)

详细介绍了第 62届世界铸造会议中有关有色合金铸造的 6篇宣读论文。“铝合金压铸的压力传递与铸件质量的关系”一文提出一种新的测量铝合金压铸型腔中压力传递的方法 ,搞清了压力传递、流速与铸件质量之间的关系 ,获得了本届会议的优秀论文奖。“挤压压铸和半固态铸造生产高质量、复杂的铸件”一文展示了应用压铸高技术 ,生产出力学性能极高的汽车用复杂压铸件。“监控金属型、压铸模温度的智能系统”一文提出的智能控温系统 ,测温可靠 ,能自动控制铸型温度 ,铸型中不需开冷却水孔道。“制造金属基复合材料的复合铸造工艺 (Hybrid)”一文介绍了一种挤压铸造和熔模铸造相结合生产金属基复合材料的新工艺。“喷铸法制取铝基SiCp增强复合材料的微观组织和磨耗特性”一文指出用喷铸法制取的铝基SiCp增强复合材料 ,具有很高的耐磨性能。“不同凝固条件下 ,Na ,Ca含量对加Sb变质的 3 5 6合金力学性能的影响”一文的作者通过大量试验 ,搞清了Na ,Ca的有害作用 ,指出 3 5 6合金的σb 与δ之间存在下列关系 :σb(MPa) =2 5 .87lgδ( % ) 12 8.85。     

Performance comparison of reduced models for leak detection in water distribution networks

This paper presents a methodology for comparing the performance of model-reduction strategies to be used with a diagnostic methodology for leak detection in water distribution networks. The goal is to find reduction strategies that are suitable for error-domain model falsification, a model based data interpretation methodology. Twelve reduction strategies are derived from five strategy categories. Categories differ according to the manner in which nodes are selected for deletion. A node is selected for deletion according to: (1) the diameter of the pipes; (2) the number of pipes linked to a node; (3) the angle of the pipes in the case of two-pipe nodes; (4) the distribution of the water demand; and, (5) a pair-wise combination of some categories.The methodology is illustrated using part of a real network. Performance is evaluated first by judging the equivalency of the reduced network with the initial network (before the application of any reduction procedure) and secondly, by assessing the compatibility with the diagnostic methodology. The results show that for each reduction strategy the equivalency of networks is verified. Computational time can be reduced to less than 20% of the non-reduced network in the best case. Results of diagnostic performance show that the performance decreases when using reduced networks. The reduction strategy with the best diagnostic performance is that based on the angle of two-pipe nodes, with an angle threshold of 165°. In addition, the sensitivity of the performance of the reduced networks to variation in leak intensity is evaluated. Results show that the reduction strategies where the number of nodes is significantly reduced are the most sensitive.Finally this paper describes a Pareto analysis that is used to select the reduction strategy that is a good compromise between reduction of computational time and performance of the diagnosis. In this context, the extension strategy is the most attractive.     

智能化锅炉水冷壁清焦检测机具

电厂锅炉水冷壁清焦检测工作一直是个难题,目前国内外尚无更好的解决办法。多功能金属表面清焦检测机具为电厂锅炉水冷壁的清焦检测工作提供了智能化手段,使水冷壁的检测清焦自动化,较好地解决了这一难题。另外,它亦可广泛应用于船体检测、储油气罐及给排水、油管道的检测、疏通堵塞等领域。     

On the rate of heterogeneous catalytic reactions with ionic intermediates

A facile way to compute the rate law of a catalytic reaction with ionic intermediates is proposed, based on the theory of complex reactions. When the ionic nature of intermediates is taken into account it is necessary to add balance equations which correspond to the electroneutrality of the catalyst. Several mechanisms of the olefin hydrogenation were considered as examples.     

坚持科学发展观 开拓创新求发展

论述了贯彻落实科学发展观对水利水电工作必要性,以及如何在实际工作中坚持科学发展观,并从赣州市水利电力勘测设计研究院50年来在服务水利、改革发展、创新理念、人才队伍建设等方面取得的成就加以说明.     

Effect of varying levels of mental workload on startle eyeblink modulation

Previous research using punctuate reaction time and counting tasks has found that the startle eyeblink reflex is sensitive to attentional demands. The present experiment explored whether startle eyeblink is also modulated during a complex continuous task and is sensitive to different levels of mental workload. Participants (N = 14) performed a visual horizontal tracking task either alone (single-task condition) or in combination with a visual gauge monitoring task (multiple-task condition) for three minutes. On some task trials, the startle eyeblink reflex was elicited by a noise burst. Results showed that startle eyeblink was attenuated during both tasks and that the attenuation was greater during the multiple-task condition than during the single-task condition. Subjective ratings, endogenous eyeblink rate, heart period, and heart period variability provided convergent validity of the workload manipulations. The findings suggest that the startle eyeblink is sensitive to the workload demands associated with a continuous visual task. The application of startle eyeblink modulation as a workload metric and the possibility that it may be diagnostic of workload demands in different stimulus modalities is discussed.     

Dynamics of polymer electrolyte fuel cells undergoing load changes

Numerical simulations are carried out for a single-channel polymer electrolyte fuel cell (PEFC) undergoing a step increase in current density. The objective is to elucidate profound interactions between the cell voltage response and water transport dynamics occurring in a low-humidity PEFC where the membrane hydration and hence resistance hinges upon the product water. Detailed results are presented to show that a step increase in the current density leads to anode dryout due to electroosmotic drag, while it takes several seconds for water back-diffusion and anode humidified gas to re-wet the anode side of the polymer membrane. The water redistribution process is controlled by water production, membrane hydration, electroosmotic drag, and water diffusion in the membrane. The anode dryout results in a substantial drop in cell voltage and hence temporary power loss. Under extreme situations such as dry anode feed, large step increase in the current density, and/or lower temperatures, the cell voltage may even reverse, resulting in not only power loss but also cell degradation. Finally, the dynamics of current distribution after a step change in gas humidification is numerically examined.     

Photocatalytic degradation of a phenylurea, chlortoluron, in water using an industrial titanium dioxide coated media

The degradation of an herbicide, chlortoluron, by UV/TiO₂ photocatalysis in water using industrial titanium dioxide coated non-woven paper was studied. The influence of parameters such as adsorption capacity, initial concentration and TiO₂ implementation (coated or in suspension) was investigated. The results emphasize the importance of operational conditions and reactor geometry on the kinetic degradation rate. The analysis of the first organic by-products suggests that a hydroxyl radical attack occurs on the phenyl ring and methyl groups of the chlortoluron before the opening of the aromatic ring. The fate of hetero-atoms has been investigated. The fates of the two nitrogen atoms in the molecule are different, not only did it depend on their initial oxidation degree, as both had the same oxidation degree, but also on the initial oxidation state of neighboring carbons. The chlorine atoms were completely released as chloride ions. The study of the influence of the oxygen concentration showed the importance of the oxygen mass transfer when designing an industrial photocatalytic reactor. An original calculation process was carried out to evaluate the adsorption constant of oxygen over the whole photocatalysis period and not only in the initial conditions as previously provided. This work points out the necessity of extending the understanding of the efficiency of chlortoluron removal or of the removal of various complex pesticide mixtures found in agricultural wastewater, using alternative, more industrially realistic, reactors.