军用滑木箱的设计分析

介绍了按日本标准设计的横板式和国内竖板式军用滑木箱的结构设计参数，从木箱抗弯、抗静压及顶盖抗弯三方面对比了两种木箱的力学性能，分析了两种木箱的特点及适用范围。     

矩形件排样的一种优化算法

排样问题是一种总体资源分配问题，这里根据矩形件排样的工艺要求，提出了矩形件排样的一种近似算法，将一块板材分成三部分，每部分排一种零件，使得减料方便，提高了劳动生产率。     

柳钢100t转炉冶炼工艺优化实践

通过分析100t转炉冶炼工艺中存在的问题，对冶炼工艺进行优化，提高转炉过程控制能力和一倒炉命中率，结果表明：过程喷溅可降低至9％，冶炼终点命中率提高到63％ 以上。[第一段]     

工业建筑中钢结构的设计

钢结构已广泛应用于工业建筑中 ,本文叙述了工业建筑中钢结构的设计     

一种新型微带光子带隙结构的优化设计

本文对一种渐变尺寸的新型光子带隙结构进行了优化设计。根据优化后得出的最优结构参数 ,设计出PBG结构。实验结果证明 ,这种优化后的新型结构可以在保持阻带抑制幅度的同时减小通带内的波纹     

低温聚合物结构松弛的数值研究

为了获得低温聚合物的参数和升降温速率对连续升降温无量纲比热容的影响,应用差示扫描量热法(DSC)和TNM的结构松弛模型作出简单的数值研究.结果表明,变换不同比率的升降温速率及不同参数值得到的DSC曲线图形变化能够对聚合物的结构松弛研究有一点参考作用.     

Sensitivity of generation reserve requirements in deregulated power systems

Since demand for power exhibits great variability the amount of firm energy to be purchased to meet real time demand based on forecasts is usually different from the realized demand for that period. The role of generation reserves is to meet the real time fluctuations of power demand. The predictable part of the demand is met through purchases of firm energy. In this paper a model is presented to determine optimal quantities of firm energy and generation reserves to meet random demands. The model is then parameterized introducing a set of factors to perform a sensitivity study. A full factorial experiment is designed to study the impact of five factors on the response variable (i.e., proportion of generation reserves on the total purchased quantity). An example consisting of 640 simulations corresponding to 2⁵ treatment combinations evaluated over 20 randomly generated mean demands is used to identify significant factors on the response variable. Results from the experiment suggest that generation reserve requirements should be adjusted considering changes in significant factors and in the mean demand over the dispatch interval.     

Investigation of structural properties of ITO thin films deposited on different substrates

The influence of the substrate nature on the structure and morphology of ITO thin films grown by thermal evaporation in vacuum is investigated. The as-prepared metal films with Sn/In molar ratio of 0.1 were subsequently annealed for 2 h at 723 K in air (to obtain tin doped indium oxide), then annealed in vacuum at 523 K, followed by UV irradiation (to reduce the electrical resistivity). Irrespective of substrate nature, XRD data evidence a (222) preferential orientation in films. Substrate nature, annealing in vacuum and UV irradiation influence the structure, morphology, optical, electrical and surface wetting properties of the films' surface.     

ZJ510L-B汽车用高强度热轧板的试制

珠钢150t电弧炉-LF(VD)-CSP(紧凑式带材生产)流程试生产的5～8mm ZJ510L-B(0．16C--1．22Mn)汽车用高强度热轧板的铁素体晶粒尺寸为6．0～9．2μm，带状组织为1．5～2．5级，强度极限σb562～610MPa，延伸率δ5 32．0％～38．6％。文中还分析和提出了带状组织的形成原因和改进措施。