(Ti,M)C复式碳化物制备方法的研究进展

对当前(Ti,M)C碳化物的制备方法进行了综述,详细介绍了不同制备方法的制备过程及原理,对不同制备方法的优缺点进行了论述。碳热还原法是目前广泛使用的一种方法,能够制备复杂成分的(Ti,M)C,但该方法耗能大、工艺流程复杂;预合金化法能够制备某些特定成分的碳化物,但其使用范围受限;自蔓延高温合成法可以制备多种成分的(Ti,M)C,但大部分情况下需要预热且存在反应不完全的情况。目前没有一种制备方法同时具有高效、工艺流程简单、适用性强且产物纯度高等优点,对现有制备方法进行改进以满足工业化应用是(Ti,M)C复式碳化物的研究发展方向。     

Small-Scale Testing of In-Core Fast Reactor Materials

Part of the Fuel Cycle R&D (FCRD) initiative in the USA is to investigate materials for high dose application. While mechanical testing on large samples delivers direct engineering data, these types of tests are only possible if enough sample material and required hot cell capabilities are available. Smallscale materials testing methods in addition to large-scale materials testing allows insight on the same specimen and direct probing into areas of interest which are not accessible otherwise. In order to establish an empirical and research-based relationship between small-scale and large-scale materials testing, several different mechanical testing techniques were conducted on the same specimen irradiated in the Swiss spallation source irradiation program (STIP) at the Swiss spallation source (SINQ) at the Paul Scherrer Institute (PSI) up to a dose of 19 dpa. It is shown that the yield strength measured by tensile testing, microcompression testing and microhardness testing all show the same trend. In addition, focused ion beam (FIB)-based techniques also are used to produce local electrode atom probe (LEAP) samples. This procedure allows cutting samples of such a small size that no radioactivity on the prepared sample can be measured.     

New method to prepare iron particles with different morphologies: a way to get high green strength metal compacts

Abstract

Metaliron powders of well controlled size and morphology were synthesised by thermal decomposition under hydrogen of precipitated ferrous oxalates. Green compacts were prepared by uniaxial pressing of metal powders at 290 MPa. The bending green strengths of compacts were measured.

The precipitation of β-FeC₂O₄.2H₂O oxalate from ammonium oxalate gives rise to the formation of spherical particles by aggregation ofelongated grains. Thermal decomposition of this oxalate from 400 to 500°C under hydrogen permits metal iron particles with a rough surface to be obtained. Decomposition occurring above 500°C induces a smoothness of the particle surface. Metal particles synthesised at 500°C show both surface roughness and micrometer sized primary grains.This specific microstructure has allowed the highest value ofcompact green strength (31·7 MPa) to be obtained.

Acicular shaping of the β-FeC₂O₄.2H₂O particles precipitated from oxalic acid involves, after decomposition, an increase in the surface roughness and shape irregularity of the metal particles, owing to an entanglement of the elementary grains. An exceptional value (about 60 MPa) for the metal compact green strength was thus obtained for this type of powder.     

Concentration of Antifouling Biocides and Metals in Sediment Core Samples in the Northern Part of Hiroshima Bay

Accumulation of Ot alternative antifoulants in sediment is the focus of this research. Much research had been done on surface sediment, but in this report, the accumulation in the sediment core was studied. The Ot alternative antifoulants, Diuron, Sea-Nine211, and Irgarol 1051, and the latter’s degradation product, M1, were investigated in five samples from the northern part of Hiroshima Bay. Ot compounds (tributyltin (TBT) and triphenyltin (TPT)) were also investigated for comparison. In addition, metal (Pb, Cu, Zn, Fe and Mn) levels and chronology were measured to better understand what happens after accumulation on the sea floor. It was discovered that Ot alternative antifoulant accumulation characteristics in sediment were like Ot compounds, with the concentration in the sediment core being much higher than surface sediment. The concentration in sediment seems to have been affected by the regulation of Ot compounds in 1990, due to the concentration of Ot alternative antifoulants and Ot compounds at the survey point in front of the dock, showing an increase from almost the same layer after the regulation.     

Survey of aflatoxin M1 in milk and dairy products consumed in Burdur,Turkey

The aim of this study was to investigate the occurrence of aflatoxin M₁ (AFM₁) in dairy product samples in Burdur city. A total of 315 samples of dairy products were collected during 2008. Of the 315 samples analysed, AFM₁ in 246 samples (78.1%) was found to range from 5.5 to 800 ng/kg. In addition, AFM₁ levels of 16 raw milk, two pasteurised milk, only one milk powder and three white cheese samples were above the Turkish Food Codex. It is concluded that the occurrence of AFM₁ in dairy products may be considered as a possible hazard for public health.     

Fermentation of table cream by Lactobacillus plantarum strains: effect on fungal growth,aflatoxin M1 and ochratoxin A

Aflatoxin M1 (AFM₁) and ochratoxin A (OTA) are two main mycotoxins in milk and dairy products. In the present work, the ability of four Lactobacillus strains (L. plantarum PTCC 1058, L. plantarum LP3, L. plantarum AF1 and L. plantarum LU5) to remove AFM1 and OTA in fermented cream was studied during 24 h fermentation. The antifungal activity of the mentioned lactobacilli against the defined fungi (Aspergillus flavus PTCC 5004, Aspergillus parasiticus PTCC 5018, Aspergillus nidulans PTCC 5014, Aspergillus ochraceus PTCC 5060) was also evaluated. The results showed that the cell counts of all strains were increased by 64–70% during fermentation. All Lactobacillus strains decreased the amount of AFM₁ significantly (P ≤ 0.05) in the range of 26–52%, which the highest AFM₁-reducing effect was related to L. plantarum LU5 (from 0.5 to 0.24 μg kg⁻¹). The mean OTA removal by Lactobacillus strains in fermented cream also ranged from 32 to 58%. Amongst Lactobacillus strains, the cell-free culture supernatants of L. plantarum LU5 showed the highest (inhibition zone of 26.7 ± 1.2 mm) and L. plantarum LP3 and L. plantarum PTCC 1058 the lowest antifungal activities. The fermented creams contained Lactobacillus strains exhibited the highest and lowest antifungal activities against A. ochraceus and A. parasiticus, respectively. L. plantarum LU5, with the inhibition zone of 27.6 ± 0.9 mm, was the most effective fungal inhibitor, while L. plantarum PTCC 1058 had the lowest antifungal activity.     

The analysis for morphological evolution and crystallography of degenerate pearlite in 100Mn13 steel

During approximate 773 K aging treatment of 100Mn13 steel, degenerate pearlite will occur and evolve into lamellar pearlite during growth process. The microstructures of degenerate pearlite and its evolutionary lamellar pearlite are observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that after 748 K, 773 K and 798 K aging, degenerate pearlites occur at grain boundary. At growth front of degenerate pearlite forming at 773 K and 798 K, pearlite presents a morphology of short lamellae of carbide and ferrite, indicating a trend of developing into lamellar pearlite. The higher the temperature is, the more obvious the trend is, and even a conventional lamellar pearlite has developed. However, there is no morphological evolution for degenerate pearlite forming at 748 K aging. Besides, the constituents of degenerate pearlite is identified as M₂₃C₆ and ferrite, and Kurdjumov-Sachs orientation relationship exists between them, (01 )_α//( 1 )_M23C6, [111]_α//[110]_M23C6. This orientation relationship maintains in morphological evolution from degenerate pearlite to lamellar pearlite.     

Acetaminophen-Induced Rat Hepatotoxicity Based on M1/M2-Macrophage Polarization,in Possible Relation to Damage-Associated Molecular Patterns and Autophagy

Overdose of acetaminophen (APAP), an antipyretic drug, is an important cause of liver injury. However, the mechanism in the rat model remains undetermined. We analyzed APAP-induced hepatotoxicity using rats based on M1/M2-macrophage functions in relation to damage-associated molecular patterns (DAMPs) and autophagy. Liver samples from six-week-old rats injected with APAP (1000 mg/kg BW, ip, once) after 15 h fasting were collected at hour 10, and on days 1, 2, 3, and 5. Liver lesions consisting of coagulation necrosis and inflammation were seen in the affected centrilobular area on days 1 and 2, and then, recovered with reparative fibrosis by day 5. Liver exudative enzymes increased transiently on day 1. CD68⁺ M1-macrophages increased significantly on days 1 and 2 with increased mRNAs of M1-related cytokines such as IFN-γ and TNF-α, whereas CD163⁺ M2-macrophages appeared later on days 2 and 3. Macrophages reacting to MHC class II and Iba1 showed M1-type polarization, and CD204⁺ macrophages tended to be polarized toward M2-type. At hour 10, interestingly, HMGB1 (representative DAMPs) and its related signals, TLR-9 and MyD88, as well as LC3B⁺ autophagosomes began to increase. Collectively, the pathogenesis of rat APAP hepatotoxicity, which is the first, detailed report for a rat model, might be influenced by macrophage functions of M1 type for tissue injury/inflammation and M2-type for anti-inflammatory/fibrosis; particularly, M1-type may function in relation to DAMPs and autophagy. Understanding the interplayed mechanisms would provide new insight into hepato-pathogenesis and contribute to the possible development of therapeutic strategies.     

Decadal variability of wave power production in the North-East Atlantic and North Sea for the M4 machine

We look at the variability of the power produced by the three-float M4 wave energy converter for locations in the North-East Atlantic and North Sea using the NORA10 hindcast data from 1958−2011. The aim is to investigate whether the produced power is also strongly affected by the climate variability (such as the North Atlantic Oscillations) in the winter, just as the ocean wave power resource as observed in previous studies. In this study, we demonstrate the use of proxy indices in combination with the climate indices to reconstruct a historic practical wave power climate from 1665−2005. We also conduct sensitivity studies to assess the changes in the practical wave power variability in response to perturbing the machine size, the power take-off coefficient, the response bandwidth and the power limit of the power take off. We find that the resultant temporal variation is still dominated by the climate variability. However, the overall variability important for power availability and energy supply economics is smaller than that of the ocean wave power resource because of the finite capture bandwidth of the M4 machine. The statistical methodology presented here is also potentially relevant to other wave energy converters in similar locations.