Heat transfer in YBaCuO thin film/sapphire substrate system

The thermal boundary resistance at the YBaCuO thin film/Al₂O₃ substrate interface was investigated. The transparency for thermal phonons incident on the interface as well as for phonons moving from the substrate was determined. We have measured a transient voltage response of current-biased films to continuously modulated radiation. The observed knee in the modulation frequency dependence of the response reflects the crossover from the diffusion regime to the contact resistance regime of the heat transfer across the interface. The values of transparency were independently deduced both from the phonon escape time and from the time of phonon return to the film which were identified with peculiarities in the frequency dependence. The results are much more consistent with the acoustic mismatch theory than the diffuse mismatch model.We are grateful to A. Elantev for helpful discussion. We acknowledge the financial support of the Russian Scientific Council on the HTS problem (Project No. 90462).     

强激光热斑形成及其稳定性研究

在论述热点跟踪及其传热机理时将靶材的比热溶、热传导系、在激光的热藕合系数均考虑成温度和时间的函数，又考虑靶材在运动时将激光辐照物体时热点的建立及其稳定情况作一动态数值模拟，为热点跟踪作准备。     

掺镉纳米SnO2的热稳定性,电导及气敏性能

本文研究了ＣｄＯ掺杂对纳米ＳｎＯ２粉料的热稳定性，电导及气敏特性的影响。结果表明，以非晶状态均匀分散在ＳｎＯ２颗粒表面的ＣｄＯ能阻止ＳｎＯ２之间的相互扩散，提高了纳米ＳｎＯ２的热稳定性；固溶于ＳｎＯ２昌粒中的ＣｄＯ量（Ｃｄ／Ｓｎ〈０．０５）很小，但对元件的电导影响显著；纳米级的晶粒尺寸（〈６ｎｍ）及ＣｄＯ的掺杂大大改善了ＳｎＯ２的气敏特性。     

厚度伸缩压电陶瓷振子

对厚度伸缩压电陶瓷振子的振动状态进行了分析,并得到其等效电路.推导了振子的谐振频率、反谐振频率以及等效电路参数与振子尺寸、振子材料的介电、压电、弹性常数间的关系式.最后讨论了振子的一些特性和制作.     

基于像素拓展的图形分割与合成的方法研究

提出了一种新的图像分割与合成方法。对于图像的分割,提出了新的分割算法,先是手工将一些明显属于物体和明显属于背景的像素分割出来,然后创建一个小矩形区域进行像素拓展迭代,迭代到图像边界为止。对于图像的合成,采用平均法,设计了新的算法,使物体的基本颜色保持不变的同时,降低了合成图像中从源图像分割的物体与新背景的差异,并使得其饱和度、色度、强度更加自然真实。     

膨胀弯管在管道柔性设计中的定性分析

为防止管道因热胀冷缩、管道支撑或端点附加位移造成的应力问题,对管线中设置的膨胀弯管进行定性分析.通过2个参数的变化对膨胀弯管进行编号得到多种设计方案,用ANSYS建立管道的有限元模型,并分析各方案中膨胀管道的变形、应力和弯矩等;根据分析结果对膨胀弯管设计半径、设置位置和形状进行定性分析.该定性分析结果可为膨胀弯管概念设计和管道柔性设计提供参考.     

Hybrid function projective synchronization of chaotic systems with uncertain time-varying parameters via Fourier series expansion

In this paper, the hybrid function projective synchronization (HFPS) of different chaotic systems with uncertain periodically time-varying parameters is carried out by Fourier series expansion and adaptive bounding technique. Fourier series expansion is used to deal with uncertain periodically time-varying parameters. Adaptive bounding technique is used to compensate the bound of truncation errors. Using the Lyapunov stability theory, an adaptive control law and six parameter updating laws are constructed to make the states of two different chaotic systems asymptotically synchronized. The control strategy does not need to know the parameters thoroughly if the time-varying parameters are periodical functions. Finally, in order to verify the effectiveness of the proposed scheme, the HFPS between Lorenz system and Chen system is completed successfully by using this scheme.     

Thermal expansion of molybdenum in the range 1500–2800 K by a transient interferometric technique

The linear thermal expansion of molybdenum has been measured in the temperature range 1500–2800 K by means of a transient (subsecond) interferometric technique. The molybdenum selected for these measurements was the Standard Reference Material SRM 781 (a high-temperature enthalpy and heat capacity standard). The results are expressed by the relation where T is in K and l ₀ is the specimen length at 20°C. The maximum error in the reported values of thermal expansion is estimated to be about 1% at 2000 K and not more than 2% at 2800 K.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

Thermal expansion of Pyros from 20 to 1273 K

Pyros, which is a Ni-base alloy (82% Ni, 8% Cr, 4% W, 3% Mn, and 3% Fe), has been used extensively in France since 1926 as a temperature sensor and as a reference material for thermal expansion measurements. In this paper we present recent data on the expansion and expansivity of Pyros from 20 to 1273 K. Expansivity results, obtained by taking the derivative of a cubic-spline polynomial fitting performed to the L/L experimental data, show that Pyros is a stable material in the 20 to 1273 K temperature range. Furthermore, since the expansivity values are similar to those of steels, Pyros should be of special interest to laboratories which are concerned with expansion measurements on steels. Therefore, we suggest that Pyros be considered as a suitable reference material for thermal expansion measurements on steels, and until more accurate results are obtained, we propose our results as reference data between 20 and 1273 K.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

逆向工程中带孔洞的曲面对象三角剖分法研究

在分析现有的一些三角剖分方法的基础上，提出一种新的基于边界扩展的3D三角剖分方法，该方法首先采用一种空间栅格装点法来进行初始点云数据精简；再构造种子三角形，通过连接已剖分网格区域的边界边与最优扩展点来形成三角形网格从而向外扩展。该法可以对带有内孔等其他非凸壳的复杂曲面对象点云直接进行三角剖分，无需人工分区。实际应用表明采用该法可以快速、有效地从三维数据点集建立几何模型。