高频超声波在氧化皮中传播性能标定

对高频超声小在12Cr2MoWVTiB(G102钢）和12Cr1MoV钢钢管运行所产生氧化皮中的传播速度进行了定量标定，并对标定误差进行了统计计算，结果表明，12Cr1MoV钢氧化皮测厚标定点最大偶然误差值为0．050mm,G102钢为0．030mm，并指明了误差来源。     

工业建筑中钢结构的设计

钢结构已广泛应用于工业建筑中 ,本文叙述了工业建筑中钢结构的设计     

硫脲树脂对Cu~(2+)吸附性能研究

考察了不同吸附时间、pH值和吸附温度下,聚对苯甲酰基硫脲树脂和聚酯基硫脲树脂对Cu2+的吸附性能影响;并对吸附动力学和热力学进行了研究。     

Preparation of ultra-fine copper powder and its lead-free conductive thick film

In this paper, non-agglomerated monodispersed ultra-fine copper metallic powders have been synthesized with chemical reduction method. Fine lead-free glass powders were also prepared by solid synthesis process. Thick film paste prepared by above-mentioned copper metallic powders and lead-free glass powders was applied as conductive paste of MLCC. Mixture of glass and zinc oxide give the thick film a high adhesion strength which is attributed to the rough interface from interfacial reaction between glass and chip, and a good densification. Diffusion of metal between copper thick film and nickel thick film is clear. Ni-Cu solid solution appears under high temperature firing.     

Correlation between quasi-static and dynamic crack resistance curves

The correlation between the crack resistance measured from dynamic and quasi-static J-R tests has been investigated based on test data from instrumented Charpy impact tests and quasi-static single edge notched bend (SENB) J-R tests.The method originally proposed by Aurich et al. [Analyse und Weiterentwicklung Bruchmechanischer versagenskonzepte--Lokales Risswachstum, Ermittlung des Risswiderstandsverhaltens aus der Kerbslagarbeit. BAM Forschungsbericht 192, Berlin 1993, ISBN 3-89429-329-2], to develop a correlation coefficient between the net fracture resistance of Charpy V-notch (ISO) and quasi-static compact tension tests, was extended to establish correlations between so-called ductile-brittle transition fracture resistance curves obtained from instrumented Charpy V-notched (ISO) and fatigue precracked impact tests and quasi-static SENB J-R fracture resistance tests.The correlation between the dynamic and quasi-static crack resistance with regard to practical application to fracture assessments appears to be reasonably consistent, bearing in mind the inherent scatter in crack resistance data in general. The findings of the present research project from testing of ship grade NVE 36 and pressure vessel steel to ASTM A516 Gr. 70 as well as two weldments in the NVE 36 steel, are in excellent agreement with the results of the research conducted by Aurich et al. [Analyse und Weiterentwicklung Bruchmechanischer versagenskonzepte--Lokales Risswachstum, Ermittlung des Risswiderstandsverhaltens aus der Kerbslagarbeit. BAM Forschungsbericht 192, Berlin 1993, ISBN 3-89429-329-2] for structural and pressure vessel steels to the German DIN standard steels including St 52-3, StE 355 and StE 460.     

Copper(II) removal from aqueous solutions by fly ash

The removal of Cu(II) by adsorption on fly ash has been found to be concentration, pH and temperature dependent. The kinetics of adsorption indicates the process to be diffusion controlled. The Langmuir constants have been calculated at different temperatures, and the adsorption has been found to be endothermic (ΔH = 15.652 kcal mol^?1). The maximum removal is observed at pH 8.0, and variation in adsorption with pH has been explained on the basis of surface ionisation and complexation.     

A kinetic model for the acid-oxygen pressure leaching of Ni–Cu matte

A semi-empirical mathematical model for the acid-oxygen pressure leaching of Ni–Cu matte is presented, based on data from batch leaching experiments. The primary controlling factor in the leaching process is found to be galvanic inhibition of the more highly oxidized copper and nickel sulfide species by less oxidized species, particularly Ni alloy and Ni₃S₂. The leaching rate of many species is greatly reduced by the presence of one or both of these phases, and others will not commence leaching until neither is present. The mathematical model is based on first-order chemical reaction controlled rate expressions, as the reactions occurring are electrochemical in nature. Mass transfer effects are included only empirically. Some possibly diffusion-related phenomena are noted, although the model is not extended to incorporate these effects on a fundamental level. The model is verified and extended by the inclusion of several different factors that were tested experimentally. The effects of variations in O₂ flow rate and partial pressure, initial particle size, reaction pulp density and initial acid concentration were all studied, and included in the model. Variations in O₂ flow rate and partial pressure are found to affect the reaction rates via the dissolved oxygen concentration in the solution phase.     

The influence of silicon on carbon redistribution in steel weldments

Carbon redistribution was measured in ST1/ST2 Fe-2.5Si-0.8C/Fe-0.32Si-0.49C steel weldments in the temperature range 500–1000 °C. At the temperatures where austenite exists, carbon diffuses from ST1 into ST2; when ferrite is present, the diffusion flow reverses from ST2 into ST1. This effect is attributed to the degree of the silicon influence on the graphite precipitation and carbon activity in ST1 and ST2 steels. The opposite signs of the activity gradients in austenite and ferrite cause the reversal of the carbon diffusion when the annealing temperature is changed from the austenite to the ferrite temperature region. The carbon diffusion coefficients D_C and the thermodynamic interaction coefficients ε_C^Si in austenite have been assessed from the experimental data for ST1 and ST2 steels.     

Buckling experiments on steel silo transition junctions: I: Experimental results

Large elevated steel silos for the storage of bulk solids generally consist of a cylindrical vessel above a conical discharge hopper supported on a cylindrical skirt. The cone–cylinder–skirt transition junction is subject to a large circumferential compressive force which is derived from the horizontal component of the meridional tension in the conical hopper, so either a ring is provided or the shell walls are locally thickened to strengthen the junction. Extensive theoretical studies have examined the buckling and collapse strengths of these junctions, leading to theoretically based design proposals. However, no previous experimental study on steel silo transition junctions has been reported due to the considerable difficulties associated with testing these thin-shell junctions at model scale. This paper presents the results of a series of tests on cone–cylinder–skirt–ring junctions in steel silos under simulated bulk solid loading. In addition to the presentation of test results including geometric imperfections and failure behavior, the determination of buckling modes and loads based on displacement measurements is examined in detail.     

导磁不锈钢毛的结构化研究

研制了一种新型的结构化钢毛——胶结钢毛。和传统的普通钢毛相比,胶结钢毛具有很强的结构刚度和很低的钢毛流失量;同时,对高岭土有较高的除铁效率。