基于金纳米-植酸胶束混合组装的过氧化氢传感器的电化学研究

采用混合组装技术,利用植酸胶束(IP6micelles)的磷酸酯键络合辣根过氧化物酶(HRP)和金纳米粒子(GNPs),形成了具有生物亲和性的纳米复合材料,保持了辣根过氧化物酶的生物活性,并利用金纳米粒子的高电子密度、介电特性和催化性能,实现了HRP与玻碳电极(GCE)表面的直接电子转移。Nafion膜的滴加能提高电极的选择性和稳定性。实验过程中借助紫外-可见吸收光谱和透射电子显微镜进行表征,实验结果证明:GNPs的高导电和高催化性能,结合植酸胶束的优良生物相容性和对酶的高负载量的特点,使得吸附在其上的HRP保持活性,制备的生物传感器能对H2O2进行电催化还原。Nafion/HRP-IP6micelles-GNPs/GCE对H2O2的线性浓度范围为5×10-7～1.15×10-5mol/L(线性相关系数r=0.993,n=9),最低检测限为0.1μmol/L(信噪比S/N=3),米氏常数为0.002 4 mmol/L。     

An electrochemical study of the dissolution of gold in thiosulfate solutions. Part II. Effect of Copper

Thiosulfate has been considered as one of the most promising of the non-toxic alternatives to cyanide for the leaching of gold and much work has been carried out with the aim of understanding and improving the ammoniacal thiosulfate leaching process. In particular the behaviour of gold in thiosulfate solutions containing copper in the absence of ammonia has received little attention. It has been shown in this study involving electrochemical and leaching tests that copper ions catalyze not only the oxidation of thiosulfate but also the dissolution of gold in alkaline thiosulfate solutions. Electrochemical studies have shown that copper has a positive effect on the anodic dissolution of gold with increasing concentrations of copper resulting in higher dissolution rates of gold at a potential of 0.3V. Studies on the dissolution of gold powder in alkaline oxygenated thiosulfate solutions containing low concentrations of copper have shown that the role of copper in enhancing the dissolution rate of gold is possibly associated with the formation of a copper–thiosulfate–oxygen intermediate which is more reactive in terms of cathodic reduction than dissolved oxygen. The electrochemical experiments have been complemented by a leaching study which has shown that milling of gold powder in the presence of copper (added as ions, metal, or oxide) assists with the dissolution of gold in thiosulfate solutions.     

铜及其合金电解仿金着色工艺

详细介绍了一种铜及铜合金阴极还原着仿金色工艺及其配方。探讨了该工艺的着色原理、电流密度的影响及所得着色膜层的性能。结果表明，该工艺所得的膜层呈金黄色，结晶致密，耐蚀性好。     

自含砷合碳难处理金矿中提取金的研究─Ⅰ.氨水脱砷-石灰加压氧化-氰化

针对甘肃省坪定金矿含金、砷高、金部分地赋存于脉石、脉石为碱性、属于难选难冶矿的特点，提出了氨水脱砷－石灰加压氧化－氰化新工艺．当原矿含金8．7g／t及13．0％砷时，砷可脱除95％，金可浸出85％．技术及经济指标预计均较满意．     

Initial Deposition of Colloidal Particles on a Rough Nanofiltration Membrane

The initial rate of colloid deposition onto semi‐permeable membranes is largely controlled by the coupled influence of permeation drag and particle‐membrane colloidal interactions. Recent studies show that the particle‐membrane interactions are subject to immense local variations due to the inherent morphological heterogeneity (roughness) of reverse osmosis (RO) and nanofiltration (NF) membranes. This experimental investigation reports the effect of membrane roughness on the initial deposition of polystyrene latex particles on a rough NF membrane during cross flow membrane filtration under different operating pressures and solution chemistries. Atomic force microscopy was used to characterize the roughness of the membrane and observe the structure of particle deposits. At the initial stages of fouling, the AFM images show that more particles preferentially accumulate near the “peaks” than in the “valleys” of the rough NF membrane surface.     

内蒙古花敖包特银铅锌矿床成矿特征研究与物化探勘查进展

花敖包特铅锌银矿床是近年来新发现的位于大兴安岭南段西坡银多金属成矿带上一重要矿床。自2000年通过土壤地球化学测量与激电测量发现本矿床以来,相继对该矿床进行了一系列地质基础理论研究以及有效勘查,包括通过各种地质方法揭示矿体成矿规律、探查矿体控制要素,运用物探勘查技术（高精度磁测、瞬变电磁法以及激电测量等）、化探勘查技术（土壤地球化学测量以及深穿透地球化学技术等）以及三维地质建模技术对矿区深部及其外围进行勘查,取得了一些新的认识,通过这些勘查研究显示本矿床在深部和外围仍具有良好的成矿前景。     

Reserve estimation of an open pit mine under price uncertainty by real option approach

Reserve estimation is a key to find the correct NPV in a mining project. The most important factor in reserve estimation is the metal price. Metal price fluctuations in recent years were exaggerated, and imposed a high degree of uncertainty to the re-serve estimation, and in consequence to the whole mine planning procedure. Real option approach is an efficient method of deci-sion making in the uncertain conditions. This approach has been used for evaluation of defined natural resources projects until now. This study considering the metal price uncertainty used real option approach to prepare a methodology for reserve estimation in open pit mines. This study was done on a copper cylindrical deposit, but the achieved methodology can be adjusted for all kinds of deposits. This methodology was comprehensively described through the examples in such a manner that can be used by the mine planners.     

江西浒坑钨矿含矿韧性剪切带及其^40Ar-^39Ar年代学约束

江西省浒坑钨矿是一个大型石英脉黑钨矿矿床,含矿石英脉除了块状石英脉以外,还大量发育条带状石英脉。本文针对条带状石英脉进行了专门研究,认为条带状石英脉实质上是韧性剪切带,以透入性发育的剪切面理和拉伸线理、剪切透镜体、剪切分异条带普遍发育为特色。剪切带岩石以石英质糜棱岩为主,具有丰富的塑性变形显微构造特征。显微剪切指向构造统计表明,东西向和北西向脉组的运动方式均以左旋正滑为主,近水平脉组则以正滑为主。北西向韧性剪切带的新生绢云母^40Ar-^39Ar坪年龄为140．3±1．0Ma,相应的等时线年龄为139．6±2．4Ma;而东西向韧性剪切带绢云母^40Ar-^39Ar坪年龄则比较复杂,高温阶段年龄可能受到成矿期白云母残斑的影响,中温阶段的表观年龄和总气体年龄更接近前一样品的坪年龄。据此认为韧性剪切变形的年龄为140Ma左右,韧性变形发生在成岩和成矿之后。条带状石英脉系块状石英脉韧性剪切改造而成,推测其形成主要与晚期补充岩体的斜向上侵作用有关,但更为合理的模式需要更多资料的进一步证实。     

广西老堡铅锌矿褶皱形成机制及其控矿规律

老堡铅锌矿床主要赋存在陡山沱组白云岩或老堡组硅质岩中,顺层产出,受地层与褶皱的双重控制。矿区主干褶皱为一复式向斜,由2个次级向斜和1个次级背斜组成。从构造几何学、运动学角度,运用现代测试技术,对矿区的小构造、显微构造和组构进行构造分析后揭示,老堡褶皱构造的形成机制是以弯滑作用为主、兼具弯流作用的纵弯褶皱作用的产物。铅锌矿体主要赋存在褶皱的转折端虚脱部位及两翼滑移量较大的层间滑动破碎带中。