HPV16型免疫胶体金诊断试纸条的制备

建立一种快速、准确、简便检测高危型人乳头瘤病毒16型的胶体金诊断试纸条,以用于宫颈癌的早期筛查。用柠檬酸三钠还原法制备了酒红色的30 nm胶体金颗粒,胶体金颗粒标记的单抗的实际标记量为6μg/mL。选用了2种稳定剂BSA和PEG20000获得了稳定的金标抗体溶液。实验结果表明:第7种样品垫处理液和第7种结合垫处理液处理样品垫和结合垫组装的试纸条效果最好;试纸条检测HPV16E6蛋白为阳性,检测HPV16L1蛋白为阴性。     

对苯二酚在金、银纳米粒子修饰的玻碳电极上电化学响应的比较

制备了柠檬酸钠保护的金和银纳米粒子,并用自组装法制备了金和银纳米粒子修饰的玻碳电极,在近中性的磷酸缓冲溶液中,比较研究对苯二酚在金和银纳米粒子修饰玻碳电极上的电化学响应情况。结果表明金和银纳米粒子均对对苯二酚的电氧化过程具有优越的电催化效果;与银纳米粒子修饰电极相比,金纳米粒子修饰电极表现出了良好的稳定性;对苯二酚在金纳米粒子修饰玻碳电极上的电化学反应是受扩散控制的。     

Preparation of Gold Nanorods of High Quality and High Aspect Ratio

We report the synthesis of gold nanorods (NRs) by seed-mediated growth method. A small amount of different shapes such as triangles, hexagons and a large amount of rods are obtained by varying the proportion of seed to metal salt, adding NaOH to growth solution as well as using the seed solution of CTAB-capped agent. The gold nanorod (NR) formation yield is improved. Meanwhile, the growth mechanism of high yield gold NRs is discussed. The high quality single size NRs can be separated from polydisperse sampl...     

大孔强酸树脂吸附硫脲金

研究了D072大孔强酸性阳离子交换树脂从硫脲[Tu=CS(NH2)2]浸金液中吸附Au(Tu)2+的性能和机理. 结果表明，pH=2.0时，树脂对Au(Tu)2+有优良的吸附性能，金的交换容量为78.95 mg/g (Au/干树脂)，吸附的硫脲金可用乙醇-硫酸水溶液洗脱，洗脱率可达96.5%. D072树脂对Au(Tu)2+的吸附符合Langmuir吸附模型.     

气固错流移动颗粒床过滤器压降特性研究

研究了错流移动颗粒床过滤器操作压降与过滤介质特性、表现过滤气速、颗粒层移动速度和床层粉尘沉积量之间的关系。结果表明，无粉尘沉积时，床层压降可以用Ergun方程计算。颗粒层移动速度的变化并不会造成床层压降的显著变化。除尘过程中，床层内粉尘沉积量随气体中粉尘浓度的增大、颗粒层移动速度的减小而增加，同时将导致床层压降的显著增大。错流移动床除尘操作压降可以用带修正项的Ergun方程计算，其修正项为比沉积率和颗粒层空欧率的函数。在实验数据范围内，该方程的计算结果与实验数据最大偏差小于15％。     

Aromatization of n-hexane on Mo2C catalysts

The deposition-precipitation method was used to prepare gold catalysts based on different supports. Their catalytic activities for combustion of carbon monoxide (CO) and formaldehyde (HCHO) were investigated. All these catalysts showed good activity for the two reactions and the Au/CeO₂-a catalyst exhibited the highest activity for the two reactions. Furthermore, catalysts derived from the as-precipitate hydroxides exhibited higher activity than that from corresponding oxide supports. The BET, XRD, TEM and XPS were carried out. The results indicated that the gold dispersed more homogeneous on the as-precipitate hydroxide supports than that on the corresponding oxide supports.     

人血清淀粉样蛋白A1原核表达及胶体金检测方法的建立

通过胶体金免疫层析技术建立一种特异、便捷、快速的SAA1定量检测新方法.利用大肠杆菌BL21(DE3)原核表达人血清淀粉样蛋白A1(SAA1),根据BL21(DE3)表达偏好性设计并合成SAA1蛋白基因片段,构建表达载体pET-28a-SAA1,采用CaCl2法制备BL21(DE3)感受态,热激转化法将pET-28a-SAA1转入到BL21(DE3).经表达条件优化,获得重组蛋白最佳诱导表达条件:温度30℃,时间6h,转速180rpm/min,培养基pH 7.0,IPTG浓度0.4mM,诱导表达后目的蛋白经SDS-PAGE电泳鉴定,Ni柱纯化、透析、浓缩从而获得浓度为8.09mg/ml,纯度为85%的SAA1.同时,结合胶体金标记技术,建立了SAA1胶体金免疫层析试纸检测方法,线性范围0.16~500μg/ml,最低检测限0.16μg/ml,该研究为临床体外诊断SAA1快速检测提供技术基础.     

Comparisons of Fly Ash and Deposition Between Air and Oxy-FuelCombustion in Bench-Scale Fluidized Bed with Limestone Addition

In Oxy-fuel circulating fluidized bed, the residual CaO particles may react with high concentration of CO₂ in flue gas to form bonded deposit on heat transfer surfaces in backpass when limestone is used as a sorbent to capture SO₂.In this paper, experiments were designed on ash deposition in a bench-scale fluidized bed under oxy-fuel and air atmosphere. A novel ash deposit sampling probe was used to simulate the tubes of tail surfaces. The chemical composition of fly ash and ash deposit from both air-firing and oxy-fuel firing cases were analyzed by Inductively Coupled Plasma-Atomic Emission Spectrometry(ICP-AES) and Scanning Electron Microscopy(SEM), respectively. The degrees of carbonation reaction of ash deposits were measured by Thermo Gravimetric Analysis. The results showed that there are distinct differences in fly ash deposition rate between oxy-fuel and air firing cases, and oxy-fuel combustion with limestone addition can affect chemical composition of fly ash and ash deposit, especially for elements of Ca, Na, K, and S. However, the carbonation reaction degree of ash deposits is found weak, which is due to the relatively low CaO content in ash deposit or not long enough of the sampling time.[JP]     

Risk reduction in Sechahun iron ore deposit by geological boundary modification using multiple indicator Kriging

Uncertainty on the geological contacts and the block volumes of the models along boundaries is often a major part of the global uncertainty of reserve estimation.This work introduces a geostatistical technique that has been developed and tested in an iron ore deposit at Bafq mining district,in central Iran,and that,based on a probability criterion,helps to objectively model the geometry of this iron ore deposit.The main problem in reserve estimation of this ore body is its geometrical modeling and uncertainty in geological boundaries.This work deals with the geostatistical method of multiple indicator kriging,which is used to determine the real boundaries of ore body in different categories.This approach has potential to improve project performance and decrease operational risk.For this purpose,the ore body is separated into two categories including rich iron zone （w（Fe）〉45%） and poor iron zone （20%〈w（Fe）〈45%）.It significantly benefits to decrease the risk of reserve evaluation in the deposit.This case study also highlights the value of multiple indicator kriging as a tool for estimates the position of grade boundaries within the deposit.Comparison of the resultant probability maps with the real ore/waste contacts on the extracted levels shows that the first indicator model could separate the whole ore body （poor plus rich） from the waste zone by probability of more than 0.35,which concludes the total reserve of 53 million tons.The second indicator model applied to separate the rich and poor domains and the results show that the blocks with the estimated probability of equal to or more than 0.4 lay within the rich ore zone consisting of 15.8 million tons reserve.     

Investigation of thickness and wax content of wax deposits in polyethylene pipe using a flow loop

In this study, the thickness and wax content of wax deposits were found to be thinner and lower in the polyethylene (PE) pipe than in the stainless steel (SS) pipe using a flow loop apparatus. The diffusivity of wax, radial thermal gradient, and wax precipitation rate in the PE and SS pipes were calculated and compared. It was found the diffusivity of wax in the PE pipe was higher and tended to enhance the wax deposition in the PE pipe, while the radial thermal gradient and wax precipitation rate were lower in the PE pipe and had the opposite effects. These factors are shown to be comparable with each other and the effect of the thermal gradient dominates the mass flux of wax from bulk to the oil-deposit interface and into the deposits finally, thus causing differences in thickness and wax content of deposits between the PE and SS pipes.