X5045电路及其应用

X5045是一种集看门狗、电压监控和串行EEPROM三种功能于一身的可编程控制电路，文中介绍了它的主要特点和工作原理，同时结合8051单片机给出了MPU与X5045的接口电路与相应的读写程序。     

台式毛细管放电X光激光装置调试实验

对自行研制的台式毛细管放电X光激光装置进行了系统调试,在充氩气毛细管负载下,输出电流38kA,电流脉冲前沿40ns,并对有关问题进行了讨论.并在这个装置上开展充氩气毛细管放电荧光光谱实验研究.     

基于超表面的低雷达散射截面宽频贴片阵列天线设计

该文设计了一种基于超表面(MS)的低雷达散射截面(RCS)宽频贴片阵列天线。该天线由工作在不同频段的两种开缝贴片天线组成2×4的八元阵,以此实现天线小型化并扩展其带宽,根据相位相消原理,将两种人工磁导体(AMC)以棋盘布阵的方式组成超表面加载到天线阵周围,使其具有低RCS特性。实测和仿真结果表明：加载超表面后,天线工作带宽由5.7~6.2 GHz扩展为5.6~6.6 GHz,相对带宽增大1倍,辐射特性基本保持不变;当平面波垂直入射时,天线单站RCS减缩效果明显,其中,X极化波下3 dB减缩带宽为5.3~7.0 GHz,最大减缩量达31 dB,Y极化波下3 dB减缩带宽为5.8~6.9 GHz。     

3英寸CdTe/Si复合衬底外延技术研究

报道了采用分子束外延法,在3 in硅衬底上通过As钝化、ZnTe缓冲层生长、CdTe生长、周期性退火等工艺进行CdTe/Si复合衬底制备技术研究情况,采用光学显微镜、X射线高分辨衍射仪、原子力显微镜、红外傅里叶光谱仪和湿化学腐蚀等手段对碲化镉薄膜进行了表征,测试分析结果表明碲化镉薄膜的晶向得到了较好的控制,孪晶得到了抑制,且具有较好晶体结构质量和均匀性。     

Closed-form solutions for key performance measures of packet multiplexers with finite capacity queue

We revisit the packet multiplexer with a discrete-time single server queue of limited capacity, and we derive a set of exact closed-form solutions for the major performance measures, such as the distributions of queue length, waiting time and number of lost packets per arriving batch. Assuming equally utilised inputs, the results refer to batch arrivals of binomial and Poisson distributed size, whereas they generally hold for systems with two inputs. The analysis is based on both the commonly used Early Arrival and Late Arrival queueing models, and we show that these models are equivalent at any capacity in terms of both waiting time and loss probability if the Late Arrival queue can hold one additional packet compared to its Early Arrival counterpart.     

PIC16C65单片机在扫描隧道显微镜中的应用

简要阐述了扫描隧道显微镜的基本组成及扫描成像原理，介绍了一种以PIC16C65单片机为微处理器的扫描隧道显微镜电子学系统的组成和接口电路以及部分接口子程序。     

Nanoporous Silver Thin Films: Multifunctional Platforms for Influencing Chain Morphology and Optical Properties of Conjugated Polymers

Disordered nanoporous silver (NPAg) thin films fabricated by a thermally assisted dewetting method are employed as a platform to influence chain alignment, morphology, and optical properties of three well‐known conjugated polymers. Grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) measurements show that the porous structure of the metal induces close π–π stacking of poly(3‐hexylthiophene) (P3HT) chains and extended, planar chain conformations of poly(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl) (PFO) and poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐(benzo[2,1,3]thiadiazol‐4,8‐diyl)] (F8BT). A greater degree of vertically‐oriented P3HT chains are found on NPAg compared with planar Ag. However, PFO and F8BT chain alignment is only affected when pore size is large. The optical properties of NPAg films are investigated by transmission and back‐scattering spectroscopies. Strong back‐scattering is observed for all NPAg morphologies, especially for NPAg with small pore sizes. Photoluminescence spectroscopy of conjugated polymer layers on NPAg showed pronounced emission enhancements (up to factors of 26) relative to layers on glass. The enhancements are attributed primarily to: 1) redistribution of conjugated polymer emission by Ag; 2) redirection of emission by polymer‐filled nanopores; and 3) local electromagnetic field effects. This work demonstrates the potential of NPAg‐thin films to influence molecular chain morphology and to improve light‐extraction in organic optoelectronic devices.     

MgZn铁氧体（偏转）磁性材料的X射线光谱测定与研究

提出了用Ｘ射线光谱仪粉末压片法熔融片法测定ＭｇＺｎ铁氧体各组分浓度的方法,对粉料的制备,均匀性状态颗粒度进行了一系列试验。     

X，Y定标方法在触摸屏中的应用

文章从屏前Ｘ，Ｙ位置如何定标的共同问题出发，讨论了常用的几种触摸屏光学的、电阻式、电容式和超声式的原理性结构和性能，最后还阐述了它们的应用场合     

输气管道环焊缝表面裂纹管道极限载荷计算方法

为了便于对天然气长输管道环焊缝缺陷进行准确快速的安全评估,建立了考虑裂纹尖端奇异性的含环焊缝缺陷的有限元模型,计算了不同缺陷尺寸下的管道环焊缝裂纹J积分,分析了焊缝匹配系数及材料硬化指数对J积分的影响,进而研究了基于J积分理论的含缺陷管道的极限载荷影响因素,并在此基础上提出了适用于特定匹配系数和材料硬化指数情况下能够实现J积分及极限载荷快速求解的工程计算公式。研究结果表明:①根据有限元计算结果拟合的工程计算公式具有较高的精度,可以满足较大缺陷几何尺寸范围内J积分求解,实现含环焊缝裂纹缺陷的管道极限载荷求解;②含环焊缝缺陷管道的裂纹J积分与缺陷尺寸、材料属性以及焊缝匹配系数密切相关,含缺陷管道的极限载荷会随着裂纹尺寸的增加而降低,而随着材料硬化指数的增大而增大;③对含环焊缝中心线处表面裂纹的X80钢制管道而言,低匹配焊接管道极限承载能力要弱于高匹配或等匹配焊接管道。结论认为,该研究成果可为现役输气管道的安全评价及完整性管理提供参考。