Hollow Pd/MOF Nanosphere with Double Shells as Multifunctional Catalyst for Hydrogenation Reaction

A new type of hollow nanostructure featured double metal‐organic frameworks shells with metal nanoparticles (MNPs) is designed and fabricated by the methods of ship in a bottle and bottle around the ship. The nanostructure material, hereinafter denoted as Void@HKUST‐1/Pd@ZIF‐8, is confirmed by the analyses of photograph, transmission electron microscopy, scanning electron microscopy, powder X‐ray diffraction, inductively coupled plasma, and N₂ sorption. It possesses various multifunctionally structural characteristics such as hollow cavity which can improve mass transfer, the adjacent of the inner HKUST‐1 shell to the void which enables the matrix of the shell to host and well disperse MNPs, and an outer ZIF‐8 shell which acts as protective layer against the leaching of MNPs and a sieve to guarantee molecular‐size selectivity. This makes the material eligible candidates for the heterogeneous catalyst. As a proof of concept, the liquid‐phase hydrogenation of olefins with different molecular sizes as a model reaction is employed. It demonstrates the efficient catalytic activity and size‐selectivity of Void@HKUST‐1/Pd@ZIF‐8.     

热处理非晶态Ni-P合金镀层的晶化过程

运用电沉积的方法在45钢基体上制备Ni-P合金镀层,使用差示扫描量热法(DSC)和热重法(TG)分析非晶态NiP合金镀层在20℃/min加热速率下的热效应和质量变化。在300℃和400℃分别对镀层进行0,15,30,45,60,75min的热处理,采用扫描电镜(SEM)、能谱仪(EDS)、X射线衍射仪(XRD)、显微硬度计对镀层进行表征。结果表明:Ni-P合金镀层在加热过程中的放热峰出现在284.8℃处,镀层的质量和元素组成稳定;晶化过程经历了非晶态、亚稳态NiP和Ni5P2、稳定态Ni3P的转变;经过热处理后,镀层的显微硬度显著提高,最大值达1036.56HV,约为镀态的2倍;热处理态镀层的耐NaCl溶液腐蚀性能比镀态有所下降,但两者都比45钢基体好。     

半固态触变挤压对ZA27合金组织和力学性能的影响

通过与常规铸造方法的比较,研究半固态触变挤压对ZA27合金变质、热处理组织和力学性能的影响。结果表明:半固态挤压态合金的密度较铸态合金提高了3%,合金经Sc变质或者半固态挤压都获得了细小而均匀的近似球状组织,而Sc变质结合半固态挤压的球状组织具有最高的圆整度;经T6热处理的半固态挤压合金由细小的初生α相和共析(α+η)组织组成,说明半固态挤压可促进ε相溶解、减少三元共晶(β+η+ε)组织的含量。力学性能测试表明,ZA27合金经半固态挤压+Sc变质+T6热处理后其抗拉强度,伸长率和布氏硬度分别达到586.01MPa,17.57%及171HB。     

高熵合金氮化物薄膜的研究进展

基于多元高熵合金思想制备的高熵合金氮化物薄膜由于多种元素相互混合,易于产生高熵效应、晶格畸变效应和缓慢扩散效应,使得该新型薄膜体系形成简单的非晶结构和纳米晶结构。依赖于成分和制备工艺,多元高熵合金氮化物薄膜表现出简单的固溶体结构和优异的性能,因而在许多领域极具应用潜力。综述了高熵合金氮化物薄膜的发展概况、组织特点、性能特征、制备方法和应用前景,并对高熵合金氮化物薄膜的发展方向进行了展望。     

Metal microparticle – Polymer composites as printable,bio/ecoresorbable conductive inks

Biologically and environmentally resorbable electronic devices support application possibilities that cannot be addressed with conventional technologies. This paper presents highly conductive, water-soluble composites that can be printed to form contacts, interconnects, antennas, and other important features that are essential to nearly all systems of this type. An optimized material formulation involves in situ polymerization to yield a polyanhydride containing a dispersion of molybdenum microparticles at appropriate concentrations. Comparisons of essential physical and electrical properties of these materials to those of composites formed with other polymers and other metal microparticles reveal the relevant considerations. Various functional demonstrations of screen-printed test structures and devices illustrate the suitability of these conductive inks for use in water-soluble electronic devices. A key advantage of the material introduced here compared to alternatives is its ability to maintain conductance over significant periods of time while immersed in relevant aqueous solutions. Studies involving live animal models establish the biocompatibility.     

Electrochemical corrosion behavior of 2A02 Al alloy under an accelerated simulation marine atmospheric environment

The corrosion behavior of 2A02 Al alloy under simulated marine atmospheric environment has been studied using mass-gain, scanning electron microscope/energy dispersive spectroscopy (SEM/EDS), laser scanning confocal microscopy, X-ray diffraction spectroscopy and localized electrochemical methods. The results demonstrate that the relationship between the corrosion induced mass-gain and the corrosion time is in accordance with the power rule. The mass-gain increases gradually during the corrosion time, while the corrosion rate decreases. With ongoing of the corrosion, corrosion products film changed from a porous to a compact structure. The various spectroscopic data show that the corrosion products films composed mainly of Al(OH)₃, Al₂O₃ and AlCl₃. The electrochemical corrosion behavior of the 2A02 Al alloy was studied by electrochemical impedance spectroscopy (EIS).     

Rolling texture and its effect on tensile property of a near-α titanium alloy Ti60 plate

Rolling texture and its effect on tensile properties of Ti60 alloy plates were investigated in the present study. The plates wereβ-rolled at 1070℃ and(α+β)-rolled at 980℃, using uni-directionally rolling(UDR) and cross-directionally rolling(CDR) processes, respectively.β-rolled plates exhibited weak textures, which were attributed to the dispersive orientations of secondary α during the β→α phase transformation. Strong deformation textures formed in(α+β)-rolled plates as a result of slipping mechanisms: the strong T-type texture in UDR plate was related to {10 1 0}[11 2 0] slipping, while the B-type texture in CDR plate was relevant with {0001}[11 2 0] slip. Strong T-type textures led to anisotropic tensile properties. B-type textures would decrease such an anisotropy. The(α+β)-CDR process was found to be a candidate process for reducing anisotropy of Ti60 alloy plates.     

Effects of Fe concentration on microstructure and corrosion of Mg-6Al-1Zn-xFe alloys for fracturing balls applications

Mg-6Al-1Zn-xFe (x = 0, 1, 3, 5 and 7 wt%) alloys were prepared by powder metallurgy and followed by hot extrusion. Majority of Fe element exists as insoluble particles in the alloys. The as-extruded alloys showed higher degradable rates but less stable mechanical properties than as-annealed alloys. Corrosion rate of all the alloys increased with increasing Fe concentration, reaching 2.4 mL cm⁻² h^-1. 0.2% yield strength of all the alloys was higher than 150 MPa. In short, Mg-6Al-1Zn-xFe alloys have an attractive combination of corrosion and mechanical properties, which holds a bright future for fracturing balls applications.