铜蒸汽激光器双闸流管触发系统的研究

研制成用于钢蒸汽激光器的双间流管触发系统。用两个闸流管并联进行交替触发，总输入电功率达7．8kW。低功率运行时，激光器的效率为0．6％与单间流管激光器的效率一致。     

A storage heat pump using an ‘ozone-friendly’ refrigerant

The paper describes the integration of a chemical and a vapour-compression heat pump for energy storage applications. The vapour-compression system is designed to operate using the UK cheap rate ‘Economy 7’ electricity tariff. The system is characterized thermodynamically using various refrigerant/absorbent pairs in the chemical storage circuit and an ozone-friendly refrigerant, R134a, in the vapour-compression circuit. Results indicate that the H₂O/Na₂S pair provides a high energy storage density and is the most suitable for use in this system. The paper also describes the design features of a domestic-sized version of this heat pump system. Air in the sunspace (conservatory) of a house was used as a heat source for the heat pump.     

Degradation of polyethylene terephthalate films in the presence of lubricants for HFC 134a: a critical issue for hermetic motor insulation systems

Earlier studies conducted in the use of sealed tubes with polyalkylene glycol lubricants and polyethylene terephthalete (PET) films revealed that the PET films exhibited embrittlement and (visual) degradation. This led to an investigation of PET embrittlement mechanisms with the new lubricants used with HFC 134a. The lubricants studied were three polypropylene glycols (the monol, the diol and the completely end-capped glycols), pentaerythritol ester and a blend of monol and ester. The effects of moisture content, temperature and lubricant structure were studied. All lubricants in this study were of viscosity grade ISO-32 (150 SUS). The results were compared to PET film embrittlement in the presence of CFC 12 and mineral oil. This study reconfirmed the earlier findings that the PET films must be dried to lower than 0.1 wt.% moisture content for use in hermetic systems. This paper discusses the effect of the moisture content of the lubricant and the effect of the lubricant structure on PET films. The dependence of the various mechanisms on temperature is shown. Esters and end-capped polyalkylene glycols are recommended for use with HFC 134a.     

TRT入口方管道爆裂原因剖析

介绍了鞍钢7#高炉TRT装置入口方管道爆裂事故经过,进行了原因分析,并提出了解决措施。     

交流变频调速技术在二辊轧机压下系统中的应用

介绍一种采用变频调速技术控制的二辊轧机压下系统。该系统可控制轧机压下系统的速度在工艺要求的范围内无级可调，压下量以数字动态显示，控制准确、操作方便。文中对系统的组成及工作原理作了较详细的介绍。     

An adaptive non‐conforming finite‐element method for Reissner–Mindlin plates

Adaptive algorithms are important tools for efficient finite‐element mesh design. In this paper, an error controlled adaptive mesh‐refining algorithm is proposed for a non‐conforming low‐order finite‐element method for the Reissner–Mindlin plate model. The algorithm is controlled by a reliable and efficient residual‐based a posteriori error estimate, which is robust with respect to the plate's thickness. Numerical evidence for this and the efficiency of the new algorithm is provided in the sense that non‐optimal convergence rates are optimally improved in our numerical experiments. Copyright © 2003 John Wiley & Sons, Ltd.     

Multi-step transformation in numerical renormalization group

We compute the temperature dependent magnetic susceptibility of the single-impurity, two-channel Anderson model with an alternative multi-step numerical renormalization-group transformation, previously applied only to the two-impurity single-channel Kondo model. Compared with the traditional transformation, the new procedure requires substantially less memory and computational time, and opens therefore perspectives for the application of the numerical renormalization-group procedure to more complex Hamiltonians.     

用αβ谱仪测量人工αβ放射性气溶胶体积活度的试验研究

本文介绍了用αβ谱仪系统同时测量αβ谱、实现Ｒｎ／Ｔｈ子体补偿、确定超铀α核素气溶胶体积活度及人工放射性气溶胶总β体积活度的技术途径。利用ＲａＡ、ＲａＣ′ａ峰的二段时间计数可确定空气中ＲａＡ、ＲａＢ、ＲａＣ的气溶胶体积活度，相应的，也能给出ＲａＢ、ＲａＣ对总β计数的贡献。根据一般环境条件下的平衡比，用ＴｈＣ′的。计数修正Ｔｈ子体对αβ测量的影响。￣［２３９］ｐｕ或／和￣［２４１］Ａｍ人工核素的α计数，可通过两段时间分别扣除ＲａＡ、ＲａＣ′拖尾的方法确定；β计数分别扣除Ｒｎ／Ｔｈ子体β贡献即可确定。在本文规定的测量条件下，对室内天然Ｒｎ子体水平在１５Ｂｑ／ｍ￣３以下，超铀α核素气溶胶体积活度的测量下限可达到０．１Ｂｑ／ｍ￣３；即使在７５Ｂｑ／ｍ￣３环境下，人工核素总β的测量下限也可达ｌＢｑ／ｍ￣３以下。     

Design of a high-pressure ebulliometer,with vapor-liquid equilibrium results for the systems CHF2 Cl + CF3 CH3 and CF3 CH2 F + CH2F2

We describe the design and operation of a new high-pressure metal ebulliometer which can operate at pressures to at least 3 MPa in the range 220–400 K. Infinite-dilution activity coefficients are presented for the system CHF₂Cl + CF₃-CH, at 275 K and for the system CF₃-CH₂F + CH₂F₂, at 260, 230, and 300 K. The Wilson activity coellicient model and a virial coefficient model are applied to these systems, and the phase equilibrium conditions are calculated. The results are shown to agree well with predicted and with published measured values. The excess enthalpy is calculated and compared with results from a Peng Robinson equation of state. Vapor densities on the dew curves are given.     

浅谈设备进口过程的管理

自从中国加入WTO以来，国内公司与国外公司的交流越来越频繁，合作也越来越多。本文结合中厚板卷厂炉卷工程轧钢部分的项目建设，介绍了设备进口过程的一些管理程序。