水热温度对玻璃纤维增强HAp-CS涂层的影响

为了制备出结合强度较好的生物涂层,采用水热电泳法在碳/碳复合材料表面成功制备了玻璃微纤维增强的羟基磷灰石——壳聚糖(g(f)/HAp-CS)复合涂层,用x-射线衍射仪、透射电子显微镜、扫描电子显微镜、能谱分析仪、红外傅里叶变换分析仪等测试手段对涂层进行了测试和表征,主要研究了水热沉积温度对复合涂层中HAp晶相和涂层显微结构的影响以及HAp涂层的沉积动力学.结果表明:采用玻璃微纤维增强的HAp-CS涂层,致密性和均匀性有了很大提高,显著减少了复合涂层表面的裂纹;随着水热温度的升高,涂层中HAp的衍射峰逐渐增强,表面形貌得到了有效改善,涂层的致密性和均匀性显著提高;涂层的沉积速率随水热温度的升高而加快,其沉积活化能为14.63kJ/mol.     

一种新的盲源分离拟开关算法

针对电子战中各种信号混叠严重难以分离的现象,在盲源分离开关算法基础上提出一种新的盲信源分离拟开关算法.该算法引入单位对称加权滑动向量来加权每次迭代所得的分离信号作为源信号,用峭度取代原算法的峭度符号位作为判断函数来自适应选择加权相应激活函数,以此优化学习算法,结合信号分选的具体应用,给出了迭代结束的评判方法.计算机仿真实验表明,在强噪声背景影响下,该算法能够更加有效地分离空间未知多源线性混叠信号,且在分离效果、稳定性、处理速度和抗噪性能上都比原算法有较大改进.     

Thermal activation and radiation quenching characteristics and their application to the pre-dose dating of porcelain

The pre-dose technique is important for thermoluminescence (TL) dating of porcelain. The principle of pre-dose dating is based on two characteristics: thermal activation and radiation quenching of the porcelain. Based on these principles, two measurement methods, "the activation method" and "the quenching method", respectively, have been developed for evaluation of the porcelain paleodose. The paleodose values obtained are the same for the ages in the range of 100―1000 a BP for porcelains measured by these two methods. But for dating at lower age limits (less than 100 a BP), the activation method is more accurate; conversely, at higher age limits (greater than 1000 a BP) the quenching method is more accurate. In addition, two specific calculating methods are described for a few porce-lains having anomalous activation and quenching characteristics that make these two methods invalid.     

Discrimination for ablative control mechanism in solid-propellant rocket nozzle

The ablation in solid-propellant rocket nozzle is a coupling process resulted by chemistry, heat and mass transfer. Based on the heat and mass transfer theory, the aero-thermo-dynamic, and thermo-chemical kinetics, the thermal-chemical ablation model is established. Simulations are completed on the heat flow field and chemical ablation in the nozzle with different concentrations, frequency factors and activation energy of H2. The calculation results show that the concentration and the activation energy of H...     

Investigation of conductivity characteristics of nitrile butadiene rubber vulcanizates filled with semiconducting carbide ceramic

SiC‐ and B₄C‐filled NBR rubber composites were prepared with various volume fractions of filler by a conventional roll‐mill method. The morphological structures of the NBR–SiC and NBR–B₄C composites were analyzed by scanning electron microscopy. The dependence of room‐temperature volume resistivity (ρ_v) on the concentration of filler in the two systems was studied. In addition, variation in the number of current carriers (n), mobility carriers (μ), dielectric constant (ε), and dielectric loss factor (tan δ) on filler concentration in the two systems were investigated in detail. The applicability of composites as negative temperature coefficient (NTCR) linear thermistors was studied by the dependence of volume resistivity on temperature. The resistivity showed negative temperature dependence and changed linearly with temperature parallel. The conduction mechanism of the conductivity of the two composites was analyzed in terms of the computed activation energy and hopping energy. Change in volume resistivity as a function of frequency for the two systems was also investigated. Finally, the dependence of volume resistivity on applied pressure and possible real applications of these composites as transducers in pressure sensors were also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2158–2165, 2007     

Cobalt-Molybdenum Sulfide Catalysts Prepared by In Situ Activation of Bimetallic (Co-Mo) Alkylthiomolybdates

Unsupported cobalt-molybdenum sulfide catalysts were prepared from bimetallic CoMo alkyl precursors by in situ activation during the hydrodesulfurization (HDS) of dibenzothiophene (DBT). The bimetallic CoMo precursors were prepared by reaction of tetraalkylammonium thiomolybdate salts, (R₄N)₂MoS₄ (where R = H, methyl, butyl, pentyl or hexyl), with CoCl₂ in water at a Co/Mo molar ratio of 0.3. These catalysts exhibit a Swiss-cheese-like morphology, high surface areas (from 52 up to 320 m²/g), high content of carbon (C/Mo = 2.2-3.3) and type IV adsorption-desorption isotherms of nitrogen. The in situ activation of these tetraalkylammonium thiobimetalate precursors leads to a mesoporous structure with pore size ranging from 2 to 4.5 nm. X-ray diffraction showed that the structure of unsupported cobalt-molybdenum sulfide catalysts corresponds to a poorly crystalline structure characteristic of 2H-MoS₂ with low-stacked layers. The nature of the alkyl group strongly affects both the surface area and the HDS activity. The catalytic activity is strongly enhanced when using carbon-containing precursors; the CoMo catalysts prepared by in situ activation of Co/[N(C₄H₉)₄]₂MoS₄ presents the highest HDS activity. The highest surface area of the catalysts was observed for the CoMo catalyst formed from Co/[N(C₆H₁₃)₄N]₂MoS₄.     

CORRELATION OF DIFFUSION COEFFICIENTS FOR LIQUIDS AND DENSE FLUIDS WITH TEMPERATURE AND PRESSURE

On the basis of the free volume theory and activation energy concept,a fundamental equation whichtakes into account the effects of temperature and pressure has been developed.By introducing differentexpressions for the free volume and activation energy,several equations for fluid diffusion coefficients were derivedaccordingly.With the van der Waals free volume and intermal energy formula,a three-parameter model for fluiddiffusion coeffficients at moderate pressure was obtained.The grand average absolute deviation percent of 345data points (44 systems)for self-and infinite dilute inter-diffusivities is 2.32,against the results of the model ofCohen and Turnbull,4.13.In particular,by means of the modified Carnahan-Starling free volume equation,afour-parameter model with average abosolute deviation percent 2.64(30 systems,644 data points)for theestimation of dense fluid inter-and self-diffusivities at high pressures and in supercritical conditions was derived.The derived model is superior to the method of L     

On the oxidation kinetics and mechanisms of various SiC-coated carbon-carbon composites

SiC coatings on the surface of C-C were produced by either silicone resin impregnation/ pyrolysis or reaction sintering. Cycles of resin impregnation/pyrolysis produced an SiC coating, on the walls of fine open pores, which was effective in reducing the oxidation rate of C-C and in shifting the transition temperature to a higher value. Unless it is pre-coated with a pyrocarbon layer before sintering, plain reaction sintered SiC has oxidation behaviors similar to those of the above-mentioned SiC. The dense pyrocarbon film deposition on the surface of C-C could form a better SiC film than others. The carbon film homogenized the surface of C-C and a dense SiC film was established. The oxidation of the coated C-C can be modelled by a set of “oxidation resistors” in series and/or in parallel, with each resistor corresponding to an oxidation element. The controlling mechanism can be resolved from the activation energy. A combined resistant layer, consisting of resin impregnation, pyrocarbon film and reaction sintering SiC, showed the best oxidation resistance of any single-layer coated C-C composite.     

桥面不平度随机激励模型

桥面不平度是影响车辆-桥梁振动的主要因素,定量地研究桥面的凹凸不平对车辆-桥辆振动的影响程度,关键是要能够建立一个能正确模拟实际桥面状况的桥面不平度模型.指出了传统的用周期性函数表示不平度模型的缺点,引入随机不平度理念,建立了一种用路面功率谱函数表示桥面不平度的方法,并建立了桥面不平度随机激励时域模型.通过对比分析发现,建立的桥面不平度模型是可信的,从而提供了一种在缺少实测数据时如何通过计算机模拟获得桥面不平度仿真数据的方法.     

Viscosity of binary mixtures. I. mono-, di-, and tri-n-butyl and -n-octylamine with cyclohexane

Viscosities for six binary mixtures of n-butylamine, di-n-butylamine, tri-n-butylamine, n-octylamine, di-n-octylamine, and tri-n-octylamine with cyclohexane have been measured at 303.15 K with an Ubbelohde suspendedlevel viscometer. Deviations of viscosities from a rectilinear dependence on mole fraction are attributed to H-bonding and to the size of alkylamine compounds. The application of the Eyring's theory of activation energy is examined. The free volume theory of Prigogine-Flory-Patterson (PFP) and the experimental excess enthalpy have been used to estimate excess viscosity ln = (ln / ₁ ⁰ – x ₂ ln ₂ ⁰ / ₁ ⁰ ) and corresponding free volume, enthalpy, and entropy contributions for five binary mixtures of tri-n-alkylamine: triethyl, tripropyl, tributyl, trihexyl, and trioctylamine with cyclohexane. A comparison of experimental and theoretical excess viscosities indicates a failure of the PFP theory when two components of the mixture differ considerably in size. The size difference contribution to excess viscosity is related to (V ₂ ^*1/2 – V ₁ ^*1/2 ), where V ₁ ^* and V ₂ ^* are hard-core volumes of two components of the mixture.