太钢不锈冷轧工程防腐蚀施工技术

防腐蚀施工工艺掌握的好坏，直接影响到工程投入生产后的使用寿命，为保证工程质量，以太钢不锈冷轧改造工程冷线防腐为例，对其常发生的质量通病进行认真分析，总结出一套行之有效的施工技术。     

氧气合理利用决策支持系统和空分装置操作仿真系统

分析了钢铁企业空分系统能源管理的特点 ,并开发出降低空分能耗的应用软件 :氧气合理利用决策支持系统和空分装置操作仿真系统。前者可为决策者提供全面的辅助决策信息和决策支持以降低氧气放散 ,实现氧气的合理利用 ;后者既可实现空分装置运行操作的仿真 ,也可实现空分装置的仿真实验和仿真操作 ,为实施空分装置的节能优化运行提供技术支持     

单膛石灰竖窑的改造

我厂竖窑容积为250m^3，设计利用系数为0．85t/(m^3．d)。随烧结产量的不断增加，石灰产量已不能满足烧结生产的需要。为了提高石灰产量，进行了扩容改造，容积由原来250m^3增加到298m^3，并针对目前生产实际提出下一步改造设想。     

加油站油品用体积交接存在的问题及建议

叙述了目前加油站在实行按任意温度下的体积交接，由于未考虑油品体积随温度、压力、密度的变化，出现了零售损耗很大的问题。建议加油站在现阶段采用“准标准体积”交接；在由体积转换为质量计算加油站损溢时，使用油库当月发出的平均密度；当财会核销损溢时，不使用盘存的体积和固定密度进行计算的方法，而使用实际盘点的质量数，以真实反映加油站的当期损溢。     

开流形的曲率与拓扑

应用比较几何的方法研究了完备非紧且具有特定曲率条件的黎曼流形，证明了在一定Pinching条件限制下，流形具有有限拓扑型或者微分同胚于R^n。     

Particle Penetration through Inclined and L-Shaped Cracks

This paper presents a particle penetration model predicting particle penetration coefficient (Pp) through a narrow crack of arbitrary incline angles (θ). The objective was to simulate Pp for outdoor-to-indoor particle penetration for residential infiltration conditions. This model assumes laminar infiltration flow and considers particle deposition from both gravitational sedimentation and Brownian diffusion. For micron-sized particles, modeling results indicate that gravitational sedimentation is the major deposition mechanism. Pp increases monotonically with ∣θ∣ because effective particle sedimentation velocity (vs?cos?θ) decreases monotonically with ∣θ∣. For submicron-sized particles (0.1?μm), Brownian diffusion is the major particle deposition mechanism. Because Brownian diffusion is a nondirectional deposition mechanism, crack inclination did not affect Pp. This study applied this model to estimate Pp for L-shaped cracks, and validated modeling results with experiments. Experimental results indicated that inertial impaction and crack entrance cutoff effects were not significant particle deposition mechanisms for the test micron-sized particles. Gravitational sedimentation was the major deposition mechanism. An L-shaped crack can be simulated as the combination of horizontal and vertical sections. This model agreed reasonably with experimental results.     

工业炉燃烧系统应用技术探讨

燃烧及其控制技术是各种火焰炉技术核心，强调高水平燃烧系统应对燃烧全过程进行控制，着重对燃烧系统点火、火焰监测、空燃比比例调节、燃烧过程各参数监控、炉温自动控制等各个方面内容进行了讨论介绍，最后用某天然气加热炉燃烧系统原理图及应用效果进行实例说明。     

Density Measurement of Liquid Ni-Ta Alloys by a Modified Sessile Drop Method

The density of liquid Ni- Ta alloys was measured by using a modified sessile drop method. It is found that the density of the liquid Ni- Ta alloys decreases with the increasing temperature, but increases with the increase of tantalum concentration in the alloys. The molar volume of liquid Ni- Ta binary alloys increases with the increase of temperature ancl tantalum concentration.     

难处理金矿石加石灰焙烧焙砂中CaS的消除

介绍了用空气氧化预浸加石灰焙烧焙砂中的CaS，以消除其对金氰化的影响。预浸后金的氰化浸出率可从58％提高到80％以上。     

Indoor Air Quality: Exploring Policy Options to Reduce Human Exposures

Deciding between the different policy approaches available for reducing human exposures to indoor pollutants is an exceptionally complex task. These options can range from waiting until more definitive information is available to enacting regulatory standards, with many variations in between. This paper presents some of the factors policy-makers must consider in establishing indoor air quality policies, and the role researchers should play in ensuring that indoor air policies are based on the best available scientific information.