冷冻交联制备ZM-CSt-PVA复合凝胶及吸附Cu2+性能

以两性离子单体二甲氨基丙基丙烯酰胺-1-羧酸(ZM)、木薯淀粉(CSt)和聚乙烯醇(PVA)为主要原料,采用"一锅法",通过冷冻交联制备ZM接枝共聚CSt-PVA互穿网络复合凝胶(ZPG2)。使用FTIR、TGA、POM、SEM-EDS对ZPG2进行了表征,评价了ZPG2对Cu~(2+)的静态吸附效果。结果表明:300℃以下,ZPG2的热稳定性良好;ZM的存在可产生反聚电解质效应和化学配位效应,显著提高凝胶吸附能力;在吸附温度25℃、ZPG20.1 g、Cu~(2+)质量浓度2×10~3 mg/L、溶液体积100 mL时,饱和吸附量为199 mg/g;吸附过程符合Langmuir等温吸附模型和准二级动力学模型。     

糠醛加氢制糠醇中γ-Al2O3负载Cu-Zn催化剂的改性研究

采用浸渍法制备Co改性γ-Al₂O₃负载的Cu-Zn催化剂，考察Cu-Zn负载量、Co含量及反应温度等对催化剂性能的影响。结果表明，在413 K、氢气流速0.5 mL·s^－1 和糠醛空速2 h^-1 条件下,当催化剂Cu-Zn/γ-Al₂O₃（Co）中n(Cu)∶n(Zn)∶n(Al)∶n(Co)＝1.0∶2.0∶3.0∶0.51时，糠醇的选择性100％，糠醛转化率94.6％，比使用单纯Cu-Zn/γ-Al₂O₃催化剂的最佳转化率提高11％。     

甲磺酸伊马替尼的合成

以4-甲基-3-硝基苯胺为起始原料,经过缩合、还原、环合等反应制得抗肿瘤药物甲磺酸伊马替尼。并分别讨论了采用无水碳酸钾代替二异丙基乙胺、水合肼和普通催化剂代替铂炭催化剂以及采用异戊醇作为溶剂的优点。最终反应总收率超过50%,用高效液相色谱分析产品纯度在99.5%以上。     

国内外AE／AES生产现状及市场分析

介绍国内外脂肪醇聚氧乙烯醚(AE)和脂肪醇聚氧乙烯醚硫酸盐(AES)的生产现状及供需情况.2003年全球AE的总产能为391.7万t/a,总产量为155.8万t,总消费量为148.3万t;AES的总产能为377.5万t/a,产量约为300万t,消费量约为90万t.2004年我国AE的产能已超过50万t/a,但产量只有15万t,消费量为30.5万t;AES的总产能为37.95万t/a,产量为14万t,市场需求约10万t.最后补充介绍乙氧基化的技术进展.     

Photocatalytic mineralisation of organic compounds: a comparison of flame-made TiO2 catalysts

A comparative photocatalytic analysis was carried out on TiO₂ made in a Flame Spray Pyrolysis (FSP) process and flame-made Degussa P25. Both have similar crystallinity, phase composition, phase segregation and a non-porous surface. Hence comparison was made based on their difference in specific surface area, organic adsorption and the amount of OH• generated upon illumination. The photocatalytic activity tests were carried out using the following series of organic compounds: sucrose, glucose, fructose, maleic acid, glyoxylic acid, oxalic acid, isobutyric acid, phenol and methanol. FSP-made TiO₂ outperformed P25 for saccharides mineralisation, while for phenol and methanol mineralisation P25 was better than FSP-made TiO₂. Similar mineralisation rates were observed for both FSP-made and P25 TiO₂ for the mineralisation of carboxylic acids. This shows that the relative performance of the photocatalysts depends on the type of organic compounds to be degraded. The high surface area and possibly a more efficient interfacial charge transfer of FSP-made TiO₂ provided an efficient pathway for saccharides mineralisation. As for phenol and methanol, the mineralisation rates were higher when using P25 due to the greater amount of OH• radicals generated by this photocatalyst. The fast mineralisation rates of carboxylic acids made degradation of these organic compounds to be less affected by the TiO₂ photocatalyst properties and conditions tested in this work.     

Effects of branching upon some surfactant properties of sulfated alcohols

A study was undertaken to determine the surfactant properties of various sulfated alcohols. Most notably, the Krafft point and the ability to emulsify decane were studied. A series of sulfated Guerbet alcohol and Guerbet alcohol alkoxylate sulfates with 16 carbon atoms and an analogous series based upon cetyl alcohol, a linear C₁₆, were studied as hydrophobes.     

Separation of 1,3-propanediol from glycerol-based fermentations of Klebsiella pneumoniae by alcohol precipitation and dilution crystallization

The separation of 1,3-propanediol from the glycerol-based fermentation broth of Klebsiella pneumoniae plays an important role during the microbial production of 1,3-propanediol. In this paper, the separation of 1,3-propanediol from fermentative broth by a combination of ultrafiltration and alcohol dilution crystallization was investigated. The broth was first filtered by ultrafiltration, and 99% of cells, 89.4% of proteins and 69% of nucleic acids were removed. The obtained broth was further condensed by vacuum distillation, and then alcohol was added. The macromolecular impurities, such as nucleic acids, polysaccharides and proteins, were precipitated, and inorganic and organic salts were crystallized. The optimal volume ratio of alcohol added to the condensed fermentation broth was determined to be 2:1. As a result, proteins, nucleic acids and electric conductivity decreased by 97.4%, 89.7% and 95.8%, respectively, compared with the fermentative broth. The influences of pH and water content in condensed broth on alcohol precipitation and dilution crystallization were also investigated. The experimental results indicated that alcohol precipitation and dilution crystallization was feasible and effective for the separation of 1,3-propanediol from actual fermentation broth. Translated from The Chinese Journal of Process Engineering, 2006, 6(3): 454–457 [译自: 过程工程学报]     

苯甲醇制造方法

阐述了苯甲醇的各种制造方法和国内外发展趋势，指出甲苯氧化制苯甲酸时，副产10%～15%(wt)苯甲醇，分离精制，是一种有重大工业潜力的方法。还提到了“绿色化学”合成路线，指出了各种路线的优缺点。     

Acid-Base Properties of Zirconium, Cerium and Lanthanum Oxides by Calorimetric and Catalytic Investigation

The combined use of calorimetric and catalytic methods for the investigation of the acid-base properties of oxide systems is discussed with reference to the authors' work on pure and doped zirconia samples, ceria-zirconia and ceria-lanthana solid solutions. Adsorption microcalorimetry of ammonia and carbon dioxide had been used to characterize the samples, whose chemical and thermal history was taken into account. The catalytic behavior of these samples in the conversion of 4-methylpentan-2-ol, route to 4-methylpent-1-ene (starting product for the manufacture of polymers of superior technological properties), had also been studied. On the basis of the calorimetric data, a rationale for interpreting the data for the transformation of 4-methylpentan-2-ol is formulated, which takes into account the role of the concentration and strength of the sites in governing the competition among the various mechanisms for dehydration and dehydrogenation.     

淀粉-聚乙烯醇可生物降解塑料研究进展

本文详细综述了近年来国内外淀粉基聚乙烯醇塑料的研究进展。