Dynamic response of a Mindlin elastic rectangular plate under a distributed moving mass

The elastodynamic response of a rectangular Mindlin plate subjected to a distributed moving mass is investigated. The set of governing characteristic partial differential equations that include the effects of shear deformation and rotary inertia is expressed in its dimensionless form. A finite difference algorithm is employed to transform the differential equations into a set of linear algebraic equations. Simply supported edge conditions were used as an illustrative example. The analysis is also valid for other edge conditions. It is found that the maximum shearing forces, bending and twisting moments occur almost the same time. Also, the values of the maximum deflections are higher for Mindlin plates than for non-Mindlin plates.     

某供用电综合楼地下基础底板堵漏防水技术

结合工程概况，分析了负二层地下基础底板渗漏的原因，介绍了防水堵漏方案的设计与优选以及主要施工工艺，实践证明，该工程堵漏防水技术可靠，效果良好，保证了工程的顺利进行。     

舞钢管线钢的开发与生产

系统介绍了舞钢开发的针状铁素体型X70宽厚板的设计思路、工艺特点和实物水平；采用电炉 炉外精炼 连铸 TMCP工艺生产的X70宽厚板满足西气东输专用技术条件的要求，并批量应用在西气东输主干线工程中。     

烧结机双层插板式卸灰阀的研制

烧结机双层卸灰阀由蘑菇头式改为电液推杆插板式，有效地解决了系统卸料及漏风问题，实现了控制自动化，提高了设备作业率，改善了岗位环境。     

Water and salt permeability of reinforcement polymer‐gel composite membrane

The charged mosaic polymer membrane (CMM) without reinforcement and the composite charged mosaic polymer membrane (CCMM) with reinforcement were investigated in terms of salt and water transport (permeability). The composite charged mosaic polymer membrane (CCMM) with reinforcement showed a unique transport behavior such as preferential material transport L_p and ω. Water permeability coefficient, L_p and salt permeability coefficient, ω were estimated by taking account of active layer thickness of composite polymer gel. The L_p and ω values of CCMM with reinforcement were larger than those of CMM without reinforcement. On the other hand, the reflection coefficient of CCMM, σ, showed negative value, which suggested preferential material transport to solvent transport. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

二次电池电极基板用复合多孔金属材料的研究

介绍了一种复合金属多孔体的制备及其方法，首先以泡沫塑料为芯膜，经过导电化处理使其具有导电性，其次进行电沉积金属铁，再进行电沉积金属镍，经过热处理后可制备出复合金属多孔体。该复合金属多孔体用铁取代金属镍，其抗拉性能优于单质泡沫镍，同时可以降低制造成本，主要用于载体如电池电极。     

综合线损分析系统研究

描述了综合线损分析系统应该具有的主要功能和分析内容，介绍了系统实现中应该注意的几个问题、系统内容和实现方法。     

制盐设备用不锈钢及复合板的选材

OOCr18Ni5Mo3Si2(以下简称18－5）属铁素体（α）－奥氏体（γ）双相不锈钢，具有良好的耐Cl^-点蚀和应力腐蚀性能，18－5不锈钢复合板因其兼备优良的使用性能和较低的制造成本，在制盐领域不锈钢材料中，是理想的选择。本就OOCr18Ni5Mo3Si2双相不锈钢及复合板的性能、特点以及在制盐领域的成功事例作一介绍。     

Quantification of the layer dispersion degree in polymer layered silicate nanocomposites by transmission electron microscopy

As the performance of polymer layered silicate nanocomposites strongly depends on their interior layer dispersion, quantification of the layer dispersion degree is needed. In this work, a new methodology was developed to determine the dispersion parameter D_0.1, based on the measurement of the free-path spacing distance between the single clay sheets from the transmission electron microscopy (TEM) images. Several examples of exfoliated, intercalated, and immiscible composites were studied. It was found that the exfoliated composites had D_0.1 over 8%, while that of intercalated composites were between 4 and 8%. In the case of intercalation, a high frequency peak appeared at a short spacing distance in the histogram, which was a characteristic of the intercalation, distinct from the exfoliation. The main utility of this TEM methodology is for the quantification of exfoliated or intercalated samples with small number of layers with stacks. The dispersion parameter D_0.1 below 4% was suggested to classify as immiscible. A unique advantage of the TEM measurement is that the dispersion degree of different fillers can be counted individually.     

CFG桩复合地基在某高层建筑地基处理中的应用

结合具体工程实例,进行了CFG复合地基作为一种高层建筑地基处理方法的研究,对加固机理和设计步骤作了阐述,并对加固效果进行了检测分析,可供类似工程地基处理作参考。