高碱值烷基苯磺酸钙的制备研究

以烷基苯磺酸、氢氧化钙、氧化钙和二氧化碳为原料,甲苯为溶剂,甲醇为促进剂,制备高碱值烷基苯磺酸钙,考查了原料配比、反应时间等对产品投入产出比和总碱值的影响,结果表明,合成工艺的最佳条件为:氧化钙和氢氧化钙与烷基苯磺酸的摩尔比为2.5∶1,氧化钙和氢氧化钙的摩尔比为1∶10,促进剂甲醇的用量为2.2 mol,中和反应时间为0.5 h,水加入量为8.4 mol,二氧化碳导入速率为100 mL/m in,二氧化碳导入量为1 mol。产品投入产出比大于70,总碱值接近400。     

次氯酸钠水溶液稳定性的研究及应用

对次氯酸钠(NaClO)水溶液的稳定性进行了试验观察，经过对次氯酸钠水溶液有效氯含量的测定，提出了保持次氯酸钠溶液稳定性的一些应用方法。     

提高次氯酸钠溶液稳定性

通过次氯酸钠溶液有效氯含量的测定，对次氯酸钠溶液的稳定性进行了初步分析探讨，提出了一些应对措施。     

Synthesis and characterization of poly(urethane‐ester)s based on calcium salt of mono(hydroxybutyl)phthalate

Calcium‐containing poly(urethane‐ester)s (PUEs) were prepared by reacting diisocyanate (HMDI or TDI) with a mixture of calcium salt of mono(hydroxybutyl)phthalate [Ca(HBP)₂] and hydroxyl‐terminated poly(1,4‐butylene glutarate) [HTPBG₁₀₀₀], using di‐n‐butyltin‐dilaurate as catalyst. About six calcium‐containing PUEs having different composition were synthesized by taking the mole ratio of Ca(HBP)₂:HTPBG₁₀₀₀:diisocyanate (HMDI or TDI) as 3:1:4, 2:2:4, and 1:3:4. Two blank PUEs were synthesized by the reaction of HTPBG₁₀₀₀ with diisocyanate (HMDI or TDI). The polymers were characterized by IR, ¹H NMR, Solid state ¹³C‐CP‐MAS NMR, TGA, DSC, XRD, solubility, and viscosity studies. The T_g value of PUEs increases with increase in the calcium content and decreases with increase in soft segment content. The viscosity of the calcium‐containing PUEs increases with increase in the soft segment content and decreases with increase in the calcium content. X‐ray diffraction patterns of the polymers show that the HMDI‐based polymers are partially crystalline and TDI‐based polymers are amorphous in nature. The dynamic mechanical analysis of the calcium‐containing PUEs based on HMDI shows that with increase in the calcium content of polymer, modulus (g′ and g″) increases at any given temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1720–1727, 2006     

Kinetics of Slag Hydration in the Presence of Calcium Hydroxide

The reaction between ground granulated blast furnace slag (GGBFS) having an empirical formula of C_7.88S_7.39M₃A and calcium hydroxide (CH) was investigated. The kinetics of the reaction were explored. Thermogravimetric analysis was used to monitor the consumption of CH from which rate constants were determined. Based on Knudsen's kinetic model, activation energies of 14.5, 17.9, and 22.6 kJ/mol were determined for three different mass ratios of slag and CH reacted over a temperature range of 15° to 50°C and hydrated for a period of time from 0 to 32 days. A comparison of the kinetics of the slag/CH reaction was made with slag/portland cement hydration. The basic features of both appear similar.     

粉煤灰水泥基材料的水化产物

用热重仪-差示扫描量热仪、扫描电子显微镜、透射电子显微镜、X射线能量散射、高分辩电子显微镜、压汞仪,测定了粉煤灰水泥基材料水化产物的形貌特征、微观结构、化学组成及水泥石的孔结构,讨论了水化产物性质及水泥石孔结构随粉煤灰掺量的变化规律。结果表明：粉煤灰的大量掺加,可以改善凝胶的化学组成。水化后期,粉煤灰与Ca(OH)2及由熟料水化生成的高n(Ca)／n(Si)的水化硅酸钙(C—S—H)凝胶发生二次水化反应,生成低n(Ca)／n(Si)的C—S—H凝胶,此种凝胶的固碱能力强,可减少碱-集料反应的危害性。同时,二次水化产物能够填充那些对水泥石强度和耐久性极为不利的孔隙空洞,使水泥石的结构更加致密,优化水泥石的孔结构,对提高水泥基材料的耐久性作用极大,为进一步提高工业废渣利用的技术水平奠定了基础。     

Effect of calcium aluminate cement variety on the hydration of portland cement in blended system

Two kinds of CACs with different monocalcium aluminate（CA） contents were used in the PC/CAC（PAC） mixtures. Effects of CA and CACs on the properties of PAC were analyzed by setting times and the compressive strength tests, and also by means of calorimetry, XRD, DTA-TG and ESEM. The experimental results show that the compressive strength of the PAC mortars decreases with increasing content of CAC while it declines sharply with a higher content of CA in CAC. Compared with neat PC paste, the content of calcium hydroxide in hydrates of PAC paste decreases significantly, and the hydration time of PC is prominently prolonged. Additionally, the higher the content of CA in CAC, the more obviously the hydration of PC is delayed, confi rming that the CA phase in CAC plays an important role in the delay of PC hydration.     

Synthesis of calcium silicate hydrate based on steel slag with various alkalinities

This study aimed to improve the hydraulic potential properties of the slag. Therefore, a method of dynamic hydrothermal synthesis was applied to synthesize calcium silicate hydrate. The phases and nanostructures were characterized by XRD, FTIR, TEM, and BET nitrogen adsorption. The infl uence of alkalinity of steel slag on its structures and properties was discussed. The experimental results show that, the main product is amorphous calcium silicate hydrate gel with fl occulent or fi brous pattern with a BET specifi c surface area up to 77 m2/g and pore volume of 0.34 mL/g. Compared with low alkalinity steel slag, calcium silicate hydrate synthesized from higher alkalinity steel slag is prone to transform to tobermorite structure.     

AZ91D镁合金表面环保型钙系磷化膜的制备及其耐蚀性

采用化学转化处理的方法,在AZ91D镁合金的表面制备了均匀致密的钙系磷化膜,其中磷化液配方中不含铬、氟及亚硝酸盐等对环境有害的离子。通过场发射扫描电子显微镜和X射线衍射仪研究了磷化时间及温度对磷化膜结构和相组成的影响。结果表明:磷化时间为20min,磷化温度为40℃时,所得到的磷化膜的致密性和均匀性较好。与空白基体相比,经磷化处理后的镁合金在3.5%NaCl溶液中的耐腐蚀性能明显提高。     

Impact of sand and filler materials on the hydration behavior of calcium aluminate cement

In earlier work, we have observed discrepancies relating to the early hydration of calcium aluminate cement (CAC) when comparing data from heat flow calorimetry of CAC paste with results from mortar strength tests using the crushing method. Here, we investigated on this phenomenon and found that the sand which is used as a filler exerts a major influence on CAC hydration resulting in acceleration. Furthermore, in particular fine filler materials such as, for example, microsilica, fine limestone powder, and especially α- and γ-Al₂O₃ also produced a strong hydration accelerating effect which is dependent on their specific surface area. The mechanism underlying the acceleration is that under alkaline conditions their negative surface charge attracts calcium ions as was confirmed via inductively coupled plasma atomic emission measurements. Such a layer generates favourable conditions for the nucleation of CAC hydration products (C-A-H phases). The resulting crystalline hydrates which form on the surface of the filler particles submerged in CAC cement pore solution were visualized via SEM imaging. This way, specifically selected fillers can significantly accelerate CAC hydration and save precious lithium salts which are commonly used to boost the early strength of CAC.