铸造湿型小件缺陷产生的原因与控制

通过对铸造湿型小件产品缺陷典型实例的原因分析，从型砂的选择及配制、造型工艺、浇注工艺等方面提出控制缺陷产生的工艺方法。     

武钢第二炼钢厂连铸坯喷号机自动控制系统

对武钢第二炼钢厂连铸坯喷号机自动化控制景统配置、网络通讯、伺服控制系统进行了阐述；经运行考验证明系统性能提高、稳定可靠。     

论薄板坯连铸连轧产品质量优势

通过对薄板坯连铸连轧工艺的分析，深入研究了其产品的质量优势，同时还指出了在产品生产过程中需要重点注意解决的一些问题。     

板坯连铸机二切短流程生产线的开发和应用

3^#板坯连铸机二切工序一直不能正常工作，采用了在线切割工艺，根据切割条件和切割周期等参数，结合板坯连铸出坯线短、车间小的特点，确定二切机的位置在距一切终止点15m处。改进了清渣系统，采取了升降挡板和定尺板相结合的定尺方式，设定不同的辊道运输速度等措施，保证了二切设备的正常运行，实现了板坯的热送热装．     

Synthesis, Characterization, and Cytotoxicity Analysis of a Biodegradable Polyurethane

A polyester urethane was synthesized for use in a biodegradable scaffold. The polyurethane was synthesized in a two-step process: first, ester diol was synthesized from lactic acid and polyethylene glycol 400 (PEG 400), then it was polymerized with toluene diisocyanate using dibutyl tin dilaurate (DBTDL) as a catalyst to form a polyester urethane. Polyester urethane has tensile strength of 51-59 MPa and elongation at fracture of 369-439%. FTIR and XRD were used to confirm the formation and structure of the polymer. Hydrolytic degradation was studied in different alkali solutions and in saline water. In order to assess the cellular response of this material, cytotoxicity analysis was carried out against the cell line.     

Detection and modification of confusing color combinations for red‐green dichromats to achieve a color universal design

Color‐vision deficiency is a relatively common genetic condition, which often leads to the obstruction of necessary information in colored images. It is important to minimize such inconvenient effects in communication using colored images from a universal design perspective. The universal design principle stipulates that all environments and products should be usable by all people, regardless of age, physical attributes, and ability. This article proposes a method to detect color combinations in a given image that would confuse color dichromats, and suggests a way in which to modify them to make the image easily distinguishable for both normal and dichromatic observers. Confusing color combinations were detected based on a color‐difference calculation using simulations of how the color would appear to dichromats. The confusing colors were then modified based on the minimization of an evaluation function, which was defined as the sum of the degree of confusion and the degree of color change from the original image. Several colored images obtained by the proposed method were compared with the originals by red–green dichromatic observers who judged them to be clearer, thereby confirming that the proposed method was effective for color rendering for universal design. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 203–211, 2008     

济钢小板坯连铸机φ360mm拉辊优化改造

为解决小板坯连铸机φ360mm拉辊断颈、断辊问题，对拉辊原设计及现场使用条件进行了分析，将材质由55^#锻钢改为35CrNiMo，辊身与辊颈处改为圆锥台式，同时加大辊颈处过渡圆弧并磨削处理，延长水冷孔通过辊颈圆弧，从而使拉辊寿命由3～4个月延长到10～12个月，减少了事故损失，加快了生产节奏，年直接经济效益达49万元。     

连铸稀土加入工艺试验

对多流大方坯连铸机生产稀土钢的稀土加入工艺进行了试验,分析了钢包、中间包、结晶器喂稀土丝的优缺点,并进行了对比。根据包钢大方坯连铸工艺的特点和实际情况,选出了大方坯连铸稀土钢的稀土加入工艺。     

基于ANSYS的铸嘴流体耦合场三维有限元仿真分析

作者用大型有限元分析软件ANSYS对铸嘴内稳态层流铝熔体进行仿真分析。实现了三维建模。解决了三维热一流耦合求解的问题，得到铝流体的速度、压力及温度的分布图。分析了铸嘴出口速度和温度的分布规律及其对连续铸轧的影响。     

改进工装设计提高轴承座的铸造质量

文章通过对轴承座铸件的工艺分析，提出了采用双面型板脱箱的造型工艺，通过实践证明该工艺提高了该铸件的生产效率和制造质量。