改性己二胺制备TG301环氧树脂室温固化剂

已二胺经与环氧树脂进行羟烷基化及与丙烯腈进行氰乙基化反应达到改善低熔点低毒性．低脆性的综合效果．文中介绍了改性乙二胶固化剂的制备方法，质量指标和有关固化特性等．     

修正型罗德里格斯参数在旋转弹上的应用

光纤陀螺可应用于旋转弹导航上,以提高其精确打击能力。基于光纤陀螺的捷联惯性导航系统是实现这一目的的重要手段之一。其中,姿态更新算法是捷联惯性导航系统的核心。针对旋转弹短时、近程的特点,提出一种基于修正型罗德里格斯参数的全姿态更新算法,并给出适合旋转弹姿态确定的数学模型。仿真结果表明与传统姿态更新算法相比较,新算法可以更有效的抑制不可交换误差,降低跟随时间的累积误差,减少高动态环境下的计算量,提高算法结算的速度和精度。     

Low‐voltage and high‐transmittance blue‐phase liquid‐crystal device with slanted electrodes

Abstract— A low‐voltage (～10 V_rms) and high‐transmittance (～90%) polymer‐stabilized blue‐phase liquid‐crystal (BPLC) device with a slanted‐electrodes structure is proposed. Unlike the vertical‐field‐switching (VFS) mode in which oblique incident light and a vertical field are employed, the proposed device utilizes normal incident light and an oblique field. The slanted electrodes generate a strong and uniform oblique electric field, which contributes in obtaining low voltage and high transmittance. Moreover, no couple films or prism sheets are needed, which helps to enhance the optical efficiency and simplify of the device structure. This device has great potential application for emerging BPLC displays and photonic devices.     

一种新的修正恒模算法

阐述了恒模算法(CMA)、修正恒模算法(MCMA)和判决引导(DD)算法的基本原理。针对CMA和MCMA收敛速度慢,固定步长条件下收敛速度和剩余误差之间存在矛盾的缺陷,在分析CMA误差特性的基础上,利用DD算法误差函数的模值和判决器输出构造新的误差函数,提出了一种新的变步长MCMA。新算法在加快收敛速度的同时保持小的剩余误差。仿真结果表明,新算法比CMA和MCMA收敛速度快,均衡输出剩余码间干扰(ISI)小而且能克服相位偏移,具有很好的实用性。     

以1,3-二(4-邻羟基苯亚胺次甲基)苯氧基丙烷为载体的铁离子(Ⅲ)电极的研究

以1,3-二(4-邻羟基苯亚胺次甲基)苯氧基丙烷为中性载体制备了PVC膜Fe3+离子选择性电极。该电极对Fe3+呈现出良好的选择性和近Nernst电位响应性能。电极斜率为21mV/dec,线性范围为3.0×10-5～1.0×10-1mol/L,检出限为1.0×10-5mol/L。采用交流阻抗技术研究了电极的响应机理,并将电极作为指示电极初步用于EDTA的电位滴定。     

基于2,4-二羟基苯甲酸铜(Ⅱ)为载体的硫氰酸根电极的电位响应

制备了基于一种简单的金属铜配合物2,4-二羟基苯甲酸铜(Ⅱ)(Cu(Ⅱ)DHBA)为载体的PVC膜硫氰酸根离子(SCN-)选择性电极。该电极在1.0×10-1～1.0×10-6mol/LSCN-浓度范围内呈现斜率为-59.5mV/dec的近Nernst电位响应,检测下限为9.1×10-7mol/L。利用紫外可见光谱及交流阻抗技术初步探讨了电极对SCN-呈现的选择性电位响应机理。该电极作为直接电位分析法的指示电极,成功运用于实验室废水中硫氰酸盐含量的测定。     

Electrochemical investigation of the iron-containing and no iron-containing AB5-type negative electrodes

The electrochemical behaviour of LaNi_3.55Mn_0.4Al_0.3Co_0.75−xFe_x (x = 0, 0.15, 0.55, 0.75) intermetallic compounds has been studied and presented [C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, Int. J. Hydrogen Energy 29 (2004) 307–311; C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, J. Alloys Compd. 360 (2003) 266–271; C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, J. Alloys Compd. 384 (2004) 249–253]. It has been deduced that the LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compound has interesting electrochemical properties. In this paper we present the electrochemical study of LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compound properties compared with the parent LaNi_3.55Mn_0.4Al_0.3Co_0.75 compound. Several techniques, such as, the chronopotentiometry, the constant potential discharge (CPD), the cyclic voltammetry (CV) and the linear polarization (LP) were applied to characterize these electrochemical properties. The electrochemical discharge capacity of the LaNi_3.55Mn_0.4Al_0.3Co_0.75 alloy increases to reach 294 mAh g⁻¹ after few cycles only (five cycles). However, the activation of the LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 alloy takes more than 20 cycles to be achieved and the obtained maximum discharge capacity is 194 mAh g⁻¹. The hydrogen diffusion coefficient D_H was determined by constant potential discharge and cyclic voltammetry techniques. The obtained values of the LaNi_3.55Mn_0.4Al_0.3Co_0.75 and LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compounds are 6.29 × 10⁻¹¹ and 7.62 × 10⁻¹¹, and 2 × 10⁻⁸ and 7.5 × 10⁻⁸ cm² s⁻¹ by CPD and CV techniques, respectively. The exchange current density values, determined by a linear polarization technique, are 44 and 27 mA g⁻¹, respectively, for LaNi_3.55Mn_0.4Al_0.3Co_0.75 and LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 alloys.     

小波变换在伺服焊枪电极位移曲线分析中的应用

电极位移曲线能够反映出点焊规范参数波动，是一个理想的监控参数。采用离散Daubechies4阶小波对电极位移曲线进行滤波处理，成功地将测量曲线分为电极位移趋势曲线、波动曲线。这两种曲线分别反映了点焊质量的整体质量优劣、过程一致性这两方面特征，提高了位移曲线表征焊接过程的能力，为伺服焊枪的点焊质量控制提供了准确、优良的数据基础。     

二元稀土系AB5型贮氢电极合金的放电容量与晶胞体积和4f电子浓度的关系

制备了6个系列通式为AαA‘1-αB5的RE(NiCoMnTi)5贮氢电极合金(其中，AαA‘1-α为La，Ce，Pr，Nd4个元素中任意2个的组合)，测定了它们在100次循环中的最大放电容量Cmax及部分合金的晶胞体积Vcell．结果表明：Cmax主要由Vcell决定，Cmax先随Vcell的增大而增加，在Vcell≈85．66x10^-^3。nm^3时达到一极大值，然后又随Vcell的增大而减小；同时，Cmax还与4f电子浓度ne4f／naRE有关，A侧具有相同4f电子浓度的合金其Cmax随4f电子浓度的变化趋势相似．     

Preparation of β-cyclodextrin/SBS modified asphalts for the improvement of anti-aging,rheological property,and storage stability

Styrene-butadiene-styrene (SBS) modified asphalt (SMA) has been widely used in road engineering for decade. However, the phase separation of SMA was obvious during the transport and SBS degraded after aging. To resolve these problems, β-cyclodextrin (β-CD) was used to modify SMA in this work. Conventional properties, storage stability, the effect of short-term aging on the morphology, and rheological property for SMA and β-CD/SMA were investigated. The softening point of modified asphalt reached to the maximum of 66.7°C when 1 wt% β-CD was added to SMA, where the penetration had shown the minimum of 80.8 dmm. In addition, the ductility of β-CD/SMA increased to the maximum of 797 mm when the content of β-CD was increased to 5 wt%. Furthermore, incorporation of β-CD improved the storage stability of SMA. Importantly, the aggregation of SBS was observed in β-CD/SMA, but modifiers distributed uniformly after a short-term aging. The rutting resistance and antiaging performances of SMA were also improved by the addition of β-CD. Considering the comprehensive properties of modified asphalt, the optimum content of β-CD was found to be 2 wt%.