丙烯酸二甲氨基乙酯的合成

以丙烯酰氯与二甲氨基乙醇为原料 ,乙醚为溶剂 ,过量的二甲氨基乙醇为缚酸剂合成了丙烯酸二甲氨基乙酯。较佳实验条件为 :丙烯酰氯 /二甲氨基乙醇 /乙醚 (物质的量比 ) 1∶2 .0 5∶5 .6 ,反应温度 5℃ ,反应时间 4h ,w(吩噻嗪 ) 0 .5 0 %,产物为无色透明液体 ,相对密度 0 .943 1( 2 0℃ ) ,折光率为 1.435 2 ,收率大于 91%。     

三氯乙酰氯的合成与应用

综述了三氯乙酰氯的合成方法及其在农药、医药等领域中的应用。     

辉锑矿矿浆电解浸出机理的研究

研究了辉锑矿矿浆电解阳极室浸出反应机理．结果表明，辉锑矿的溶解符合核收缩模型的动力学规律，浸出速率受混合过程控制，表观活化能为25.10KJ/mol．浸出主反应是辉锑矿被阳极上析出的氯氧化，SCl2是氧化反应的中间产物．     

佛尔哈德法测定氯化除汞上清液中的氯量

控制pH4-6，用锌粉还原氯化除汞上清液中的汞（Ⅱ）离子，取置换后液加入过量的硝酸银标准溶液，以硫酸铁铵溶液作指示剂，用硫氰酸钾标准滴定溶液滴定来测定氯量。该方法的检出限：0．25mg／100mL，回收率：98％-101％。     

镇沅金精矿选择性固砷焙烧—氰化浸出新工艺研究

对云南镇沅金矿的难当金精矿进行了选择性固砷焙烧－氰化浸出的试验研究，取得了满意结果。砷固定率大于９２％，硫挥发率为７８％－８４％，金浸出率可达９１％－９３％。选择性固砷焙烧－氰化浸出新工艺可有效消除砷害，综合利用有价成分硫，特别适宜于含砷高硫，同时含碳等杂质的细粒浸染型难浸金矿石的处理，在我国有较大的发展前景。     

从氯化铅渣中回收铅铋的研究

本文以柿竹园有色金属矿粗铋火法精炼、气化除铅产出的铅渣为原料，在常压下采用氯化钠水溶液进行浸出处理，有效地分离了铅和铋，并将铅制成了化工产品黄丹及硫酸铅     

在高速气流粉碎作用下PVC的力化学降解及形态变化的研究

通过ＧＰＴ、ＦＴ－ＩＲ、ＳＥＭ和力学性能测试，研究了在高速气流作用下聚氯乙烯（ＰＶＣ）的力化学降解反应、颗粒形态和微晶结构变化及其对ＰＶＣ物理、力学性能的影响。实验结果表明，经过高速气流处理ＰＶＣ，分子量将有所降低，晶体结构发生变化，颗粒尺寸和表观密度降低，比表面积增大，加工性能和力学性能得到明显改善。     

Factors Affecting 1-Octen-3-ol in Mushrooms at Harvest and During Postharvest Storage

Harvesting experiments revealed that immature whole mushrooms with closed veils had higher 1-octen-3-0l levels than more mature whole mushrooms with open veils. The l-octen-3-01 content of the gills was higher in immature mushrooms with closed veils, gradually decreased with maturity as the veil opened, and finally increased after the gills were well exposed. Postharvest experiments demonstrated that storage temperature influenced the activity of lipoxygenase-hydroperoxide lyase, but no differences in 1-octen-3-01 content were observed. Enzyme activity as well as 1-octen-3-01 content decreased during storage. Addition of calcium chloride to irrigation water, employed to improve quality and shelf life of fresh mushrooms, increased the amount of l-octen-3-01 immediately after harvest.     

Pitting corrosion of Cr–Mn–N steel in sulphuric acid media

The resistance to pitting corrosion of austenitic stainless steel Cr18Mn12N has been studied in model solutions of sulphuric acid (0.5 m) containing chloride ions (0.5 m). The cyclic potentiodynamic method has been employed to investigate the effects of chloride ions and agitation rate on the pitting and repassivation potentials. Electron and optical microscopy, electron diffraction spectroscopy and atomic absorption spectrometry have been used to detect the surface sites for pit formation and the growth of pit nuclei. The results obtained with chromium–manganese–nitrogen steel have been compared with those of austenitic Cr18Ni9 stainless steel. A similarity in pit initiation is established, while steel composition exhibits no significant effect. Cr18Mn12N steel is less prone to repassivation as compared with Cr18Ni9 steel.